caiyu/LibreVNA
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Use full multiplier bitwidth for windowing + increased number of DFT bins

Browse Source
This commit is contained in:
Jan Käberich 2020-11-07 17:10:41 +01:00
parent a2389fca13
commit 8b9b8265b9
21 changed files with 625 additions and 579 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/DeveloperInfo/FPGA_protocol.tex
View File

@ -386,7 +386,7 @@ Setting & Window type\\
\begin{itemize} \begin{itemize}
\item \textbf{Presc[7:0]:} Amount of FPGA clock cycles between ADC samples. \item \textbf{Presc[7:0]:} Amount of FPGA clock cycles between ADC samples.
$$ SR_{ADC} = \frac{\SI{102.4}{\mega\hertz}}{Presc} $$ $$ SR_{ADC} = \frac{\SI{102.4}{\mega\hertz}}{Presc} $$
The minimum value for this register is 111, which results in a samplerate of roughly \SI{922.5}{\kilo\hertz}. If Presc is set to a lower value, the data acquisition from the ADC is not done when the next sample starts and samples will be skipped. The minimum value for this register is 112, which results in a samplerate of roughly \SI{914.3}{\kilo\hertz}. If Presc is set to a lower value, the data acquisition from the ADC is not done when the next sample starts and samples will be skipped.
\end{itemize} \end{itemize}
\subsection{Phase Increment: 0x05} \subsection{Phase Increment: 0x05}
@ -446,7 +446,7 @@ See datasheet of MAX2871 for bit descriptions. Bits for the fields N, FRAC, M, V
\label{dft} \label{dft}
In addition to the single bin DFT configured through the ADC prescaler and phase increment registers (see \ref{reg:ADC} and \ref{reg:phaseinc}), the FPGA also includes a multiple point DFT. This DFT only operates on the port 1 and port 2 receivers and is intended to speed up spectrum analyzer measurements. If enabled, the DFT runs in parallel to all other calculations. In addition to the single bin DFT configured through the ADC prescaler and phase increment registers (see \ref{reg:ADC} and \ref{reg:phaseinc}), the FPGA also includes a multiple point DFT. This DFT only operates on the port 1 and port 2 receivers and is intended to speed up spectrum analyzer measurements. If enabled, the DFT runs in parallel to all other calculations.
The DFT has a fixed number of bins (64), but the frequencies these bins correspond to can be changed. The DFT has a fixed number of bins (96), but the frequencies these bins correspond to can be changed.
\subsubsection{DFT\_FIRST\_BIN: 0x12} \subsubsection{DFT\_FIRST\_BIN: 0x12}
\begin{center} \begin{center}

55
FPGA/VNA/DFT.vhd
View File

@ -33,8 +33,8 @@ entity DFT is
Generic (BINS : integer); Generic (BINS : integer);
Port ( CLK : in STD_LOGIC; Port ( CLK : in STD_LOGIC;
RESET : in STD_LOGIC; RESET : in STD_LOGIC;
PORT1 : in STD_LOGIC_VECTOR (15 downto 0); PORT1 : in STD_LOGIC_VECTOR (17 downto 0);
PORT2 : in STD_LOGIC_VECTOR (15 downto 0); PORT2 : in STD_LOGIC_VECTOR (17 downto 0);
NEW_SAMPLE : in STD_LOGIC; NEW_SAMPLE : in STD_LOGIC;
NSAMPLES : in STD_LOGIC_VECTOR (12 downto 0); NSAMPLES : in STD_LOGIC_VECTOR (12 downto 0);
BIN1_PHASEINC : in STD_LOGIC_VECTOR (15 downto 0); BIN1_PHASEINC : in STD_LOGIC_VECTOR (15 downto 0);
@ -45,25 +45,14 @@ entity DFT is
end DFT; end DFT;
architecture Behavioral of DFT is architecture Behavioral of DFT is
COMPONENT dft_result
GENERIC(depth : integer);
PORT(
CLK : IN std_logic;
READ_ADDRESS : in integer range 0 to depth-1;
WRITE_ADDRESS : in integer range 0 to depth-1;
DATA_IN : IN std_logic_vector(191 downto 0);
WE : IN std_logic;
DATA_OUT : OUT std_logic_vector(191 downto 0)
);
END COMPONENT;
COMPONENT result_bram COMPONENT result_bram
PORT ( PORT (
clka : IN STD_LOGIC; clka : IN STD_LOGIC;
wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0); wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
addra : IN STD_LOGIC_VECTOR(5 DOWNTO 0); addra : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
dina : IN STD_LOGIC_VECTOR(191 DOWNTO 0); dina : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
clkb : IN STD_LOGIC; clkb : IN STD_LOGIC;
addrb : IN STD_LOGIC_VECTOR(5 DOWNTO 0); addrb : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
doutb : OUT STD_LOGIC_VECTOR(191 DOWNTO 0) doutb : OUT STD_LOGIC_VECTOR(191 DOWNTO 0)
); );
END COMPONENT; END COMPONENT;
@ -75,14 +64,6 @@ COMPONENT SinCos
sine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0) sine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)
); );
END COMPONENT; END COMPONENT;
COMPONENT SinCosMult
PORT (
clk : IN STD_LOGIC;
a : IN STD_LOGIC_VECTOR(15 DOWNTO 0);
b : IN STD_LOGIC_VECTOR(15 DOWNTO 0);
p : OUT STD_LOGIC_VECTOR(31 DOWNTO 0)
);
END COMPONENT;
COMPONENT DSP_SLICE COMPONENT DSP_SLICE
PORT ( PORT (
clk : IN STD_LOGIC; clk : IN STD_LOGIC;
@ -120,16 +101,16 @@ END COMPONENT;
signal read_address : integer range 0 to BINS-1; signal read_address : integer range 0 to BINS-1;
signal write_address : integer range 0 to BINS-1; signal write_address : integer range 0 to BINS-1;
signal read_address_vector : std_logic_vector(5 downto 0); signal read_address_vector : std_logic_vector(7 downto 0);
signal write_address_vector : std_logic_vector(5 downto 0); signal write_address_vector : std_logic_vector(7 downto 0);
signal we : std_logic_vector(0 downto 0); signal we : std_logic_vector(0 downto 0);
signal ram_in : std_logic_vector(191 downto 0); signal ram_in : std_logic_vector(191 downto 0);
signal ram_out : std_logic_vector(191 downto 0); signal ram_out : std_logic_vector(191 downto 0);
type States is (WaitingForSample, WaitMult, WaitSinCos, Busy, Ready); type States is (WaitingForSample, WaitMult, WaitSinCos, Busy, Ready);
signal state : States; signal state : States;
signal port1_latch : std_logic_vector(15 downto 0); signal port1_latch : std_logic_vector(17 downto 0);
signal port2_latch : std_logic_vector(15 downto 0); signal port2_latch : std_logic_vector(17 downto 0);
signal phase : std_logic_vector(31 downto 0); signal phase : std_logic_vector(31 downto 0);
signal phase_inc : std_logic_vector(31 downto 0); signal phase_inc : std_logic_vector(31 downto 0);
@ -219,8 +200,8 @@ begin
doutb => ram_out doutb => ram_out
); );
read_address_vector <= std_logic_vector(to_unsigned(read_address, 6)); read_address_vector <= std_logic_vector(to_unsigned(read_address, 8));
write_address_vector <= std_logic_vector(to_unsigned(write_address, 6)); write_address_vector <= std_logic_vector(to_unsigned(write_address, 8));
OUTPUT <= ram_out; OUTPUT <= ram_out;
mult1_c <= ram_out(191 downto 144); mult1_c <= ram_out(191 downto 144);
@ -294,13 +275,13 @@ begin
mult_enable <= '1'; mult_enable <= '1';
read_address <= 1; read_address <= 1;
-- sign extended multiplication -- sign extended multiplication
mult1_a <= port1_latch(15) & port1_latch(15) & port1_latch; mult1_a <= port1_latch;
mult1_b <= sine(15) & sine(15) & sine; mult1_b <= sine(15) & sine(15) & sine;
mult2_a <= port1_latch(15) & port1_latch(15) & port1_latch; mult2_a <= port1_latch;
mult2_b <= cosine(15) & cosine(15) & cosine; mult2_b <= cosine(15) & cosine(15) & cosine;
mult3_a <= port2_latch(15) & port2_latch(15) & port2_latch; mult3_a <= port2_latch;
mult3_b <= sine(15) & sine(15) & sine; mult3_b <= sine(15) & sine(15) & sine;
mult4_a <= port2_latch(15) & port2_latch(15) & port2_latch; mult4_a <= port2_latch;
mult4_b <= cosine(15) & cosine(15) & cosine; mult4_b <= cosine(15) & cosine(15) & cosine;
state <= BUSY; state <= BUSY;
if sample_cnt = 0 then if sample_cnt = 0 then
@ -319,13 +300,13 @@ begin
RESULT_READY <= '0'; RESULT_READY <= '0';
phase <= std_logic_vector(unsigned(phase)+unsigned(phase_inc)); phase <= std_logic_vector(unsigned(phase)+unsigned(phase_inc));
-- sign extended multiplication -- sign extended multiplication
mult1_a <= port1_latch(15) & port1_latch(15) & port1_latch; mult1_a <= port1_latch;
mult1_b <= sine(15) & sine(15) & sine; mult1_b <= sine(15) & sine(15) & sine;
mult2_a <= port1_latch(15) & port1_latch(15) & port1_latch; mult2_a <= port1_latch;
mult2_b <= cosine(15) & cosine(15) & cosine; mult2_b <= cosine(15) & cosine(15) & cosine;
mult3_a <= port2_latch(15) & port2_latch(15) & port2_latch; mult3_a <= port2_latch;
mult3_b <= sine(15) & sine(15) & sine; mult3_b <= sine(15) & sine(15) & sine;
mult4_a <= port2_latch(15) & port2_latch(15) & port2_latch; mult4_a <= port2_latch;
mult4_b <= cosine(15) & cosine(15) & cosine; mult4_b <= cosine(15) & cosine(15) & cosine;
if bin_cnt >= 3 then if bin_cnt >= 3 then
-- multiplier result is available, advance write address -- multiplier result is available, advance write address

238
FPGA/VNA/Sampling.vhd
View File

@ -35,9 +35,9 @@ entity Sampling is
RESET : in STD_LOGIC; RESET : in STD_LOGIC;
ADC_PRESCALER : in STD_LOGIC_VECTOR(7 downto 0); ADC_PRESCALER : in STD_LOGIC_VECTOR(7 downto 0);
PHASEINC : in STD_LOGIC_VECTOR(11 downto 0); PHASEINC : in STD_LOGIC_VECTOR(11 downto 0);
PORT1 : in STD_LOGIC_VECTOR (15 downto 0); PORT1 : in STD_LOGIC_VECTOR (17 downto 0);
PORT2 : in STD_LOGIC_VECTOR (15 downto 0); PORT2 : in STD_LOGIC_VECTOR (17 downto 0);
REF : in STD_LOGIC_VECTOR (15 downto 0); REF : in STD_LOGIC_VECTOR (17 downto 0);
ADC_START : out STD_LOGIC; ADC_START : out STD_LOGIC;
NEW_SAMPLE : in STD_LOGIC; NEW_SAMPLE : in STD_LOGIC;
DONE : out STD_LOGIC; DONE : out STD_LOGIC;
@ -62,13 +62,16 @@ COMPONENT SinCos
sine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0) sine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)
); );
END COMPONENT; END COMPONENT;
COMPONENT SinCosMult COMPONENT DSP_SLICE
PORT ( PORT (
clk : IN STD_LOGIC; clk : IN STD_LOGIC;
a : IN STD_LOGIC_VECTOR(15 DOWNTO 0); ce : IN STD_LOGIC;
b : IN STD_LOGIC_VECTOR(15 DOWNTO 0); sel : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
p : OUT STD_LOGIC_VECTOR(31 DOWNTO 0) a : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
); b : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
c : IN STD_LOGIC_VECTOR(47 DOWNTO 0);
p : OUT STD_LOGIC_VECTOR(47 DOWNTO 0)
);
END COMPONENT; END COMPONENT;
COMPONENT window COMPONENT window
PORT( PORT(
@ -79,12 +82,12 @@ PORT(
); );
END COMPONENT; END COMPONENT;
signal p1_I : signed(47 downto 0); signal p1_I : std_logic_vector(47 downto 0);
signal p1_Q : signed(47 downto 0); signal p1_Q : std_logic_vector(47 downto 0);
signal p2_I : signed(47 downto 0); signal p2_I : std_logic_vector(47 downto 0);
signal p2_Q : signed(47 downto 0); signal p2_Q : std_logic_vector(47 downto 0);
signal r_I : signed(47 downto 0); signal r_I : std_logic_vector(47 downto 0);
signal r_Q : signed(47 downto 0); signal r_Q : std_logic_vector(47 downto 0);
signal clk_cnt : integer range 0 to 255; signal clk_cnt : integer range 0 to 255;
signal sample_cnt : integer range 0 to 131071; signal sample_cnt : integer range 0 to 131071;
signal samples_to_take : integer range 0 to 131071; signal samples_to_take : integer range 0 to 131071;
@ -93,16 +96,15 @@ END COMPONENT;
signal sine : std_logic_vector(15 downto 0); signal sine : std_logic_vector(15 downto 0);
signal cosine : std_logic_vector(15 downto 0); signal cosine : std_logic_vector(15 downto 0);
signal mult1_I : std_logic_vector(31 downto 0); signal mult_a : std_logic_vector(17 downto 0);
signal mult1_Q : std_logic_vector(31 downto 0); signal mult_b : std_logic_vector(17 downto 0);
signal mult2_I : std_logic_vector(31 downto 0); signal mult_c : std_logic_vector(47 downto 0);
signal mult2_Q : std_logic_vector(31 downto 0); signal mult_p : std_logic_vector(47 downto 0);
signal multR_I : std_logic_vector(31 downto 0);
signal multR_Q : std_logic_vector(31 downto 0);
signal last_sample : std_logic; signal mult_enable : std_logic;
signal mult_accumulate : std_logic_vector(0 downto 0);
type States is (Idle, Sampling, WaitForMult, Accumulating, Ready); type States is (Idle, Sampling, P1Q, P2I, P2Q, RI, RQ, SaveP1Q, SaveP2I, SaveP2Q, SaveRI, SaveRQ, Ready);
signal state : States; signal state : States;
begin begin
-- Always fails for simulation, comment out -- Always fails for simulation, comment out
@ -117,49 +119,21 @@ begin
cosine => cosine, cosine => cosine,
sine => sine sine => sine
); );
Port1_I_Mult : SinCosMult
Mult : DSP_SLICE
PORT MAP ( PORT MAP (
clk => CLK, clk => CLK,
a => PORT1, ce => mult_enable,
b => cosine, sel => mult_accumulate,
p => mult1_I a => mult_a,
); b => mult_b,
Port1_Q_Mult : SinCosMult c => mult_c,
PORT MAP ( p => mult_p
clk => CLK,
a => PORT1,
b => sine,
p => mult1_Q
);
Port2_I_Mult : SinCosMult
PORT MAP (
clk => CLK,
a => PORT2,
b => cosine,
p => mult2_I
);
Port2_Q_Mult : SinCosMult
PORT MAP (
clk => CLK,
a => PORT2,
b => sine,
p => mult2_Q
);
Ref_I_Mult : SinCosMult
PORT MAP (
clk => CLK,
a => REF,
b => cosine,
p => multR_I
);
Ref_Q_Mult : SinCosMult
PORT MAP (
clk => CLK,
a => REF,
b => sine,
p => multR_Q
); );
-- sign extend b input of multiplier (sin/cos)
mult_b(17 downto 16) <= mult_b(15) & mult_b(15);
process(CLK, RESET) process(CLK, RESET)
begin begin
if rising_edge(CLK) then if rising_edge(CLK) then
@ -172,15 +146,14 @@ begin
clk_cnt <= 0; clk_cnt <= 0;
sample_cnt <= 0; sample_cnt <= 0;
phase <= (others => '0'); phase <= (others => '0');
mult_enable <= '0';
mult_accumulate <= "0";
else else
-- when not idle, generate pulses for ADCs -- when not idle, generate pulses for ADCs
if state /= Idle then if state /= Idle then
if clk_cnt = unsigned(ADC_PRESCALER) - 1 and last_sample = '0' then if clk_cnt = unsigned(ADC_PRESCALER) - 1 then
ADC_START <= '1';
if sample_cnt < samples_to_take then if sample_cnt < samples_to_take then
sample_cnt <= sample_cnt + 1; ADC_START <= '1';
else
last_sample <= '1';
end if; end if;
clk_cnt <= 0; clk_cnt <= 0;
else else
@ -193,50 +166,116 @@ begin
-- handle state transitions -- handle state transitions
case state is case state is
when Idle => when Idle =>
last_sample <= '0';
sample_cnt <= 0; sample_cnt <= 0;
DONE <= '0'; DONE <= '0';
PRE_DONE <= '0'; PRE_DONE <= '0';
ACTIVE <= '0'; ACTIVE <= '0';
clk_cnt <= 0; clk_cnt <= 0;
phase <= (others => '0'); phase <= (others => '0');
p1_I <= (others => '0'); mult_enable <= '0';
p1_Q <= (others => '0'); mult_accumulate <= "0";
p2_I <= (others => '0');
p2_Q <= (others => '0');
r_I <= (others => '0');
r_Q <= (others => '0');
phase <= (others => '0');
if START = '1' then if START = '1' then
state <= Sampling; state <= Sampling;
samples_to_take <= to_integer(unsigned(SAMPLES & "0000") - 1); samples_to_take <= to_integer(unsigned(SAMPLES & "0000"));
end if; end if;
when Sampling => when Sampling =>
DONE <= '0'; DONE <= '0';
PRE_DONE <= '0'; PRE_DONE <= '0';
ACTIVE <= '1'; ACTIVE <= '1';
mult_enable <= '0';
if NEW_SAMPLE = '1' then if NEW_SAMPLE = '1' then
state <= WaitForMult; sample_cnt <= sample_cnt + 1;
mult_enable <= '1';
mult_a <= PORT1;
mult_b(15 downto 0) <= cosine;
mult_c <= p1_I;
state <= P1Q;
end if; end if;
when WaitForMult => when P1Q =>
DONE <= '0';
PRE_DONE <= '0';
ACTIVE <= '1';
state <= Accumulating;
when Accumulating =>
-- multipliers are finished with the sample
p1_I <= p1_I + signed(mult1_I);
p1_Q <= p1_Q + signed(mult1_Q);
p2_I <= p2_I + signed(mult2_I);
p2_Q <= p2_Q + signed(mult2_Q);
r_I <= r_I + signed(multR_I);
r_Q <= r_Q + signed(multR_Q);
-- advance phase
ACTIVE <= '1'; ACTIVE <= '1';
DONE <= '0'; DONE <= '0';
PRE_DONE <= '0'; PRE_DONE <= '0';
mult_enable <= '1';
mult_a <= PORT1;
mult_b(15 downto 0) <= sine;
mult_c <= p1_Q;
state <= P2I;
when P2I =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '1';
mult_a <= PORT2;
mult_b(15 downto 0) <= cosine;
mult_c <= p2_I;
state <= P2Q;
when P2Q =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '1';
mult_a <= PORT2;
mult_b(15 downto 0) <= sine;
mult_c <= p2_Q;
state <= RI;
when RI =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '1';
mult_a <= REF;
mult_b(15 downto 0) <= cosine;
mult_c <= r_I;
state <= RQ;
when RQ =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '1';
mult_a <= REF;
mult_b(15 downto 0) <= sine;
mult_c <= r_Q;
-- first result is available
p1_I <= mult_p;
state <= SaveP1Q;
when SaveP1Q =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '1';
p1_Q <= mult_p;
state <= SaveP2I;
when SaveP2I =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '1';
p2_I <= mult_p;
state <= SaveP2Q;
when SaveP2Q =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '1';
p2_Q <= mult_p;
state <= SaveRI;
when SaveRI =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '1';
r_I <= mult_p;
state <= SaveRQ;
when SaveRQ =>
ACTIVE <= '1';
DONE <= '0';
PRE_DONE <= '0';
mult_enable <= '0';
r_Q <= mult_p;
-- from now on accumulate results
mult_accumulate <= "1";
phase <= std_logic_vector(unsigned(phase) + unsigned(PHASEINC)); phase <= std_logic_vector(unsigned(phase) + unsigned(PHASEINC));
if last_sample = '0' then if sample_cnt < samples_to_take then
state <= Sampling; state <= Sampling;
else else
state <= Ready; state <= Ready;
@ -245,12 +284,13 @@ begin
ACTIVE <= '1'; ACTIVE <= '1';
DONE <= '1'; DONE <= '1';
PRE_DONE <= '1'; PRE_DONE <= '1';
PORT1_I <= std_logic_vector(p1_I); mult_enable <= '0';
PORT1_Q <= std_logic_vector(p1_Q); PORT1_I <= p1_I;
PORT2_I <= std_logic_vector(p2_I); PORT1_Q <= p1_Q;
PORT2_Q <= std_logic_vector(p2_Q); PORT2_I <= p2_I;
REF_I <= std_logic_vector(r_I); PORT2_Q <= p2_Q;
REF_Q <= std_logic_vector(r_Q); REF_I <= r_I;
REF_Q <= r_Q;
state <= Idle; state <= Idle;
end case; end case;
end if; end if;

14
FPGA/VNA/Test_DFT.vhd
View File

@ -44,8 +44,8 @@ ARCHITECTURE behavior OF Test_DFT IS
PORT( PORT(
CLK : IN std_logic; CLK : IN std_logic;
RESET : IN std_logic; RESET : IN std_logic;
PORT1 : IN std_logic_vector(15 downto 0); PORT1 : IN std_logic_vector(17 downto 0);
PORT2 : IN std_logic_vector(15 downto 0); PORT2 : IN std_logic_vector(17 downto 0);
NEW_SAMPLE : IN std_logic; NEW_SAMPLE : IN std_logic;
NSAMPLES : in STD_LOGIC_VECTOR (12 downto 0); NSAMPLES : in STD_LOGIC_VECTOR (12 downto 0);
BIN1_PHASEINC : IN std_logic_vector(15 downto 0); BIN1_PHASEINC : IN std_logic_vector(15 downto 0);
@ -60,8 +60,8 @@ ARCHITECTURE behavior OF Test_DFT IS
--Inputs --Inputs
signal CLK : std_logic := '0'; signal CLK : std_logic := '0';
signal RESET : std_logic := '0'; signal RESET : std_logic := '0';
signal PORT1 : std_logic_vector(15 downto 0) := (others => '0'); signal PORT1 : std_logic_vector(17 downto 0) := (others => '0');
signal PORT2 : std_logic_vector(15 downto 0) := (others => '0'); signal PORT2 : std_logic_vector(17 downto 0) := (others => '0');
signal NEW_SAMPLE : std_logic := '0'; signal NEW_SAMPLE : std_logic := '0';
signal BIN1_PHASEINC : std_logic_vector(15 downto 0) := (others => '0'); signal BIN1_PHASEINC : std_logic_vector(15 downto 0) := (others => '0');
signal DIFFBIN_PHASEINC : std_logic_vector(15 downto 0) := (others => '0'); signal DIFFBIN_PHASEINC : std_logic_vector(15 downto 0) := (others => '0');
@ -109,11 +109,11 @@ BEGIN
begin begin
-- hold reset state for 100 ns. -- hold reset state for 100 ns.
RESET <= '1'; RESET <= '1';
PORT1 <= "1000000000000000"; PORT1 <= "100000000000000000";
PORT2 <= "0100000000000000"; PORT2 <= "010000000000000000";
BIN1_PHASEINC <= "0100000000000000"; BIN1_PHASEINC <= "0100000000000000";
DIFFBIN_PHASEINC <= "0010000000000000"; DIFFBIN_PHASEINC <= "0010000000000000";
NSAMPLES <= "0000000000000011"; NSAMPLES <= "0000000000011";
wait for 100 ns; wait for 100 ns;
RESET <= '0'; RESET <= '0';
wait for CLK_period*10; wait for CLK_period*10;

15
FPGA/VNA/Test_SPICommands.vhd
View File

@ -48,19 +48,18 @@ ARCHITECTURE behavior OF Test_SPICommands IS
MISO : OUT std_logic; MISO : OUT std_logic;
NSS : IN std_logic; NSS : IN std_logic;
NEW_SAMPLING_DATA : IN std_logic; NEW_SAMPLING_DATA : IN std_logic;
SAMPLING_RESULT : IN std_logic_vector(287 downto 0); SAMPLING_RESULT : IN std_logic_vector(303 downto 0);
SOURCE_UNLOCKED : IN std_logic; SOURCE_UNLOCKED : IN std_logic;
LO_UNLOCKED : IN std_logic; LO_UNLOCKED : IN std_logic;
MAX2871_DEF_4 : OUT std_logic_vector(31 downto 0); MAX2871_DEF_4 : OUT std_logic_vector(31 downto 0);
MAX2871_DEF_3 : OUT std_logic_vector(31 downto 0); MAX2871_DEF_3 : OUT std_logic_vector(31 downto 0);
MAX2871_DEF_1 : OUT std_logic_vector(31 downto 0); MAX2871_DEF_1 : OUT std_logic_vector(31 downto 0);
MAX2871_DEF_0 : OUT std_logic_vector(31 downto 0); MAX2871_DEF_0 : OUT std_logic_vector(31 downto 0);
SWEEP_DATA : OUT std_logic_vector(111 downto 0); SWEEP_DATA : OUT std_logic_vector(95 downto 0);
SWEEP_ADDRESS : OUT std_logic_vector(12 downto 0); SWEEP_ADDRESS : OUT std_logic_vector(12 downto 0);
SWEEP_WRITE : OUT std_logic_vector(0 downto 0); SWEEP_WRITE : OUT std_logic_vector(0 downto 0);
SWEEP_POINTS : OUT std_logic_vector(12 downto 0); SWEEP_POINTS : OUT std_logic_vector(12 downto 0);
NSAMPLES : OUT std_logic_vector(16 downto 0); NSAMPLES : OUT std_logic_vector(12 downto 0);
SETTLING_TIME : OUT std_logic_vector(15 downto 0);
PORT1_EN : OUT std_logic; PORT1_EN : OUT std_logic;
PORT2_EN : OUT std_logic; PORT2_EN : OUT std_logic;
REF_EN : OUT std_logic; REF_EN : OUT std_logic;
@ -80,7 +79,7 @@ ARCHITECTURE behavior OF Test_SPICommands IS
signal MOSI : std_logic := '0'; signal MOSI : std_logic := '0';
signal NSS : std_logic := '0'; signal NSS : std_logic := '0';
signal NEW_SAMPLING_DATA : std_logic := '0'; signal NEW_SAMPLING_DATA : std_logic := '0';
signal SAMPLING_RESULT : std_logic_vector(287 downto 0) := (others => '0'); signal SAMPLING_RESULT : std_logic_vector(303 downto 0) := (others => '0');
signal SOURCE_UNLOCKED : std_logic := '1'; signal SOURCE_UNLOCKED : std_logic := '1';
signal LO_UNLOCKED : std_logic := '1'; signal LO_UNLOCKED : std_logic := '1';
@ -90,12 +89,11 @@ ARCHITECTURE behavior OF Test_SPICommands IS
signal MAX2871_DEF_3 : std_logic_vector(31 downto 0); signal MAX2871_DEF_3 : std_logic_vector(31 downto 0);
signal MAX2871_DEF_1 : std_logic_vector(31 downto 0); signal MAX2871_DEF_1 : std_logic_vector(31 downto 0);
signal MAX2871_DEF_0 : std_logic_vector(31 downto 0); signal MAX2871_DEF_0 : std_logic_vector(31 downto 0);
signal SWEEP_DATA : std_logic_vector(111 downto 0); signal SWEEP_DATA : std_logic_vector(95 downto 0);
signal SWEEP_ADDRESS : std_logic_vector(12 downto 0); signal SWEEP_ADDRESS : std_logic_vector(12 downto 0);
signal SWEEP_WRITE : std_logic_vector(0 downto 0); signal SWEEP_WRITE : std_logic_vector(0 downto 0);
signal SWEEP_POINTS : std_logic_vector(12 downto 0); signal SWEEP_POINTS : std_logic_vector(12 downto 0);
signal NSAMPLES : std_logic_vector(16 downto 0); signal NSAMPLES : std_logic_vector(12 downto 0);
signal SETTLING_TIME : std_logic_vector(15 downto 0);
signal PORT1_EN : std_logic; signal PORT1_EN : std_logic;
signal PORT2_EN : std_logic; signal PORT2_EN : std_logic;
signal REF_EN : std_logic; signal REF_EN : std_logic;
@ -133,7 +131,6 @@ BEGIN
SWEEP_WRITE => SWEEP_WRITE, SWEEP_WRITE => SWEEP_WRITE,
SWEEP_POINTS => SWEEP_POINTS, SWEEP_POINTS => SWEEP_POINTS,
NSAMPLES => NSAMPLES, NSAMPLES => NSAMPLES,
SETTLING_TIME => SETTLING_TIME,
PORT1_EN => PORT1_EN, PORT1_EN => PORT1_EN,
PORT2_EN => PORT2_EN, PORT2_EN => PORT2_EN,
REF_EN => REF_EN, REF_EN => REF_EN,

24
FPGA/VNA/Test_Sampling.vhd
View File

@ -46,13 +46,12 @@ ARCHITECTURE behavior OF Test_Sampling IS
RESET : IN std_logic; RESET : IN std_logic;
ADC_PRESCALER : IN std_logic_vector(7 downto 0); ADC_PRESCALER : IN std_logic_vector(7 downto 0);
PHASEINC : IN std_logic_vector(11 downto 0); PHASEINC : IN std_logic_vector(11 downto 0);
PORT1 : IN std_logic_vector(15 downto 0); PORT1 : IN std_logic_vector(17 downto 0);
PORT2 : IN std_logic_vector(15 downto 0); PORT2 : IN std_logic_vector(17 downto 0);
REF : IN std_logic_vector(15 downto 0); REF : IN std_logic_vector(17 downto 0);
NEW_SAMPLE : IN std_logic; NEW_SAMPLE : IN std_logic;
START : IN std_logic; START : IN std_logic;
SAMPLES : IN std_logic_vector(12 downto 0); SAMPLES : IN std_logic_vector(12 downto 0);
WINDOW_TYPE : IN std_logic_vector(1 downto 0);
ADC_START : OUT std_logic; ADC_START : OUT std_logic;
DONE : OUT std_logic; DONE : OUT std_logic;
PRE_DONE : OUT std_logic; PRE_DONE : OUT std_logic;
@ -70,9 +69,9 @@ ARCHITECTURE behavior OF Test_Sampling IS
--Inputs --Inputs
signal CLK : std_logic := '0'; signal CLK : std_logic := '0';
signal RESET : std_logic := '0'; signal RESET : std_logic := '0';
signal PORT1 : std_logic_vector(15 downto 0) := (others => '0'); signal PORT1 : std_logic_vector(17 downto 0) := (others => '0');
signal PORT2 : std_logic_vector(15 downto 0) := (others => '0'); signal PORT2 : std_logic_vector(17 downto 0) := (others => '0');
signal REF : std_logic_vector(15 downto 0) := (others => '0'); signal REF : std_logic_vector(17 downto 0) := (others => '0');
signal NEW_SAMPLE : std_logic := '0'; signal NEW_SAMPLE : std_logic := '0';
signal START : std_logic := '0'; signal START : std_logic := '0';
signal SAMPLES : std_logic_vector(12 downto 0) := (others => '0'); signal SAMPLES : std_logic_vector(12 downto 0) := (others => '0');
@ -108,7 +107,6 @@ BEGIN
NEW_SAMPLE => NEW_SAMPLE, NEW_SAMPLE => NEW_SAMPLE,
START => START, START => START,
SAMPLES => SAMPLES, SAMPLES => SAMPLES,
WINDOW_TYPE => "00",
ADC_START => ADC_START, ADC_START => ADC_START,
DONE => DONE, DONE => DONE,
PRE_DONE => PRE_DONE, PRE_DONE => PRE_DONE,
@ -117,7 +115,7 @@ BEGIN
PORT2_I => PORT2_I, PORT2_I => PORT2_I,
PORT2_Q => PORT2_Q, PORT2_Q => PORT2_Q,
REF_I => REF_I, REF_I => REF_I,
REF_Q => REF_I, REF_Q => REF_Q,
ACTIVE => open ACTIVE => open
); );
@ -141,11 +139,11 @@ BEGIN
wait for CLK_period*10; wait for CLK_period*10;
-- insert stimulus here -- insert stimulus here
ADC_PRESCALER <= "01110000"; ADC_PRESCALER <= "011110000";
PHASEINC <= "010001100000"; PHASEINC <= "010001100000";
PORT1 <= "0111111111111111"; PORT1 <= "000001111111111111";
PORT2 <= "0111111111111111"; PORT2 <= "000011111111111111";
REF <= "0111111111111111"; REF <= "000111111111111111";
SAMPLES <= "0000000000001"; SAMPLES <= "0000000000001";
START <= '1'; START <= '1';
while True loop while True loop

117
FPGA/VNA/Test_Sync.vhd
View File

@ -1,117 +0,0 @@
--------------------------------------------------------------------------------
-- Company:
-- Engineer:
--
-- Create Date: 14:55:06 05/10/2020
-- Design Name:
-- Module Name: /home/jan/Projekte/VNA/FPGA/VNA/Test_Sync.vhd
-- Project Name: VNA
-- Target Device:
-- Tool versions:
-- Description:
--
-- VHDL Test Bench Created by ISE for module: SwitchingSync
--
-- Dependencies:
--
-- Revision:
-- Revision 0.01 - File Created
-- Additional Comments:
--
-- Notes:
-- This testbench has been automatically generated using types std_logic and
-- std_logic_vector for the ports of the unit under test. Xilinx recommends
-- that these types always be used for the top-level I/O of a design in order
-- to guarantee that the testbench will bind correctly to the post-implementation
-- simulation model.
--------------------------------------------------------------------------------
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
-- Uncomment the following library declaration if using
-- arithmetic functions with Signed or Unsigned values
--USE ieee.numeric_std.ALL;
ENTITY Test_Sync IS
END Test_Sync;
ARCHITECTURE behavior OF Test_Sync IS
-- Component Declaration for the Unit Under Test (UUT)
COMPONENT SwitchingSync
Generic (CLK_DIV : integer);
PORT(
CLK : IN std_logic;
RESET : IN std_logic;
SETTING : IN std_logic_vector(1 downto 0);
SYNC_OUT : OUT std_logic;
SYNC_PULSE_IN : IN std_logic
);
END COMPONENT;
--Inputs
signal CLK : std_logic := '0';
signal RESET : std_logic := '0';
signal SETTING : std_logic_vector(1 downto 0) := (others => '0');
signal SYNC_PULSE_IN : std_logic := '0';
--Outputs
signal SYNC_OUT : std_logic;
-- Clock period definitions
constant CLK_period : time := 6.25 ns;
constant SYNC_PULSE_period : time := 1031.25 ns;
BEGIN
-- Instantiate the Unit Under Test (UUT)
uut: SwitchingSync
GENERIC MAP (CLK_DIV => 160)
PORT MAP (
CLK => CLK,
RESET => RESET,
SETTING => SETTING,
SYNC_OUT => SYNC_OUT,
SYNC_PULSE_IN => SYNC_PULSE_IN
);
-- Clock process definitions
CLK_process :process
begin
CLK <= '0';
wait for CLK_period/2;
CLK <= '1';
wait for CLK_period/2;
end process;
SYNC_process :process
begin
SYNC_PULSE_IN <= '1';
wait for CLK_period;
SYNC_PULSE_IN <= '0';
wait for SYNC_PULSE_period - CLK_period;
end process;
-- Stimulus process
stim_proc: process
begin
-- hold reset state for 100 ns.
RESET <= '1';
wait for 100 ns;
RESET <= '0';
wait for CLK_period*10;
-- insert stimulus here
SETTING <= "00";
wait for CLK_period*1600;
SETTING <= "01";
wait for CLK_period*1600;
SETTING <= "10";
wait for CLK_period*1600;
wait;
end process;
END;

10
FPGA/VNA/Test_Window.vhd
View File

@ -43,7 +43,7 @@ ARCHITECTURE behavior OF Test_Window IS
PORT( PORT(
CLK : IN std_logic; CLK : IN std_logic;
INDEX : IN std_logic_vector(6 downto 0); INDEX : IN std_logic_vector(6 downto 0);
WINDOW : IN std_logic_vector(1 downto 0); WINDOW_TYPE : IN std_logic_vector(1 downto 0);
VALUE : OUT std_logic_vector(15 downto 0) VALUE : OUT std_logic_vector(15 downto 0)
); );
END COMPONENT; END COMPONENT;
@ -52,7 +52,7 @@ ARCHITECTURE behavior OF Test_Window IS
--Inputs --Inputs
signal CLK : std_logic := '0'; signal CLK : std_logic := '0';
signal INDEX : std_logic_vector(6 downto 0) := (others => '0'); signal INDEX : std_logic_vector(6 downto 0) := (others => '0');
signal WINDOW2 : std_logic_vector(1 downto 0) := (others => '0'); signal WINDOW_TYPE : std_logic_vector(1 downto 0) := (others => '0');
--Outputs --Outputs
signal VALUE : std_logic_vector(15 downto 0); signal VALUE : std_logic_vector(15 downto 0);
@ -66,7 +66,7 @@ BEGIN
uut: window PORT MAP ( uut: window PORT MAP (
CLK => CLK, CLK => CLK,
INDEX => INDEX, INDEX => INDEX,
WINDOW => WINDOW2, WINDOW_TYPE => WINDOW_TYPE,
VALUE => VALUE VALUE => VALUE
); );
@ -85,11 +85,11 @@ BEGIN
begin begin
-- hold reset state for 100 ns. -- hold reset state for 100 ns.
wait for 100 ns; wait for 100 ns;
WINDOW2 <= "00"; WINDOW_TYPE <= "00";
INDEX <= "0000000"; INDEX <= "0000000";
wait for CLK_period*10; wait for CLK_period*10;
WINDOW2 <= "10"; WINDOW_TYPE <= "10";
-- insert stimulus here -- insert stimulus here
wait for CLK_period*10; wait for CLK_period*10;
INDEX <= "0000001"; INDEX <= "0000001";

12
FPGA/VNA/Test_Windowing.vhd
View File

@ -48,9 +48,9 @@ ARCHITECTURE behavior OF Test_Windowing IS
PORT2_RAW : IN std_logic_vector(15 downto 0); PORT2_RAW : IN std_logic_vector(15 downto 0);
REF_RAW : IN std_logic_vector(15 downto 0); REF_RAW : IN std_logic_vector(15 downto 0);
ADC_READY : IN std_logic; ADC_READY : IN std_logic;
PORT1_WINDOWED : OUT std_logic_vector(15 downto 0); PORT1_WINDOWED : OUT std_logic_vector(17 downto 0);
PORT2_WINDOWED : OUT std_logic_vector(15 downto 0); PORT2_WINDOWED : OUT std_logic_vector(17 downto 0);
REF_WINDOWED : OUT std_logic_vector(15 downto 0); REF_WINDOWED : OUT std_logic_vector(17 downto 0);
WINDOWING_DONE : OUT std_logic; WINDOWING_DONE : OUT std_logic;
NSAMPLES : IN std_logic_vector(12 downto 0) NSAMPLES : IN std_logic_vector(12 downto 0)
); );
@ -68,9 +68,9 @@ ARCHITECTURE behavior OF Test_Windowing IS
signal NSAMPLES : std_logic_vector(12 downto 0) := (others => '0'); signal NSAMPLES : std_logic_vector(12 downto 0) := (others => '0');
--Outputs --Outputs
signal PORT1_WINDOWED : std_logic_vector(15 downto 0); signal PORT1_WINDOWED : std_logic_vector(17 downto 0);
signal PORT2_WINDOWED : std_logic_vector(15 downto 0); signal PORT2_WINDOWED : std_logic_vector(17 downto 0);
signal REF_WINDOWED : std_logic_vector(15 downto 0); signal REF_WINDOWED : std_logic_vector(17 downto 0);
signal WINDOWING_DONE : std_logic; signal WINDOWING_DONE : std_logic;
-- Clock period definitions -- Clock period definitions

104
FPGA/VNA/VNA.gise
View File

@ -47,11 +47,11 @@
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_SPI_isim_beh.exe"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_SPI_isim_beh.exe"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_Sampling_isim_beh.exe"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_Sampling_isim_beh.exe"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_SinCos_isim_beh.exe"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_SinCos_isim_beh.exe"/>
<file xil_pn:fileType="FILE_XST_PROJECT" xil_pn:name="Test_Sync_beh.prj"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_Sync_isim_beh.exe"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_Sync_isim_beh.exe"/>
<file xil_pn:fileType="FILE_ISIM_MISC" xil_pn:name="Test_Sync_isim_beh.wdb"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_Window_isim_beh.exe"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_Window_isim_beh.exe"/>
<file xil_pn:fileType="FILE_XST_PROJECT" xil_pn:name="Test_Windowing_beh.prj"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_Windowing_isim_beh.exe"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_Windowing_isim_beh.exe"/>
<file xil_pn:fileType="FILE_ISIM_MISC" xil_pn:name="Test_Windowing_isim_beh.wdb"/>
<file xil_pn:fileType="FILE_XST_PROJECT" xil_pn:name="Test_Windowing_stx_beh.prj"/> <file xil_pn:fileType="FILE_XST_PROJECT" xil_pn:name="Test_Windowing_stx_beh.prj"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_top_isim_beh.exe"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="Test_top_isim_beh.exe"/>
<file xil_pn:fileType="FILE_VHDL_INSTTEMPLATE" xil_pn:name="Windowing.vhi"/> <file xil_pn:fileType="FILE_VHDL_INSTTEMPLATE" xil_pn:name="Windowing.vhi"/>
@ -71,6 +71,7 @@
<file xil_pn:fileType="FILE_CMD" xil_pn:name="ise_impact.cmd"/> <file xil_pn:fileType="FILE_CMD" xil_pn:name="ise_impact.cmd"/>
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="isim"/> <file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="isim"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_CMD" xil_pn:name="isim.cmd"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_CMD" xil_pn:name="isim.cmd"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_LOG" xil_pn:name="isim.log"/>
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="planAhead_run_1"/> <file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="planAhead_run_1"/>
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="planAhead_run_2"/> <file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="planAhead_run_2"/>
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="planAhead_run_3"/> <file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="planAhead_run_3"/>
@ -121,6 +122,9 @@
<file xil_pn:fileType="FILE_LOG" xil_pn:name="webtalk.log"/> <file xil_pn:fileType="FILE_LOG" xil_pn:name="webtalk.log"/>
<file xil_pn:fileType="FILE_FITTER_REPORT" xil_pn:name="webtalk_pn.xml"/> <file xil_pn:fileType="FILE_FITTER_REPORT" xil_pn:name="webtalk_pn.xml"/>
<file xil_pn:fileType="FILE_VHDL_INSTTEMPLATE" xil_pn:name="window.vhi"/> <file xil_pn:fileType="FILE_VHDL_INSTTEMPLATE" xil_pn:name="window.vhi"/>
<file xil_pn:fileType="FILE_XST_PROJECT" xil_pn:name="window_beh.prj"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_ISIM_EXE" xil_pn:name="window_isim_beh.exe"/>
<file xil_pn:fileType="FILE_ISIM_MISC" xil_pn:name="window_isim_beh.wdb"/>
<file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_INI" xil_pn:name="xilinxsim.ini"/> <file xil_pn:branch="BehavioralSim" xil_pn:fileType="FILE_INI" xil_pn:name="xilinxsim.ini"/>
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="xlnx_auto_0_xdb"/> <file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="xlnx_auto_0_xdb"/>
<file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="xst"/> <file xil_pn:fileType="FILE_DIRECTORY" xil_pn:name="xst"/>
@ -131,7 +135,7 @@
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
</transform> </transform>
<transform xil_pn:end_ts="1604688338" xil_pn:in_ck="7920041737510621142" xil_pn:name="TRAN_copyAbstractToPostAbstractSimulation" xil_pn:start_ts="1604688338"> <transform xil_pn:end_ts="1604764195" xil_pn:in_ck="-3235419683908193302" xil_pn:name="TRAN_copyAbstractToPostAbstractSimulation" xil_pn:start_ts="1604764195">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<status xil_pn:value="OutOfDateForInputs"/> <status xil_pn:value="OutOfDateForInputs"/>
@ -154,7 +158,6 @@
<outfile xil_pn:name="Test_SPICommands.vhd"/> <outfile xil_pn:name="Test_SPICommands.vhd"/>
<outfile xil_pn:name="Test_Sampling.vhd"/> <outfile xil_pn:name="Test_Sampling.vhd"/>
<outfile xil_pn:name="Test_SinCos.vhd"/> <outfile xil_pn:name="Test_SinCos.vhd"/>
<outfile xil_pn:name="Test_Sync.vhd"/>
<outfile xil_pn:name="Test_Window.vhd"/> <outfile xil_pn:name="Test_Window.vhd"/>
<outfile xil_pn:name="Test_Windowing.vhd"/> <outfile xil_pn:name="Test_Windowing.vhd"/>
<outfile xil_pn:name="Windowing.vhd"/> <outfile xil_pn:name="Windowing.vhd"/>
@ -162,89 +165,56 @@
<outfile xil_pn:name="top.vhd"/> <outfile xil_pn:name="top.vhd"/>
<outfile xil_pn:name="window.vhd"/> <outfile xil_pn:name="window.vhd"/>
</transform> </transform>
<transform xil_pn:end_ts="1604684486" xil_pn:name="TRAN_xawsToSimhdl" xil_pn:prop_ck="1671761620692912459" xil_pn:start_ts="1604684486"> <transform xil_pn:end_ts="1604764128" xil_pn:name="TRAN_xawsToSimhdl" xil_pn:prop_ck="3044368668303368987" xil_pn:start_ts="1604764128">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
</transform> </transform>
<transform xil_pn:end_ts="1604684486" xil_pn:name="TRAN_schematicsToHdlSim" xil_pn:prop_ck="6847665263640105929" xil_pn:start_ts="1604684486"> <transform xil_pn:end_ts="1604764128" xil_pn:name="TRAN_schematicsToHdlSim" xil_pn:prop_ck="-7898843873652552295" xil_pn:start_ts="1604764128">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
</transform> </transform>
<transform xil_pn:end_ts="1604671666" xil_pn:in_ck="6306144844996157057" xil_pn:name="TRAN_regenerateCoresSim" xil_pn:prop_ck="-2723611991789822717" xil_pn:start_ts="1604671665"> <transform xil_pn:end_ts="1604763670" xil_pn:in_ck="6306144844996157057" xil_pn:name="TRAN_regenerateCoresSim" xil_pn:prop_ck="-2723611991789822717" xil_pn:start_ts="1604763670">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<outfile xil_pn:name="ipcore_dir/DSP_SLICE.ngc"/> <status xil_pn:value="OutOfDateForInputs"/>
<outfile xil_pn:name="ipcore_dir/DSP_SLICE.vhd"/> <status xil_pn:value="OutOfDateForOutputs"/>
<outfile xil_pn:name="ipcore_dir/PLL.vhd"/> <status xil_pn:value="InputChanged"/>
<outfile xil_pn:name="ipcore_dir/SinCos.ngc"/> <status xil_pn:value="InputRemoved"/>
<outfile xil_pn:name="ipcore_dir/SinCos.vhd"/> <status xil_pn:value="OutputRemoved"/>
<outfile xil_pn:name="ipcore_dir/SinCosMult.ngc"/>
<outfile xil_pn:name="ipcore_dir/SinCosMult.vhd"/>
<outfile xil_pn:name="ipcore_dir/SweepConfigMem.ngc"/>
<outfile xil_pn:name="ipcore_dir/SweepConfigMem.vhd"/>
<outfile xil_pn:name="ipcore_dir/result_bram.ngc"/>
<outfile xil_pn:name="ipcore_dir/result_bram.vhd"/>
</transform> </transform>
<transform xil_pn:end_ts="1604684548" xil_pn:in_ck="2301248572745587975" xil_pn:name="TRAN_copyPostAbstractToPreSimulation" xil_pn:start_ts="1604684548"> <transform xil_pn:end_ts="1604764195" xil_pn:in_ck="-9185925483828391381" xil_pn:name="TRAN_copyPostAbstractToPreSimulation" xil_pn:start_ts="1604764195">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<status xil_pn:value="OutOfDateForInputs"/> <status xil_pn:value="OutOfDateForInputs"/>
<status xil_pn:value="OutOfDateForPredecessor"/> <status xil_pn:value="OutOfDateForPredecessor"/>
<status xil_pn:value="OutOfDateForOutputs"/> <status xil_pn:value="OutOfDateForOutputs"/>
<status xil_pn:value="InputChanged"/> <status xil_pn:value="InputChanged"/>
<status xil_pn:value="OutputChanged"/> <status xil_pn:value="InputRemoved"/>
<outfile xil_pn:name="DFT.vhd"/> <status xil_pn:value="OutputRemoved"/>
<outfile xil_pn:name="MAX2871.vhd"/>
<outfile xil_pn:name="MCP33131.vhd"/>
<outfile xil_pn:name="ResetDelay.vhd"/>
<outfile xil_pn:name="SPIConfig.vhd"/>
<outfile xil_pn:name="Sampling.vhd"/>
<outfile xil_pn:name="Sweep.vhd"/>
<outfile xil_pn:name="Synchronizer.vhd"/>
<outfile xil_pn:name="Test_DFT.vhd"/>
<outfile xil_pn:name="Test_MAX2871.vhd"/>
<outfile xil_pn:name="Test_MCP33131.vhd"/>
<outfile xil_pn:name="Test_PLL.vhd"/>
<outfile xil_pn:name="Test_SPI.vhd"/>
<outfile xil_pn:name="Test_SPICommands.vhd"/>
<outfile xil_pn:name="Test_Sampling.vhd"/>
<outfile xil_pn:name="Test_SinCos.vhd"/>
<outfile xil_pn:name="Test_Sync.vhd"/>
<outfile xil_pn:name="Test_Window.vhd"/>
<outfile xil_pn:name="Test_Windowing.vhd"/>
<outfile xil_pn:name="Windowing.vhd"/>
<outfile xil_pn:name="ipcore_dir/DSP_SLICE.vhd"/>
<outfile xil_pn:name="ipcore_dir/PLL.vhd"/>
<outfile xil_pn:name="ipcore_dir/SinCos.vhd"/>
<outfile xil_pn:name="ipcore_dir/SinCosMult.vhd"/>
<outfile xil_pn:name="ipcore_dir/SweepConfigMem.vhd"/>
<outfile xil_pn:name="ipcore_dir/result_bram.vhd"/>
<outfile xil_pn:name="spi_slave.vhd"/>
<outfile xil_pn:name="top.vhd"/>
<outfile xil_pn:name="window.vhd"/>
</transform> </transform>
<transform xil_pn:end_ts="1604684552" xil_pn:in_ck="2301248572745587975" xil_pn:name="TRAN_ISimulateBehavioralModelRunFuse" xil_pn:prop_ck="7968903525862259638" xil_pn:start_ts="1604684548"> <transform xil_pn:end_ts="1604764196" xil_pn:in_ck="4954137158046299803" xil_pn:name="TRAN_ISimulateBehavioralModelRunFuse" xil_pn:prop_ck="3520630626282717961" xil_pn:start_ts="1604764195">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<status xil_pn:value="OutOfDateForInputs"/> <status xil_pn:value="OutOfDateForInputs"/>
<status xil_pn:value="OutOfDateForProperties"/>
<status xil_pn:value="OutOfDateForPredecessor"/> <status xil_pn:value="OutOfDateForPredecessor"/>
<status xil_pn:value="OutOfDateForOutputs"/> <status xil_pn:value="OutOfDateForOutputs"/>
<status xil_pn:value="InputAdded"/>
<status xil_pn:value="InputChanged"/> <status xil_pn:value="InputChanged"/>
<status xil_pn:value="InputRemoved"/>
<status xil_pn:value="OutputChanged"/> <status xil_pn:value="OutputChanged"/>
<outfile xil_pn:name="Test_Windowing_beh.prj"/> <status xil_pn:value="OutputRemoved"/>
<outfile xil_pn:name="Test_Windowing_isim_beh.exe"/>
<outfile xil_pn:name="fuse.log"/>
<outfile xil_pn:name="isim"/>
<outfile xil_pn:name="xilinxsim.ini"/>
</transform> </transform>
<transform xil_pn:end_ts="1604684553" xil_pn:in_ck="-2626831050236864990" xil_pn:name="TRAN_ISimulateBehavioralModel" xil_pn:prop_ck="-4828419273139430045" xil_pn:start_ts="1604684552"> <transform xil_pn:end_ts="1604764196" xil_pn:in_ck="-6978407093755538946" xil_pn:name="TRAN_ISimulateBehavioralModel" xil_pn:prop_ck="-8357625476205656394" xil_pn:start_ts="1604764196">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<status xil_pn:value="OutOfDateForInputs"/>
<status xil_pn:value="OutOfDateForProperties"/>
<status xil_pn:value="OutOfDateForPredecessor"/> <status xil_pn:value="OutOfDateForPredecessor"/>
<status xil_pn:value="OutOfDateForOutputs"/> <status xil_pn:value="OutOfDateForOutputs"/>
<status xil_pn:value="InputRemoved"/>
<status xil_pn:value="OutputChanged"/> <status xil_pn:value="OutputChanged"/>
<outfile xil_pn:name="Test_Windowing_isim_beh.wdb"/> <status xil_pn:value="OutputRemoved"/>
<outfile xil_pn:name="isim.cmd"/>
</transform> </transform>
<transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1600270761"> <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1600270761">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
@ -254,7 +224,7 @@
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
</transform> </transform>
<transform xil_pn:end_ts="1604675434" xil_pn:in_ck="6306144844996157057" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="-2723611991789822717" xil_pn:start_ts="1604675434"> <transform xil_pn:end_ts="1604764706" xil_pn:in_ck="-4366097307991745463" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="-2723611991789822717" xil_pn:start_ts="1604764706">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<outfile xil_pn:name="ipcore_dir/DSP_SLICE.ngc"/> <outfile xil_pn:name="ipcore_dir/DSP_SLICE.ngc"/>
@ -262,8 +232,6 @@
<outfile xil_pn:name="ipcore_dir/PLL.vhd"/> <outfile xil_pn:name="ipcore_dir/PLL.vhd"/>
<outfile xil_pn:name="ipcore_dir/SinCos.ngc"/> <outfile xil_pn:name="ipcore_dir/SinCos.ngc"/>
<outfile xil_pn:name="ipcore_dir/SinCos.vhd"/> <outfile xil_pn:name="ipcore_dir/SinCos.vhd"/>
<outfile xil_pn:name="ipcore_dir/SinCosMult.ngc"/>
<outfile xil_pn:name="ipcore_dir/SinCosMult.vhd"/>
<outfile xil_pn:name="ipcore_dir/SweepConfigMem.ngc"/> <outfile xil_pn:name="ipcore_dir/SweepConfigMem.ngc"/>
<outfile xil_pn:name="ipcore_dir/SweepConfigMem.vhd"/> <outfile xil_pn:name="ipcore_dir/SweepConfigMem.vhd"/>
<outfile xil_pn:name="ipcore_dir/result_bram.ngc"/> <outfile xil_pn:name="ipcore_dir/result_bram.ngc"/>
@ -285,7 +253,7 @@
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
</transform> </transform>
<transform xil_pn:end_ts="1604704764" xil_pn:in_ck="-480514955089580632" xil_pn:name="TRANEXT_xstsynthesize_spartan6" xil_pn:prop_ck="3256065936432453276" xil_pn:start_ts="1604704739"> <transform xil_pn:end_ts="1604764767" xil_pn:in_ck="2241500006820465658" xil_pn:name="TRANEXT_xstsynthesize_spartan6" xil_pn:prop_ck="3256065936432453276" xil_pn:start_ts="1604764742">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="WarningsGenerated"/> <status xil_pn:value="WarningsGenerated"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
@ -307,7 +275,7 @@
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
</transform> </transform>
<transform xil_pn:end_ts="1604704771" xil_pn:in_ck="-614491687805493712" xil_pn:name="TRANEXT_ngdbuild_FPGA" xil_pn:prop_ck="4604875190571501774" xil_pn:start_ts="1604704764"> <transform xil_pn:end_ts="1604764774" xil_pn:in_ck="5411862124762956458" xil_pn:name="TRANEXT_ngdbuild_FPGA" xil_pn:prop_ck="4604875190571501774" xil_pn:start_ts="1604764767">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<outfile xil_pn:name="_ngo"/> <outfile xil_pn:name="_ngo"/>
@ -316,10 +284,12 @@
<outfile xil_pn:name="top.ngd"/> <outfile xil_pn:name="top.ngd"/>
<outfile xil_pn:name="top_ngdbuild.xrpt"/> <outfile xil_pn:name="top_ngdbuild.xrpt"/>
</transform> </transform>
<transform xil_pn:end_ts="1604704833" xil_pn:in_ck="8512332261572065657" xil_pn:name="TRANEXT_map_spartan6" xil_pn:prop_ck="-4668962392366239264" xil_pn:start_ts="1604704771"> <transform xil_pn:end_ts="1604764932" xil_pn:in_ck="8512332261572065657" xil_pn:name="TRANEXT_map_spartan6" xil_pn:prop_ck="-4668962392366239264" xil_pn:start_ts="1604764774">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="WarningsGenerated"/> <status xil_pn:value="WarningsGenerated"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<status xil_pn:value="OutOfDateForOutputs"/>
<status xil_pn:value="OutputChanged"/>
<outfile xil_pn:name="_xmsgs/map.xmsgs"/> <outfile xil_pn:name="_xmsgs/map.xmsgs"/>
<outfile xil_pn:name="top.pcf"/> <outfile xil_pn:name="top.pcf"/>
<outfile xil_pn:name="top_map.map"/> <outfile xil_pn:name="top_map.map"/>
@ -330,7 +300,7 @@
<outfile xil_pn:name="top_summary.xml"/> <outfile xil_pn:name="top_summary.xml"/>
<outfile xil_pn:name="top_usage.xml"/> <outfile xil_pn:name="top_usage.xml"/>
</transform> </transform>
<transform xil_pn:end_ts="1604704864" xil_pn:in_ck="1117507038335044978" xil_pn:name="TRANEXT_par_spartan6" xil_pn:prop_ck="-1085068593928086116" xil_pn:start_ts="1604704833"> <transform xil_pn:end_ts="1604764964" xil_pn:in_ck="1117507038335044978" xil_pn:name="TRANEXT_par_spartan6" xil_pn:prop_ck="-1085068593928086116" xil_pn:start_ts="1604764932">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<outfile xil_pn:name="_xmsgs/par.xmsgs"/> <outfile xil_pn:name="_xmsgs/par.xmsgs"/>
@ -344,7 +314,7 @@
<outfile xil_pn:name="top_pad.txt"/> <outfile xil_pn:name="top_pad.txt"/>
<outfile xil_pn:name="top_par.xrpt"/> <outfile xil_pn:name="top_par.xrpt"/>
</transform> </transform>
<transform xil_pn:end_ts="1604704879" xil_pn:in_ck="154288912438" xil_pn:name="TRANEXT_bitFile_spartan6" xil_pn:prop_ck="3274353840855015246" xil_pn:start_ts="1604704864"> <transform xil_pn:end_ts="1604764980" xil_pn:in_ck="154288912438" xil_pn:name="TRANEXT_bitFile_spartan6" xil_pn:prop_ck="3274353840855015246" xil_pn:start_ts="1604764964">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="WarningsGenerated"/> <status xil_pn:value="WarningsGenerated"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
@ -398,7 +368,7 @@
<status xil_pn:value="InputChanged"/> <status xil_pn:value="InputChanged"/>
<status xil_pn:value="InputRemoved"/> <status xil_pn:value="InputRemoved"/>
</transform> </transform>
<transform xil_pn:end_ts="1604704864" xil_pn:in_ck="8512326635937592693" xil_pn:name="TRAN_postRouteTrce" xil_pn:prop_ck="445577401284416184" xil_pn:start_ts="1604704856"> <transform xil_pn:end_ts="1604764964" xil_pn:in_ck="8512326635937592693" xil_pn:name="TRAN_postRouteTrce" xil_pn:prop_ck="445577401284416184" xil_pn:start_ts="1604764957">
<status xil_pn:value="SuccessfullyRun"/> <status xil_pn:value="SuccessfullyRun"/>
<status xil_pn:value="ReadyToRun"/> <status xil_pn:value="ReadyToRun"/>
<outfile xil_pn:name="_xmsgs/trce.xmsgs"/> <outfile xil_pn:name="_xmsgs/trce.xmsgs"/>

61
FPGA/VNA/VNA.xise
View File

@ -17,14 +17,14 @@
<files> <files>
<file xil_pn:name="top.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="top.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="18"/> <association xil_pn:name="Implementation" xil_pn:seqID="17"/>
</file> </file>
<file xil_pn:name="top.ucf" xil_pn:type="FILE_UCF"> <file xil_pn:name="top.ucf" xil_pn:type="FILE_UCF">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/> <association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file> </file>
<file xil_pn:name="MCP33131.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="MCP33131.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="13"/> <association xil_pn:name="Implementation" xil_pn:seqID="12"/>
</file> </file>
<file xil_pn:name="Test_MCP33131.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Test_MCP33131.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
@ -34,21 +34,17 @@
</file> </file>
<file xil_pn:name="MAX2871.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="MAX2871.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="14"/> <association xil_pn:name="Implementation" xil_pn:seqID="13"/>
</file> </file>
<file xil_pn:name="ipcore_dir/SweepConfigMem.xco" xil_pn:type="FILE_COREGEN"> <file xil_pn:name="ipcore_dir/SweepConfigMem.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="15"/> <association xil_pn:name="Implementation" xil_pn:seqID="14"/>
</file> </file>
<file xil_pn:name="Sampling.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Sampling.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="11"/> <association xil_pn:name="Implementation" xil_pn:seqID="10"/>
</file> </file>
<file xil_pn:name="ipcore_dir/SinCos.xco" xil_pn:type="FILE_COREGEN"> <file xil_pn:name="ipcore_dir/SinCos.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="4"/>
</file>
<file xil_pn:name="ipcore_dir/SinCosMult.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/> <association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file> </file>
@ -64,15 +60,15 @@
</file> </file>
<file xil_pn:name="SPIConfig.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="SPIConfig.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="10"/> <association xil_pn:name="Implementation" xil_pn:seqID="9"/>
</file> </file>
<file xil_pn:name="Sweep.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Sweep.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="9"/> <association xil_pn:name="Implementation" xil_pn:seqID="8"/>
</file> </file>
<file xil_pn:name="ipcore_dir/PLL.xco" xil_pn:type="FILE_COREGEN"> <file xil_pn:name="ipcore_dir/PLL.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="16"/> <association xil_pn:name="Implementation" xil_pn:seqID="15"/>
</file> </file>
<file xil_pn:name="Test_MAX2871.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Test_MAX2871.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
@ -92,19 +88,15 @@
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="124"/> <association xil_pn:name="PostRouteSimulation" xil_pn:seqID="124"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="124"/> <association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="124"/>
</file> </file>
<file xil_pn:name="Test_Sync.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="124"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="124"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="124"/>
</file>
<file xil_pn:name="ResetDelay.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="ResetDelay.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="12"/> <association xil_pn:name="Implementation" xil_pn:seqID="11"/>
</file> </file>
<file xil_pn:name="Test_SinCos.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Test_SinCos.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/> <association xil_pn:name="PostMapSimulation" xil_pn:seqID="20"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="20"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="20"/>
</file> </file>
<file xil_pn:name="Test_SPI.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Test_SPI.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
@ -114,7 +106,7 @@
</file> </file>
<file xil_pn:name="Synchronizer.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Synchronizer.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="8"/> <association xil_pn:name="Implementation" xil_pn:seqID="7"/>
</file> </file>
<file xil_pn:name="window.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="window.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="1"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="1"/>
@ -128,7 +120,7 @@
</file> </file>
<file xil_pn:name="DFT.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="DFT.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="17"/> <association xil_pn:name="Implementation" xil_pn:seqID="16"/>
</file> </file>
<file xil_pn:name="Test_DFT.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Test_DFT.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
@ -138,18 +130,18 @@
</file> </file>
<file xil_pn:name="ipcore_dir/result_bram.xco" xil_pn:type="FILE_COREGEN"> <file xil_pn:name="ipcore_dir/result_bram.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="5"/> <association xil_pn:name="Implementation" xil_pn:seqID="4"/>
</file> </file>
<file xil_pn:name="ipcore_dir/DSP_SLICE.xco" xil_pn:type="FILE_COREGEN"> <file xil_pn:name="ipcore_dir/DSP_SLICE.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="6"/> <association xil_pn:name="Implementation" xil_pn:seqID="5"/>
</file> </file>
<file xil_pn:name="Windowing.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Windowing.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="7"/> <association xil_pn:name="Implementation" xil_pn:seqID="6"/>
</file> </file>
<file xil_pn:name="Test_Windowing.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="Test_Windowing.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="4"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="176"/> <association xil_pn:name="PostMapSimulation" xil_pn:seqID="176"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="176"/> <association xil_pn:name="PostRouteSimulation" xil_pn:seqID="176"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="176"/> <association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="176"/>
@ -160,9 +152,6 @@
<file xil_pn:name="ipcore_dir/SinCos.xise" xil_pn:type="FILE_COREGENISE"> <file xil_pn:name="ipcore_dir/SinCos.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/> <association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file> </file>
<file xil_pn:name="ipcore_dir/SinCosMult.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="ipcore_dir/PLL.xise" xil_pn:type="FILE_COREGENISE"> <file xil_pn:name="ipcore_dir/PLL.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/> <association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file> </file>
@ -358,7 +347,7 @@
<property xil_pn:name="Overwrite Compiled Libraries" xil_pn:value="false" xil_pn:valueState="default"/> <property xil_pn:name="Overwrite Compiled Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers into IOBs" xil_pn:value="Auto" xil_pn:valueState="default"/> <property xil_pn:name="Pack I/O Registers into IOBs" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers/Latches into IOBs" xil_pn:value="Off" xil_pn:valueState="default"/> <property xil_pn:name="Pack I/O Registers/Latches into IOBs" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Package" xil_pn:value="tqg144" xil_pn:valueState="non-default"/> <property xil_pn:name="Package" xil_pn:value="tqg144" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis" xil_pn:value="false" xil_pn:valueState="default"/> <property xil_pn:name="Perform Advanced Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis Post Trace" xil_pn:value="false" xil_pn:valueState="default"/> <property xil_pn:name="Perform Advanced Analysis Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Timing-Driven Packing and Placement" xil_pn:value="false" xil_pn:valueState="default"/> <property xil_pn:name="Perform Timing-Driven Packing and Placement" xil_pn:value="false" xil_pn:valueState="default"/>
@ -416,8 +405,8 @@
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/> <property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/> <property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/> <property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Module Instance Name" xil_pn:value="/Test_Windowing" xil_pn:valueState="non-default"/> <property xil_pn:name="Selected Module Instance Name" xil_pn:value="/Test_DFT" xil_pn:valueState="non-default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="work.Test_Windowing" xil_pn:valueState="non-default"/> <property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="work.Test_DFT" xil_pn:valueState="non-default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/> <property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/> <property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/> <property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
@ -435,7 +424,7 @@
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/> <property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/> <property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/> <property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="work.Test_Windowing" xil_pn:valueState="default"/> <property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="work.Test_DFT" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/> <property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/> <property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/> <property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
@ -487,7 +476,7 @@
<!-- --> <!-- -->
<!-- The following properties are for internal use only. These should not be modified.--> <!-- The following properties are for internal use only. These should not be modified.-->
<!-- --> <!-- -->
<property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="Architecture|Test_Windowing|behavior" xil_pn:valueState="non-default"/> <property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="Architecture|window|Behavioral" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DesignName" xil_pn:value="VNA" xil_pn:valueState="non-default"/> <property xil_pn:name="PROP_DesignName" xil_pn:value="VNA" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/> <property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/> <property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/>

12
FPGA/VNA/Windowing.vhd
View File

@ -37,9 +37,9 @@ entity Windowing is
PORT2_RAW : in STD_LOGIC_VECTOR (15 downto 0); PORT2_RAW : in STD_LOGIC_VECTOR (15 downto 0);
REF_RAW : in STD_LOGIC_VECTOR (15 downto 0); REF_RAW : in STD_LOGIC_VECTOR (15 downto 0);
ADC_READY : in STD_LOGIC; ADC_READY : in STD_LOGIC;
PORT1_WINDOWED : out STD_LOGIC_VECTOR (15 downto 0); PORT1_WINDOWED : out STD_LOGIC_VECTOR (17 downto 0);
PORT2_WINDOWED : out STD_LOGIC_VECTOR (15 downto 0); PORT2_WINDOWED : out STD_LOGIC_VECTOR (17 downto 0);
REF_WINDOWED : out STD_LOGIC_VECTOR (15 downto 0); REF_WINDOWED : out STD_LOGIC_VECTOR (17 downto 0);
WINDOWING_DONE : out STD_LOGIC; WINDOWING_DONE : out STD_LOGIC;
NSAMPLES : in STD_LOGIC_VECTOR (12 downto 0)); NSAMPLES : in STD_LOGIC_VECTOR (12 downto 0));
end Windowing; end Windowing;
@ -171,19 +171,19 @@ begin
WINDOWING_DONE <= '0'; WINDOWING_DONE <= '0';
mult_enable <= '1'; mult_enable <= '1';
mult_b(15 downto 0) <= (others => '0'); mult_b(15 downto 0) <= (others => '0');
PORT1_WINDOWED <= mult_p(30 downto 15); PORT1_WINDOWED <= mult_p(30 downto 13);
state <= StorePort2; state <= StorePort2;
when StorePort2 => when StorePort2 =>
WINDOWING_DONE <= '0'; WINDOWING_DONE <= '0';
mult_enable <= '1'; mult_enable <= '1';
mult_b(15 downto 0) <= (others => '0'); mult_b(15 downto 0) <= (others => '0');
PORT2_WINDOWED <= mult_p(30 downto 15); PORT2_WINDOWED <= mult_p(30 downto 13);
state <= StoreRef; state <= StoreRef;
when StoreRef => when StoreRef =>
WINDOWING_DONE <= '1'; WINDOWING_DONE <= '1';
mult_enable <= '0'; mult_enable <= '0';
mult_b(15 downto 0) <= (others => '0'); mult_b(15 downto 0) <= (others => '0');
REF_WINDOWED <= mult_p(30 downto 15); REF_WINDOWED <= mult_p(30 downto 13);
-- update window increment -- update window increment
if window_sample_cnt + window_sample_cnt_inc < window_sample_compare then if window_sample_cnt + window_sample_cnt_inc < window_sample_compare then
window_sample_cnt <= window_sample_cnt + window_sample_cnt_inc; window_sample_cnt <= window_sample_cnt + window_sample_cnt_inc;

68
FPGA/VNA/ipcore_dir/SinCosMult.xco
View File

@ -1,68 +0,0 @@
##############################################################
#
# Xilinx Core Generator version 14.6
# Date: Tue May 5 15:41:30 2020
#
##############################################################
#
# This file contains the customisation parameters for a
# Xilinx CORE Generator IP GUI. It is strongly recommended
# that you do not manually alter this file as it may cause
# unexpected and unsupported behavior.
#
##############################################################
#
# Generated from component: xilinx.com:ip:mult_gen:11.2
#
##############################################################
#
# BEGIN Project Options
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = VHDL
SET device = xc6slx9
SET devicefamily = spartan6
SET flowvendor = Other
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = tqg144
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -2
SET verilogsim = false
SET vhdlsim = true
# END Project Options
# BEGIN Select
SELECT Multiplier xilinx.com:ip:mult_gen:11.2
# END Select
# BEGIN Parameters
CSET ccmimp=Distributed_Memory
CSET clockenable=false
CSET component_name=SinCosMult
CSET constvalue=129
CSET internaluser=0
CSET multiplier_construction=Use_Mults
CSET multtype=Parallel_Multiplier
CSET optgoal=Speed
CSET outputwidthhigh=31
CSET outputwidthlow=0
CSET pipestages=2
CSET portatype=Signed
CSET portawidth=16
CSET portbtype=Signed
CSET portbwidth=16
CSET roundpoint=0
CSET sclrcepriority=SCLR_Overrides_CE
CSET syncclear=false
CSET use_custom_output_width=false
CSET userounding=false
CSET zerodetect=false
# END Parameters
# BEGIN Extra information
MISC pkg_timestamp=2012-11-05T14:23:07Z
# END Extra information
GENERATE
# CRC: 7fa795cb

73
FPGA/VNA/ipcore_dir/SinCosMult.xise
View File

@ -1,73 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
<header>
<!-- ISE source project file created by Project Navigator. -->
<!-- -->
<!-- This file contains project source information including a list of -->
<!-- project source files, project and process properties. This file, -->
<!-- along with the project source files, is sufficient to open and -->
<!-- implement in ISE Project Navigator. -->
<!-- -->
<!-- Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved. -->
</header>
<version xil_pn:ise_version="14.6" xil_pn:schema_version="2"/>
<files>
<file xil_pn:name="SinCosMult.ngc" xil_pn:type="FILE_NGC">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="SinCosMult.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="1"/>
<association xil_pn:name="Implementation" xil_pn:seqID="1"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="4"/>
</file>
</files>
<properties>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device" xil_pn:value="xc6slx9" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Family" xil_pn:value="Spartan6" xil_pn:valueState="non-default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Stop View" xil_pn:value="PreSynthesis" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="Architecture|SinCosMult|SinCosMult_a" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top File" xil_pn:value="SinCosMult.vhd" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/SinCosMult" xil_pn:valueState="non-default"/>
<property xil_pn:name="Package" xil_pn:value="tqg144" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Project Generator" xil_pn:value="CoreGen" xil_pn:valueState="non-default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-2" xil_pn:valueState="non-default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_DesignName" xil_pn:value="SinCosMult" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2020-05-05T17:41:58" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="BF44F186592C9F85C9D39935A7CA77A0" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties>
<bindings/>
<libraries/>
<autoManagedFiles>
<!-- The following files are identified by `include statements in verilog -->
<!-- source files and are automatically managed by Project Navigator. -->
<!-- -->
<!-- Do not hand-edit this section, as it will be overwritten when the -->
<!-- project is analyzed based on files automatically identified as -->
<!-- include files. -->
</autoManagedFiles>
</project>

6
FPGA/VNA/ipcore_dir/result_bram.xco
View File

@ -1,7 +1,7 @@
############################################################## ##############################################################
# #
# Xilinx Core Generator version 14.6 # Xilinx Core Generator version 14.6
# Date: Tue Nov 3 21:55:11 2020 # Date: Sat Nov 7 15:56:38 2020
# #
############################################################## ##############################################################
# #
@ -97,7 +97,7 @@ CSET use_regcea_pin=false
CSET use_regceb_pin=false CSET use_regceb_pin=false
CSET use_rsta_pin=false CSET use_rsta_pin=false
CSET use_rstb_pin=false CSET use_rstb_pin=false
CSET write_depth_a=64 CSET write_depth_a=256
CSET write_width_a=192 CSET write_width_a=192
CSET write_width_b=192 CSET write_width_b=192
# END Parameters # END Parameters
@ -105,4 +105,4 @@ CSET write_width_b=192
MISC pkg_timestamp=2012-11-19T16:22:25Z MISC pkg_timestamp=2012-11-19T16:22:25Z
# END Extra information # END Extra information
GENERATE GENERATE
# CRC: 64af2239 # CRC: 14273b86

345
FPGA/VNA/ipcore_dir/result_bram.xise
View File

@ -17,11 +17,11 @@
<files> <files>
<file xil_pn:name="result_bram.ngc" xil_pn:type="FILE_NGC"> <file xil_pn:name="result_bram.ngc" xil_pn:type="FILE_NGC">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/> <association xil_pn:name="Implementation" xil_pn:seqID="2"/>
</file> </file>
<file xil_pn:name="result_bram.vhd" xil_pn:type="FILE_VHDL"> <file xil_pn:name="result_bram.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="1"/> <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="Implementation" xil_pn:seqID="1"/> <association xil_pn:name="Implementation" xil_pn:seqID="4"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="4"/> <association xil_pn:name="PostMapSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="4"/> <association xil_pn:name="PostRouteSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="4"/> <association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="4"/>
@ -29,30 +29,359 @@
</files> </files>
<properties> <properties>
<property xil_pn:name="AES Initial Vector spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="AES Initial Vector virtex6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="AES Key (Hex String) spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="AES Key (Hex String) virtex6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Add I/O Buffers" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Logic Optimization Across Hierarchy" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow SelectMAP Pins to Persist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unexpanded Blocks" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched LOC Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched Timing Group Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Analysis Effort Level" xil_pn:value="Standard" xil_pn:valueState="default"/>
<property xil_pn:name="Asynchronous To Synchronous" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/> <property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/>
<property xil_pn:name="Automatic BRAM Packing" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Insert glbl Module in the Netlist" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Run Generate Target PROM/ACE File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="BPI Reads Per Page" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="BPI Sync Mode" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="BRAM Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Set/Reset Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Tristate Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bus Delimiter" xil_pn:value="&lt;>" xil_pn:valueState="default"/>
<property xil_pn:name="Case" xil_pn:value="Maintain" xil_pn:valueState="default"/>
<property xil_pn:name="Case Implementation Style" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To Post Trace" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Combinatorial Logic Optimization" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Compile EDK Simulation Library" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Compile SIMPRIM (Timing) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile UNISIM (Functional) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile XilinxCoreLib (CORE Generator) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile for HDL Debugging" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Clk (Configuration Pins)" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Done" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Init" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M0" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M1" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M2" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Program" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate spartan6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate virtex5" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Correlate Output to Input Design" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ASCII Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Binary Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Bit File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Create I/O Pads from Ports" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create IEEE 1532 Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create IEEE 1532 Configuration File spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Logic Allocation File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Mask File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ReadBack Data Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cross Clock Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cycles for First BPI Page Read" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="DCI Update Mode" xil_pn:value="As Required" xil_pn:valueState="default"/>
<property xil_pn:name="DSP Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Delay Values To Be Read from SDF" xil_pn:value="Setup Time" xil_pn:valueState="default"/>
<property xil_pn:name="Device" xil_pn:value="xc6slx9" xil_pn:valueState="non-default"/> <property xil_pn:name="Device" xil_pn:value="xc6slx9" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Family" xil_pn:value="Spartan6" xil_pn:valueState="non-default"/> <property xil_pn:name="Device Family" xil_pn:value="Spartan6" xil_pn:valueState="non-default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="non-default"/> <property xil_pn:name="Device Speed Grade/Select ABS Minimum" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Implementation Stop View" xil_pn:value="PreSynthesis" xil_pn:valueState="non-default"/> <property xil_pn:name="Disable Detailed Package Model Insertion" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Disable JTAG Connection" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Do Not Escape Signal and Instance Names in Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Done (Output Events)" xil_pn:value="Default (4)" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Awake Pin During Suspend/Wake Sequence spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Done Pin High" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable BitStream Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Cyclic Redundancy Checking (CRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Cyclic Redundancy Checking (CRC) spartan6" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Debugging of Serial Mode BitStream" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable External Master Clock" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Enable External Master Clock spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Pin Wake-Up Suspend Mode spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading par spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading par virtex5" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Outputs (Output Events)" xil_pn:value="Default (5)" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Suspend/Wake Global Set/Reset spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Bitstream spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Bitstream virtex6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Key Select spartan6" xil_pn:value="BBRAM" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Key Select virtex6" xil_pn:value="BBRAM" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Essential Bits" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Evaluation Development Board" xil_pn:value="None Specified" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of Deprecated EDK Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of EDK Sub-Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Cost Tables Map" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Cost Tables Map virtex6" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort (Highest PAR level only)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="FPGA Start-Up Clock" xil_pn:value="CCLK" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Style" xil_pn:value="LUT" xil_pn:valueState="default"/>
<property xil_pn:name="Fallback Reconfiguration virtex7" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Flatten Output Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Coregen" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Schematic" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="GTS Cycle During Suspend/Wakeup Sequence spartan6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="GWE Cycle During Suspend/Wakeup Sequence spartan6" xil_pn:value="5" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Architecture Only (No Entity Declaration)" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Asynchronous Delay Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Clock Region Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Detailed MAP Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Multiple Hierarchical Netlist Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Power Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Simulation Model" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate RTL Schematic" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Generate SAIF File for Power Optimization/Estimation Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Testbench File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generics, Parameters" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization Goal" xil_pn:value="AllClockNets" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization map spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization map virtex5" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Global Set/Reset Port Name" xil_pn:value="GSR_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Global Tristate Port Name" xil_pn:value="GTS_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="HMAC Key (Hex String)" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Hierarchy Separator" xil_pn:value="/" xil_pn:valueState="default"/>
<property xil_pn:name="ICAP Select" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="ISim UUT Instance Name" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Implementation Stop View" xil_pn:value="Structural" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="Architecture|result_bram|result_bram_a" xil_pn:valueState="non-default"/> <property xil_pn:name="Implementation Top" xil_pn:value="Architecture|result_bram|result_bram_a" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top File" xil_pn:value="result_bram.vhd" xil_pn:valueState="non-default"/> <property xil_pn:name="Implementation Top File" xil_pn:value="result_bram.vhd" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/result_bram" xil_pn:valueState="non-default"/> <property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/result_bram" xil_pn:valueState="non-default"/>
<property xil_pn:name="Include 'uselib Directive in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include SIMPRIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include UNISIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include sdf_annotate task in Verilog File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Incremental Compilation" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Insert Buffers to Prevent Pulse Swallowing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Instantiation Template Target Language Xps" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TCK" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDI" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDO" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TMS" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG to XADC Connection" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="Keep Hierarchy" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Xst" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Language" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Launch SDK after Export" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Library for Verilog Sources" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Load glbl" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Manual Implementation Compile Order" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Map Slice Logic into Unused Block RAMs" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Mask Pins for Multi-Pin Wake-Up Suspend Mode spartan6" xil_pn:value="0x00" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Number of Lines in Report" xil_pn:value="1000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Signal Name Length" xil_pn:value="20" xil_pn:valueState="default"/>
<property xil_pn:name="Move First Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Move Last Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Insert IPROG CMD in the Bitfile spartan6" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Insert IPROG CMD in the Bitfile virtex7" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Next Configuration Mode spartan6" xil_pn:value="001" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Starting Address for Golden Configuration spartan6" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Starting Address for Next Configuration spartan6" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Use New Mode for Next Configuration spartan6" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: User-Defined Register for Failsafe Scheme spartan6" xil_pn:value="0x0000" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Translation Type" xil_pn:value="Timestamp" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="16" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort spartan6" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort virtex6" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Goal" xil_pn:value="Speed" xil_pn:valueState="default"/>
<property xil_pn:name="Optimize Instantiated Primitives" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Other Bitgen Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Bitgen Command Line Options spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Par" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compxlib Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Map Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other NETGEN Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Ngdbuild Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Place &amp; Route Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XPWR Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XST Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Output Extended Identifiers" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Output File Name" xil_pn:value="result_bram" xil_pn:valueState="default"/>
<property xil_pn:name="Overwrite Compiled Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers into IOBs" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers/Latches into IOBs" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Package" xil_pn:value="tqg144" xil_pn:valueState="default"/> <property xil_pn:name="Package" xil_pn:value="tqg144" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Place &amp; Route Effort Level (Overall)" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Place And Route Mode" xil_pn:value="Normal Place and Route" xil_pn:valueState="default"/>
<property xil_pn:name="Place MultiBoot Settings into Bitstream spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Place MultiBoot Settings into Bitstream virtex7" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level Map" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Extra Effort Map" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Port to be used" xil_pn:value="Auto - default" xil_pn:valueState="default"/>
<property xil_pn:name="Post Map Simulation Model Name" xil_pn:value="result_bram_map.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Place &amp; Route Simulation Model Name" xil_pn:value="result_bram_timesim.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Synthesis Simulation Model Name" xil_pn:value="result_bram_synthesis.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Translate Simulation Model Name" xil_pn:value="result_bram_translate.v" xil_pn:valueState="default"/>
<property xil_pn:name="Power Down Device if Over Safe Temperature" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map virtex6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Xst" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/> <property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Produce Verbose Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Project Generator" xil_pn:value="CoreGen" xil_pn:valueState="non-default"/> <property xil_pn:name="Project Generator" xil_pn:value="CoreGen" xil_pn:valueState="non-default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/> <property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Read Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Reduce Control Sets" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Regenerate Core" xil_pn:value="Under Current Project Setting" xil_pn:valueState="default"/>
<property xil_pn:name="Register Balancing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Register Ordering spartan6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="Register Ordering virtex6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="Release Write Enable (Output Events)" xil_pn:value="Default (6)" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Design Instance in Testbench File to" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Architecture To" xil_pn:value="Structure" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Entity to" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Module To" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type Post Trace" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths Post Trace" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Reset On Configuration Pulse Width" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Resource Sharing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retain Hierarchy" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retry Configuration if CRC Error Occurs spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Revision Select" xil_pn:value="00" xil_pn:valueState="default"/>
<property xil_pn:name="Revision Select Tristate" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Run Design Rules Checker (DRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Par" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="SPI 32-bit Addressing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Source Node" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Set SPI Configuration Bus Width" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Set SPI Configuration Bus Width spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Setup External Master Clock Division spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Minimum Size spartan6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Minimum Size virtex6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Show All Models" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Model Target" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time ISim" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Map" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Par" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Translate" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/> <property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-2" xil_pn:valueState="non-default"/> <property xil_pn:name="Speed Grade" xil_pn:value="-2" xil_pn:valueState="non-default"/>
<property xil_pn:name="Starting Address for Fallback Configuration virtex7" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100)" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Map spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/> <property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Target Simulator" xil_pn:value="Please Specify" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Map" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Par" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Module Name in Output Netlist" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/> <property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/> <property xil_pn:name="Trim Unconnected Signals" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Tristate On Configuration Pulse Width" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Unused IOB Pins" xil_pn:value="Pull Down" xil_pn:valueState="default"/>
<property xil_pn:name="Use 64-bit PlanAhead on 64-bit Systems" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use Clock Enable" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Route" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Behav" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use DSP Block" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use DSP Block spartan6" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use LOC Constraints" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use RLOC Constraints" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use SPI Falling Edge" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Use Smart Guide" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Reset" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Set" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synthesis Constraints File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="User Access Register Value" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="UserID Code (8 Digit Hexadecimal)" xil_pn:value="0xFFFFFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="VCCAUX Voltage Level spartan6" xil_pn:value="2.5V" xil_pn:valueState="default"/>
<property xil_pn:name="VHDL Source Analysis Standard" xil_pn:value="VHDL-93" xil_pn:valueState="default"/>
<property xil_pn:name="Value Range Check" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog Macros" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DCI Match (Output Events) virtex5" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DCM and PLL Lock (Output Events) spartan6" xil_pn:value="Default (NoWait)" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for PLL Lock (Output Events) virtex6" xil_pn:value="No Wait" xil_pn:valueState="default"/>
<property xil_pn:name="Wakeup Clock spartan6" xil_pn:value="Startup Clock" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Mode 7-series" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Value 7-series" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Value spartan6" xil_pn:value="0xFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="default"/>
<property xil_pn:name="Write Timing Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<!-- --> <!-- -->
<!-- The following properties are for internal use only. These should not be modified.--> <!-- The following properties are for internal use only. These should not be modified.-->
<!-- --> <!-- -->
<property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_DesignName" xil_pn:value="result_bram" xil_pn:valueState="non-default"/> <property xil_pn:name="PROP_DesignName" xil_pn:value="result_bram" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/> <property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2020-11-03T22:56:00" xil_pn:valueState="non-default"/> <property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="954C7EB37A9CAA0D6F0F8CE18AB6F28F" xil_pn:valueState="non-default"/> <property xil_pn:name="PROP_PostMapSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostParSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostSynthSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostXlateSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PreSynthesis" xil_pn:value="PreSynthesis" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2020-11-07T16:57:27" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="B5404264344E1435540FD7484D40A487" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/> <property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/> <property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties> </properties>

BIN
FPGA/VNA/top.bin
View File

Binary file not shown.

24
FPGA/VNA/top.vhd
View File

@ -156,9 +156,9 @@ architecture Behavioral of top is
REF_RAW : IN std_logic_vector(15 downto 0); REF_RAW : IN std_logic_vector(15 downto 0);
ADC_READY : IN std_logic; ADC_READY : IN std_logic;
NSAMPLES : IN std_logic_vector(12 downto 0); NSAMPLES : IN std_logic_vector(12 downto 0);
PORT1_WINDOWED : OUT std_logic_vector(15 downto 0); PORT1_WINDOWED : OUT std_logic_vector(17 downto 0);
PORT2_WINDOWED : OUT std_logic_vector(15 downto 0); PORT2_WINDOWED : OUT std_logic_vector(17 downto 0);
REF_WINDOWED : OUT std_logic_vector(15 downto 0); REF_WINDOWED : OUT std_logic_vector(17 downto 0);
WINDOWING_DONE : OUT std_logic WINDOWING_DONE : OUT std_logic
); );
END COMPONENT; END COMPONENT;
@ -170,9 +170,9 @@ architecture Behavioral of top is
RESET : IN std_logic; RESET : IN std_logic;
ADC_PRESCALER : in STD_LOGIC_VECTOR(7 downto 0); ADC_PRESCALER : in STD_LOGIC_VECTOR(7 downto 0);
PHASEINC : in STD_LOGIC_VECTOR(11 downto 0); PHASEINC : in STD_LOGIC_VECTOR(11 downto 0);
PORT1 : IN std_logic_vector(15 downto 0); PORT1 : IN std_logic_vector(17 downto 0);
PORT2 : IN std_logic_vector(15 downto 0); PORT2 : IN std_logic_vector(17 downto 0);
REF : IN std_logic_vector(15 downto 0); REF : IN std_logic_vector(17 downto 0);
NEW_SAMPLE : IN std_logic; NEW_SAMPLE : IN std_logic;
START : IN std_logic; START : IN std_logic;
SAMPLES : IN std_logic_vector(12 downto 0); SAMPLES : IN std_logic_vector(12 downto 0);
@ -277,8 +277,8 @@ architecture Behavioral of top is
PORT( PORT(
CLK : IN std_logic; CLK : IN std_logic;
RESET : IN std_logic; RESET : IN std_logic;
PORT1 : IN std_logic_vector(15 downto 0); PORT1 : IN std_logic_vector(17 downto 0);
PORT2 : IN std_logic_vector(15 downto 0); PORT2 : IN std_logic_vector(17 downto 0);
NEW_SAMPLE : IN std_logic; NEW_SAMPLE : IN std_logic;
NSAMPLES : IN std_logic_vector(12 downto 0); NSAMPLES : IN std_logic_vector(12 downto 0);
BIN1_PHASEINC : IN std_logic_vector(15 downto 0); BIN1_PHASEINC : IN std_logic_vector(15 downto 0);
@ -342,9 +342,9 @@ architecture Behavioral of top is
signal adc_minmax : std_logic_vector(95 downto 0); signal adc_minmax : std_logic_vector(95 downto 0);
signal adc_reset_minmax : std_logic; signal adc_reset_minmax : std_logic;
signal port1_windowed : std_logic_vector(15 downto 0); signal port1_windowed : std_logic_vector(17 downto 0);
signal port2_windowed : std_logic_vector(15 downto 0); signal port2_windowed : std_logic_vector(17 downto 0);
signal ref_windowed : std_logic_vector(15 downto 0); signal ref_windowed : std_logic_vector(17 downto 0);
signal windowing_ready : std_logic; signal windowing_ready : std_logic;
-- Sampling signals -- Sampling signals
@ -753,7 +753,7 @@ begin
dft_reset <= not dft_enable; dft_reset <= not dft_enable;
SA_DFT: DFT GENERIC MAP(BINS => 64) SA_DFT: DFT GENERIC MAP(BINS => 96)
PORT MAP( PORT MAP(
CLK => clk160, CLK => clk160,
RESET => dft_reset, RESET => dft_reset,

12
Software/PC_Application/Device/device.cpp
View File

@ -129,12 +129,12 @@ static constexpr Protocol::DeviceInfo defaultInfo = {
.limits_minFreq = 0, .limits_minFreq = 0,
.limits_maxFreq = 6000000000, .limits_maxFreq = 6000000000,
.limits_minIFBW = 10, .limits_minIFBW = 10,
.limits_maxIFBW = 50000, .limits_maxIFBW = 1000000,
.limits_maxPoints = 4501, .limits_maxPoints = 10000,
.limits_cdbm_min = -4000, .limits_cdbm_min = -10000,
.limits_cdbm_max = 0, .limits_cdbm_max = 1000,
.limits_minRBW = 15, .limits_minRBW = 1,
.limits_maxRBW = 100000, .limits_maxRBW = 1000000,
}; };
Protocol::DeviceInfo Device::lastInfo = defaultInfo; Protocol::DeviceInfo Device::lastInfo = defaultInfo;

4
Software/PC_Application/SpectrumAnalyzer/spectrumanalyzer.cpp
View File

@ -232,8 +232,8 @@ using namespace std;
void SpectrumAnalyzer::NewDatapoint(Protocol::SpectrumAnalyzerResult d) void SpectrumAnalyzer::NewDatapoint(Protocol::SpectrumAnalyzerResult d)
{ {
// TODO level adjustment in device // TODO level adjustment in device
d.port1 /= pow(10.0, 7.5); d.port1 /= 126500000.0;
d.port2 /= pow(10.0, 7.5); d.port2 /= 126500000.0;
d = average.process(d); d = average.process(d);
traceModel.addSAData(d); traceModel.addSAData(d);
emit dataChanged(); emit dataChanged();

2
Software/VNA_embedded/Application/Drivers/FPGA/FPGA.hpp
View File

@ -6,7 +6,7 @@
namespace FPGA { namespace FPGA {
static constexpr uint16_t MaxPoints = 4501; static constexpr uint16_t MaxPoints = 4501;
static constexpr uint16_t DFTbins = 64; static constexpr uint16_t DFTbins = 96;
static constexpr uint32_t Clockrate = 102400000UL; static constexpr uint32_t Clockrate = 102400000UL;
enum class Reg { enum class Reg {