/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file    usbpd_pwr_user.h
  * @author  MCD Application Team
  * @brief   Header file for usbpd_pwr_user.c file
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under Ultimate Liberty license
  * SLA0044, the "License"; You may not use this file except in compliance with
  * the License. You may obtain a copy of the License at:
  *                             www.st.com/SLA0044
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBPD_PWR_USER_H_
#define __USBPD_PWR_USER_H_

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32g4xx.h"

/** @addtogroup BSP
  * @{
  */

/** @addtogroup POWER
  * @{
  */

/** @defgroup POWER_Exported_Types Exported Types
  * @{
  */

/**
  * @brief  POWER Status
  */
typedef enum
{
    PWR_OK = 0,
    PWR_ERROR
} PWR_StatusTypeDef;

/**
  * @brief  Power role
  */
typedef enum
{
    POWER_ROLE_SOURCE = 0,
    POWER_ROLE_SINK,
    POWER_ROLE_DUAL
} PWR_PowerRoleTypeDef;

/**
  * @brief  Voltage control mode
  */
typedef enum
{
    DCDC_CTRL_MODE_UNKNOWN = 0,
    DCDC_CTRL_MODE_GPIO,
    DCDC_CTRL_MODE_PWM,
} PWR_DCDCCtrlModeTypeDef;

/**
  * @brief  VBUS connection status
  */
typedef enum
{
    VBUS_CONNECTED = 0,
    VBUS_NOT_CONNECTED
} PWR_VBUSConnectionStatusTypeDef;

/**
  * @brief VBUS Detection Callback
  */
typedef void PWR_VBUSDetectCallbackFunc(uint32_t PortId,
                                        PWR_VBUSConnectionStatusTypeDef VBUSConnectionStatus);

/**
  * @}
  */

/** @defgroup POWER_Exported_Constants Exported Constants
  * @{
  */
/**
  * @brief  Number of TypeC ports
  */
#define PWR_TYPEC_PORT_NB 2

/**
  * @brief  Type-C port identifier
  */
#define TYPE_C_PORT_1  0
#define TYPE_C_PORT_2  1

/**
  * @brief  CC pin identifier
  */
#define TYPE_C_CC1     1
#define TYPE_C_CC2     2

/**
  * @brief  VBUS disconnection threshold values (in mV)
  */
#define BSP_PWR_HIGH_VBUS_THRESHOLD     (4500)
#define BSP_PWR_LOW_VBUS_THRESHOLD       (800)

/**
  * @brief  VBUS discharge parameters
  */
#define BSP_PWR_DISCHARGE_MARGIN        (500)
#define BSP_PWR_DISCHARGE_TIME            (6)

/**
  * @brief  Calibration settings
  */
#define BSP_PWR_DCDC_PRECISION          (40)     /* DCDC output precision set to 40mV (Noise)*/
#define BSP_PWR_CALIBRATION_ENABLED     (1)
#define BSP_PWR_CALIBRATION_DISABLED    (0)

/**
  * @brief  Standard VBUS voltage levels
  */
#define BSP_PWR_VBUS_5V                 5000
#define BSP_PWR_VBUS_9V                 9000
#define BSP_PWR_VBUS_15V                15000

/**
  * @brief  power timeout
  */
#define BSP_PWR_TIMEOUT_PDO             250u
#define BSP_PWR_TIMEOUT_APDO             25u

/**
  * @brief  Invalid value set during issue with voltage setting
  */
#define BSP_PWR_INVALID_VALUE           0xFFFFFFFFu

/**
  * @}
  */

/** @defgroup POWER_Exported_Functions Exported Functions
  * @{
  */
PWR_StatusTypeDef BSP_PWR_VBUSInit(uint32_t PortId);

PWR_StatusTypeDef BSP_PWR_VBUSDeInit(uint32_t PortId);

PWR_StatusTypeDef BSP_PWR_VBUSOn(uint32_t PortId);

PWR_StatusTypeDef BSP_PWR_VBUSOff(uint32_t PortId);

PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Fixed(uint32_t PortNum,
                                               uint32_t VbusTargetInmv,
                                               uint32_t OperatingCurrent,
                                               uint32_t MaxOperatingCurrent);

PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Variable(uint32_t PortNum,
                                                  uint32_t VbusTargetMaxInmv,
                                                  uint32_t VbusTargetMinInmv,
                                                  uint32_t OperatingCurrent,
                                                  uint32_t MaxOperatingCurrent);

PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Battery(uint32_t PortId,
                                                 uint32_t VbusTargetMin,
                                                 uint32_t VbusTargetMax,
                                                 uint32_t OperatingPower,
                                                 uint32_t MaxOperatingPower);

PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_APDO(uint32_t PortId,
                                              uint32_t VbusTargetInmv,
                                              uint32_t OperatingCurrent,
                                              int32_t Delta);

uint32_t BSP_PWR_VBUSGetVoltage(uint32_t PortId);

int32_t BSP_PWR_VBUSGetCurrent(uint32_t PortId);

PWR_StatusTypeDef BSP_PWR_VCONNInit(uint32_t PortId,
                                    uint32_t CCPinId);

PWR_StatusTypeDef BSP_PWR_VCONNDeInit(uint32_t PortId,
                                      uint32_t CCPinId);

PWR_StatusTypeDef BSP_PWR_VCONNOn(uint32_t PortId,
                                  uint32_t CCPinId);

PWR_StatusTypeDef BSP_PWR_VCONNOff(uint32_t PortId,
                                   uint32_t CCPinId);

void BSP_PWR_SetVBUSDisconnectionThreshold(uint32_t PortId,
                                           uint32_t VoltageThreshold);

PWR_StatusTypeDef BSP_PWR_RegisterVBUSDetectCallback(uint32_t                      PortId,
                                                     PWR_VBUSDetectCallbackFunc *  pfnVBUSDetectCallback);

uint8_t BSP_PWR_VBUSIsOn(uint32_t PortId);

uint8_t BSP_PWR_VCONNIsOn(uint32_t PortId,
                          uint32_t CCPinId);

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32G081B_EVAL_POWER */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/