Add DDS and noise signal generator, plus WIP demodulation
This commit is contained in:
David Shah
parent
4a753eff6a
commit
b493d6776e
259
fpga/ad9361/ad9361_bidir_if.vhd
Normal file
259
fpga/ad9361/ad9361_bidir_if.vhd
Normal file
@ -0,0 +1,259 @@
|
||||
library IEEE;
|
||||
use IEEE.STD_LOGIC_1164.ALL;
|
||||
use IEEE.NUMERIC_STD.ALL;
|
||||
|
||||
library UNISIM;
|
||||
use UNISIM.VComponents.all;
|
||||
|
||||
--AD9361 1Rx1Tx LVDS DDR interface
|
||||
--Copyright (C) 2016-17 David Shah
|
||||
--Licensed under the MIT License
|
||||
|
||||
entity ad9361_sdr_bidir_if is
|
||||
port(
|
||||
--AD9361 side
|
||||
data_clock_p : in std_logic;
|
||||
data_clock_n : in std_logic;
|
||||
fb_clock_p : out std_logic;
|
||||
fb_clock_n : out std_logic;
|
||||
|
||||
rx_frame_p : in std_logic;
|
||||
rx_frame_n : in std_logic;
|
||||
tx_frame_p : out std_logic;
|
||||
tx_frame_n : out std_logic;
|
||||
|
||||
p0_d : out std_logic_vector(11 downto 0);
|
||||
p1_d : in std_logic_vector(11 downto 0);
|
||||
|
||||
--User side
|
||||
user_clock : out std_logic;
|
||||
rx_data_frame : out std_logic;
|
||||
rx_data_i : out std_logic_vector(11 downto 0);
|
||||
rx_data_q : out std_logic_vector(11 downto 0);
|
||||
|
||||
tx_data_i : in std_logic_vector(11 downto 0);
|
||||
tx_data_q : in std_logic_vector(11 downto 0);
|
||||
tx_data_req : out std_logic);
|
||||
end ad9361_sdr_bidir_if;
|
||||
|
||||
--The following pairs are swapped (ie inverted) on the PCB
|
||||
--RX_FRAME; TX_FRAME, TX_D0, FB_CLK, RX_D5, RX_D3, RX_D4
|
||||
--TODO: change this setting to be a VHDL generic
|
||||
|
||||
architecture Behavioral of ad9361_sdr_bidir_if is
|
||||
signal clock_se, clock_buf, fb_clock_se : std_logic;
|
||||
signal input_data_se : std_logic_vector(5 downto 0);
|
||||
signal input_data_sdr_rp, input_data_sdr_fp, input_data_sdr_r, input_data_sdr_f : std_logic_vector(5 downto 0);
|
||||
signal output_data_se : std_logic_vector(5 downto 0);
|
||||
signal output_data_sdr_rp, output_data_sdr_fp, output_data_sdr_r, output_data_sdr_f : std_logic_vector(5 downto 0);
|
||||
|
||||
signal rx_data_lat_i, tx_data_lat_i : std_logic_vector(11 downto 0);
|
||||
signal rx_data_lat_q, tx_data_lat_q : std_logic_vector(11 downto 0);
|
||||
signal rx_frame_se_pre, rx_frame_se, tx_frame_se, tx_frame_se_pre, tx_frame_se_inv : std_logic;
|
||||
begin
|
||||
clkibuf : IBUFDS
|
||||
generic map(
|
||||
IBUF_LOW_PWR => FALSE,
|
||||
IOSTANDARD => "DEFAULT")
|
||||
port map(
|
||||
O => clock_se,
|
||||
I => data_clock_p,
|
||||
IB => data_clock_n
|
||||
);
|
||||
clkbufio : BUFR
|
||||
generic map(
|
||||
BUFR_DIVIDE => "BYPASS",
|
||||
SIM_DEVICE => "7SERIES")
|
||||
port map(
|
||||
O => clock_buf,
|
||||
CE => '1',
|
||||
CLR => '0',
|
||||
I => clock_se);
|
||||
|
||||
fbclkdrv : ODDR
|
||||
generic map(
|
||||
DDR_CLK_EDGE => "OPPOSITE_EDGE",
|
||||
INIT => '0',
|
||||
SRTYPE => "SYNC")
|
||||
port map(
|
||||
Q => fb_clock_se,
|
||||
C => clock_buf,
|
||||
CE => '1',
|
||||
D1 => '0',
|
||||
D2 => '1',
|
||||
R => '0',
|
||||
S => '0');
|
||||
|
||||
clkobuf : OBUFDS
|
||||
generic map(
|
||||
IOSTANDARD => "DEFAULT",
|
||||
SLEW => "SLOW")
|
||||
port map(
|
||||
O => fb_clock_n,
|
||||
OB => fb_clock_p,
|
||||
I => fb_clock_se);
|
||||
|
||||
gen_io : for i in 0 to 5 generate
|
||||
gen_inv_i : if (i = 3) or (i = 4) or (i = 5) generate
|
||||
rxibuf : IBUFDS
|
||||
generic map(
|
||||
IBUF_LOW_PWR => FALSE,
|
||||
IOSTANDARD => "DEFAULT")
|
||||
port map(
|
||||
O => input_data_se(i),
|
||||
I => p1_d((i*2)),
|
||||
IB => p1_d((i*2)+1));
|
||||
input_data_sdr_rp(i) <= not input_data_sdr_r(i);
|
||||
input_data_sdr_fp(i) <= not input_data_sdr_f(i);
|
||||
end generate;
|
||||
|
||||
gen_true_i : if (i = 0) or (i = 1) or (i = 2) generate
|
||||
rxibuf : IBUFDS
|
||||
generic map(
|
||||
IBUF_LOW_PWR => FALSE,
|
||||
IOSTANDARD => "DEFAULT")
|
||||
port map(
|
||||
O => input_data_se(i),
|
||||
I => p1_d((i*2)+1),
|
||||
IB => p1_d(i*2));
|
||||
input_data_sdr_rp(i) <= input_data_sdr_r(i);
|
||||
input_data_sdr_fp(i) <= input_data_sdr_f(i);
|
||||
end generate;
|
||||
|
||||
rxiddr : IDDR
|
||||
generic map(
|
||||
DDR_CLK_EDGE => "OPPOSITE_EDGE",
|
||||
INIT_Q1 => '0',
|
||||
INIT_Q2 => '0',
|
||||
SRTYPE => "SYNC")
|
||||
port map(
|
||||
Q1 => input_data_sdr_r(i),
|
||||
Q2 => input_data_sdr_f(i),
|
||||
C => clock_buf,
|
||||
CE => '1',
|
||||
D => input_data_se(i),
|
||||
R => '0',
|
||||
S => '0');
|
||||
|
||||
txoddr : ODDR
|
||||
generic map(
|
||||
DDR_CLK_EDGE => "OPPOSITE_EDGE",
|
||||
INIT => '0',
|
||||
SRTYPE => "SYNC")
|
||||
port map(
|
||||
Q => output_data_se(i),
|
||||
C => clock_buf,
|
||||
CE => '1',
|
||||
D1 => output_data_sdr_rp(i),
|
||||
D2 => output_data_sdr_fp(i),
|
||||
R => '0',
|
||||
S => '0');
|
||||
|
||||
gen_inv_o : if (i = 0) generate
|
||||
txobuf : OBUFDS
|
||||
generic map(
|
||||
IOSTANDARD => "DEFAULT",
|
||||
SLEW => "SLOW")
|
||||
port map(
|
||||
O => p0_d((i*2)),
|
||||
OB => p0_d((i*2)+1),
|
||||
I => output_data_se(i));
|
||||
output_data_sdr_rp(i) <= not output_data_sdr_r(i);
|
||||
output_data_sdr_fp(i) <= not output_data_sdr_f(i);
|
||||
end generate;
|
||||
|
||||
gen_true_o : if (i /= 0) generate
|
||||
txobuf : OBUFDS
|
||||
generic map(
|
||||
IOSTANDARD => "DEFAULT",
|
||||
SLEW => "SLOW")
|
||||
port map(
|
||||
O => p0_d((i*2)+1),
|
||||
OB => p0_d(i*2),
|
||||
I => output_data_se(i));
|
||||
output_data_sdr_rp(i) <= output_data_sdr_r(i);
|
||||
output_data_sdr_fp(i) <= output_data_sdr_f(i);
|
||||
end generate;
|
||||
|
||||
end generate;
|
||||
|
||||
rxfbuf : IBUFDS
|
||||
generic map(
|
||||
IBUF_LOW_PWR => FALSE,
|
||||
IOSTANDARD => "DEFAULT")
|
||||
port map(
|
||||
O => rx_frame_se_pre,
|
||||
I => rx_frame_n,
|
||||
IB => rx_frame_p
|
||||
);
|
||||
|
||||
--ODDR for symmetrical latency between data and output
|
||||
txfoddr : ODDR
|
||||
generic map(
|
||||
DDR_CLK_EDGE => "OPPOSITE_EDGE",
|
||||
INIT => '0',
|
||||
SRTYPE => "SYNC")
|
||||
port map(
|
||||
Q => tx_frame_se_pre,
|
||||
C => clock_buf,
|
||||
CE => '1',
|
||||
D1 => tx_frame_se_inv,
|
||||
D2 => tx_frame_se_inv,
|
||||
R => '0',
|
||||
S => '0');
|
||||
|
||||
txfbuf : OBUFDS
|
||||
generic map(
|
||||
IOSTANDARD => "DEFAULT",
|
||||
SLEW => "SLOW")
|
||||
port map(
|
||||
O => tx_frame_n,
|
||||
OB => tx_frame_p,
|
||||
I => tx_frame_se_pre);
|
||||
|
||||
rx_frame_se <= not rx_frame_se_pre;
|
||||
tx_frame_se_inv <= not tx_frame_se;
|
||||
|
||||
process(clock_buf)
|
||||
begin
|
||||
if falling_edge(clock_buf) then
|
||||
if rx_frame_se = '1' then
|
||||
rx_data_lat_i(5 downto 0) <= input_data_sdr_fp;
|
||||
rx_data_lat_q(5 downto 0) <= input_data_sdr_rp;
|
||||
rx_data_frame <= '0';
|
||||
else
|
||||
rx_data_i <= rx_data_lat_i;
|
||||
rx_data_q <= rx_data_lat_q;
|
||||
rx_data_frame <= '1';
|
||||
rx_data_lat_i(11 downto 6) <= input_data_sdr_fp;
|
||||
rx_data_lat_q(11 downto 6) <= input_data_sdr_rp;
|
||||
end if;
|
||||
end if;
|
||||
end process;
|
||||
|
||||
process(clock_buf)
|
||||
begin
|
||||
if rising_edge(clock_buf) then
|
||||
if tx_frame_se = '0' then
|
||||
output_data_sdr_f <= tx_data_lat_i(11 downto 6);
|
||||
output_data_sdr_r <= tx_data_lat_q(11 downto 6);
|
||||
|
||||
tx_data_req <= '1';
|
||||
tx_frame_se <= '1';
|
||||
else
|
||||
output_data_sdr_f <= tx_data_lat_i(5 downto 0);
|
||||
output_data_sdr_r <= tx_data_lat_q(5 downto 0);
|
||||
|
||||
tx_data_lat_i <= tx_data_i;
|
||||
tx_data_lat_q <= tx_data_q;
|
||||
|
||||
tx_data_req <= '0';
|
||||
tx_frame_se <= '0';
|
||||
end if;
|
||||
end if;
|
||||
end process;
|
||||
|
||||
user_clock <= clock_buf;
|
||||
|
||||
|
||||
end Behavioral;
|
||||
@ -51,6 +51,12 @@ entity pc_control_handler is
|
||||
spi_start_xfer : out std_logic;
|
||||
spi_end_xfer : out std_logic;
|
||||
spi_done : in std_logic;
|
||||
|
||||
--Signal generator interface
|
||||
siggen_address : out std_logic_vector(7 downto 0);
|
||||
siggen_data : out std_logic_vector(31 downto 0);
|
||||
siggen_wren : out std_logic;
|
||||
|
||||
--Control outputs
|
||||
streaming_mode : out std_logic; --Asserted when in streaming mode
|
||||
control_signals : out std_logic_vector(7 downto 0) --General purpose control outputs
|
||||
@ -80,6 +86,9 @@ architecture Behavioral of pc_control_handler is
|
||||
--Leave streaming mode
|
||||
constant cmd_leave_stream_mode : cmd_t := x"31";
|
||||
|
||||
--Signal generator write: this does not produce as a response as it is often used within streaming mode
|
||||
constant cmd_siggen_write : cmd_t := x"40";
|
||||
|
||||
constant command_length : natural := 32;
|
||||
constant response_length : natural := 32;
|
||||
|
||||
@ -101,6 +110,10 @@ architecture Behavioral of pc_control_handler is
|
||||
signal spi_resp_d : std_logic_vector(7 downto 0);
|
||||
|
||||
signal spi_rden_last : std_logic := '0';
|
||||
|
||||
signal siggen_address_reg : std_logic_vector(7 downto 0);
|
||||
signal siggen_data_reg : std_logic_vector(31 downto 0);
|
||||
signal siggen_byte_count : natural range 0 to 5;
|
||||
begin
|
||||
|
||||
--Main state machine
|
||||
@ -129,7 +142,7 @@ begin
|
||||
|
||||
when 2 => --read command type
|
||||
current_command <= cmd_fifo_q;
|
||||
if cmd_fifo_q = cmd_enter_stream_mode then --this command has no response
|
||||
if cmd_fifo_q = cmd_enter_stream_mode or cmd_fifo_q = cmd_siggen_write then --this command has no response
|
||||
current_state <= 4;
|
||||
else
|
||||
current_state <= 3;
|
||||
@ -155,6 +168,10 @@ begin
|
||||
when cmd_set_ctrl_sig =>
|
||||
control_signals_reg <= cmd_fifo_q;
|
||||
current_state <= 13;
|
||||
when cmd_siggen_write =>
|
||||
siggen_address_reg <= cmd_fifo_q;
|
||||
current_state <= 9;
|
||||
siggen_byte_count <= 0;
|
||||
when others => --unknown/unsupported command: end without error for now
|
||||
current_state <= 13;
|
||||
end case;
|
||||
@ -166,9 +183,19 @@ begin
|
||||
current_state <= 13;
|
||||
end if;
|
||||
|
||||
when 9 => --siggen write data xfer
|
||||
if siggen_byte_count > 4 then
|
||||
current_state <= 10;
|
||||
else
|
||||
siggen_data_reg <= cmd_fifo_q & siggen_data_reg(31 downto 8);
|
||||
siggen_byte_count <= siggen_byte_count + 1;
|
||||
end if;
|
||||
when 10 => --siggen write out
|
||||
current_state <= 13;
|
||||
|
||||
when 13 => --end of command: read out any remaining payload bytes
|
||||
if command_bytes_read >= command_length then
|
||||
if current_command = cmd_enter_stream_mode then
|
||||
if current_command = cmd_enter_stream_mode or current_command = cmd_siggen_write then
|
||||
current_state <= 0;
|
||||
else
|
||||
current_state <= 14;
|
||||
@ -221,10 +248,11 @@ begin
|
||||
cmd_rden_int <= '1' when (current_state = 1) or (current_state = 4) or
|
||||
((current_state = 13) and (command_bytes_read < command_length)) or
|
||||
((current_state = 15) and (cmd_fifo_empty = '0')) or
|
||||
(((current_state = 6) or (current_state = 7)) and spi_cmd_rden_int = '1')
|
||||
(((current_state = 6) or (current_state = 7)) and spi_cmd_rden_int = '1') or
|
||||
(current_state = 9)
|
||||
else '0';
|
||||
|
||||
resp_wren_int <= '1' when (current_state = 3) or ((current_command /= cmd_enter_stream_mode)
|
||||
resp_wren_int <= '1' when (current_state = 3) or (((current_command /= cmd_enter_stream_mode) and (current_command /= cmd_siggen_write))
|
||||
and ((current_state = 5) or ((current_state = 7) and (spi_resp_wren_int = '1'))
|
||||
or ((current_state = 14) and (response_bytes_written < response_length)))) else '0';
|
||||
|
||||
@ -267,6 +295,9 @@ begin
|
||||
end if;
|
||||
end process;
|
||||
|
||||
siggen_address <= siggen_address_reg;
|
||||
siggen_data <= siggen_data_reg;
|
||||
siggen_wren <= '1' when current_state = 10 else '0';
|
||||
|
||||
streaming_mode <= streaming_mode_reg;
|
||||
control_signals <= control_signals_reg;
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
40121
fpga/projects/rx_tx_gen/rx_tx_gen.cache/ip/36cd08e45365c01a/sg_ila_sim_netlist.v
Executable file
40121
fpga/projects/rx_tx_gen/rx_tx_gen.cache/ip/36cd08e45365c01a/sg_ila_sim_netlist.v
Executable file
File diff suppressed because one or more lines are too long
23
fpga/projects/rx_tx_gen/rx_tx_gen.cache/ip/36cd08e45365c01a/sg_ila_stub.v
Executable file
23
fpga/projects/rx_tx_gen/rx_tx_gen.cache/ip/36cd08e45365c01a/sg_ila_stub.v
Executable file
@ -0,0 +1,23 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Fri Jun 23 16:51:36 2017
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub -rename_top decalper_eb_ot_sdeen_pot_pi_dehcac_xnilix -prefix
|
||||
// decalper_eb_ot_sdeen_pot_pi_dehcac_xnilix_ sg_ila_stub.v
|
||||
// Design : sg_ila
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "ila,Vivado 2016.3" *)
|
||||
module decalper_eb_ot_sdeen_pot_pi_dehcac_xnilix(clk, probe0, probe1, probe2)
|
||||
/* synthesis syn_black_box black_box_pad_pin="clk,probe0[7:0],probe1[31:0],probe2[0:0]" */;
|
||||
input clk;
|
||||
input [7:0]probe0;
|
||||
input [31:0]probe1;
|
||||
input [0:0]probe2;
|
||||
endmodule
|
||||
@ -0,0 +1,65 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<spirit:design xmlns:xilinx="http://www.xilinx.com" xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
|
||||
<spirit:vendor>xilinx.com</spirit:vendor>
|
||||
<spirit:library>ipcache</spirit:library>
|
||||
<spirit:name>5366650f24d3a6e9</spirit:name>
|
||||
<spirit:version>0</spirit:version>
|
||||
<spirit:componentInstances>
|
||||
<spirit:componentInstance>
|
||||
<spirit:instanceName>dbg_hub_CV</spirit:instanceName>
|
||||
<spirit:componentRef spirit:vendor="xilinx.com" spirit:library="ip" spirit:name="xsdbm" spirit:version="2.0"/>
|
||||
<spirit:configurableElementValues>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_BSCANID">76546592</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_BSCAN_MODE">false</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_BSCAN_MODE_WITH_CORE">false</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_BUILD_REVISION">0</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_CLKFBOUT_MULT_F">10.000</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_CLKOUT0_DIVIDE_F">10.000</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_CLK_INPUT_FREQ_HZ">300000000</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_CORE_MAJOR_VER">1</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_CORE_MINOR_ALPHA_VER">97</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_CORE_MINOR_VER">0</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_CORE_TYPE">1</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_DCLK_HAS_RESET">0</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_DIVCLK_DIVIDE">3</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_ENABLE_CLK_DIVIDER">false</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_EN_INT_SIM">1</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_FIFO_STYLE">SUBCORE</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_MAJOR_VERSION">14</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_MINOR_VERSION">1</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_NUM_BSCAN_MASTER_PORTS">0</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_TWO_PRIM_MODE">false</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_USER_SCAN_CHAIN">1</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_USER_SCAN_CHAIN1">1</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_USE_BUFR">0</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_USE_EXT_BSCAN">false</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_USE_STARTUP_CLK">false</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_XSDB_NUM_SLAVES">1</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_XSDB_PERIOD_FRC">0</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_XSDB_PERIOD_INT">10</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Component_Name">dbg_hub_CV</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.ARCHITECTURE">artix7</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BOARD"/>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.DEVICE">xc7a50t</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PACKAGE">ftg256</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PREFHDL">VERILOG</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SILICON_REVISION"/>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SIMULATOR_LANGUAGE">MIXED</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SPEEDGRADE">-2</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.TEMPERATURE_GRADE"/>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_CUSTOMIZATION">TRUE</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_GENERATION">TRUE</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPCACHECRC">a8a3fe0a</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPCACHEID">5366650f24d3a6e9</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPCONTEXT">IP_Unknown</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPREVISION">1</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.MANAGED">TRUE</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.OUTPUTDIR">.</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SELECTEDSIMMODEL"/>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SHAREDDIR">.</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SWVERSION">2016.3</spirit:configurableElementValue>
|
||||
<spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SYNTHESISFLOW">GLOBAL</spirit:configurableElementValue>
|
||||
</spirit:configurableElementValues>
|
||||
</spirit:componentInstance>
|
||||
</spirit:componentInstances>
|
||||
</spirit:design>
|
||||
@ -0,0 +1,42 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<wave_config>
|
||||
<wave_state>
|
||||
</wave_state>
|
||||
<db_ref_list>
|
||||
<db_ref path="/home/dave/misc-projects/rftool-fpga/projects/rx_tx_gen/rx_tx_gen.hw/hw_1/wave/hw_ila_data_1/hw_ila_data_1.wdb" id="1">
|
||||
<top_modules>
|
||||
</top_modules>
|
||||
</db_ref>
|
||||
</db_ref_list>
|
||||
<zoom_setting>
|
||||
<ZoomStartTime time="0fs"></ZoomStartTime>
|
||||
<ZoomEndTime time="4861fs"></ZoomEndTime>
|
||||
<Cursor1Time time="0fs"></Cursor1Time>
|
||||
</zoom_setting>
|
||||
<column_width_setting>
|
||||
<NameColumnWidth column_width="202"></NameColumnWidth>
|
||||
<ValueColumnWidth column_width="216"></ValueColumnWidth>
|
||||
</column_width_setting>
|
||||
<WVObjectSize size="3" />
|
||||
<wvobject type="array" fp_name="siggen_address">
|
||||
<obj_property name="DisplayName">FullPathName</obj_property>
|
||||
<obj_property name="ElementShortName">siggen_address[7:0]</obj_property>
|
||||
<obj_property name="ObjectShortName">siggen_address[7:0]</obj_property>
|
||||
<obj_property name="Radix">HEXRADIX</obj_property>
|
||||
<obj_property name="LABELRADIX">true</obj_property>
|
||||
</wvobject>
|
||||
<wvobject type="array" fp_name="siggen_data">
|
||||
<obj_property name="DisplayName">FullPathName</obj_property>
|
||||
<obj_property name="ElementShortName">siggen_data[31:0]</obj_property>
|
||||
<obj_property name="ObjectShortName">siggen_data[31:0]</obj_property>
|
||||
<obj_property name="Radix">HEXRADIX</obj_property>
|
||||
<obj_property name="LABELRADIX">true</obj_property>
|
||||
</wvobject>
|
||||
<wvobject type="logic" fp_name="sg_probe2">
|
||||
<obj_property name="DisplayName">FullPathName</obj_property>
|
||||
<obj_property name="ElementShortName">sg_probe2</obj_property>
|
||||
<obj_property name="ObjectShortName">sg_probe2</obj_property>
|
||||
<obj_property name="Radix">HEXRADIX</obj_property>
|
||||
<obj_property name="LABELRADIX">true</obj_property>
|
||||
</wvobject>
|
||||
</wave_config>
|
||||
@ -0,0 +1,30 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Mon Dec 12 13:39:07 2016
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_only/rx_only.srcs/sources_1/ip/command_fifo/command_fifo_stub.v
|
||||
// Design : command_fifo
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "fifo_generator_v13_1_2,Vivado 2016.3" *)
|
||||
module command_fifo(wr_clk, rd_clk, din, wr_en, rd_en, dout, full, empty,
|
||||
prog_full, prog_empty)
|
||||
/* synthesis syn_black_box black_box_pad_pin="wr_clk,rd_clk,din[31:0],wr_en,rd_en,dout[7:0],full,empty,prog_full,prog_empty" */;
|
||||
input wr_clk;
|
||||
input rd_clk;
|
||||
input [31:0]din;
|
||||
input wr_en;
|
||||
input rd_en;
|
||||
output [7:0]dout;
|
||||
output full;
|
||||
output empty;
|
||||
output prog_full;
|
||||
output prog_empty;
|
||||
endmodule
|
||||
@ -0,0 +1,23 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Mon Dec 19 16:01:50 2016
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_only/rx_only.srcs/sources_1/ip/ila_0/ila_0_stub.v
|
||||
// Design : ila_0
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "ila,Vivado 2016.3" *)
|
||||
module ila_0(clk, probe0, probe1, probe2)
|
||||
/* synthesis syn_black_box black_box_pad_pin="clk,probe0[7:0],probe1[7:0],probe2[7:0]" */;
|
||||
input clk;
|
||||
input [7:0]probe0;
|
||||
input [7:0]probe1;
|
||||
input [7:0]probe2;
|
||||
endmodule
|
||||
@ -0,0 +1,24 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Mon Dec 19 18:03:04 2016
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_only/rx_only.srcs/sources_1/ip/ila_1/ila_1_stub.v
|
||||
// Design : ila_1
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "ila,Vivado 2016.3" *)
|
||||
module ila_1(clk, probe0, probe1, probe2, probe3)
|
||||
/* synthesis syn_black_box black_box_pad_pin="clk,probe0[0:0],probe1[0:0],probe2[0:0],probe3[0:0]" */;
|
||||
input clk;
|
||||
input [0:0]probe0;
|
||||
input [0:0]probe1;
|
||||
input [0:0]probe2;
|
||||
input [0:0]probe3;
|
||||
endmodule
|
||||
@ -0,0 +1,22 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Thu Dec 22 13:02:56 2016
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_only/rx_only.srcs/sources_1/ip/ila_2/ila_2_stub.v
|
||||
// Design : ila_2
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "ila,Vivado 2016.3" *)
|
||||
module ila_2(clk, probe0, probe1)
|
||||
/* synthesis syn_black_box black_box_pad_pin="clk,probe0[11:0],probe1[11:0]" */;
|
||||
input clk;
|
||||
input [11:0]probe0;
|
||||
input [11:0]probe1;
|
||||
endmodule
|
||||
@ -0,0 +1,27 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Sat Apr 15 09:49:57 2017
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_only/rx_only.srcs/sources_1/ip/iq_sample_fifo/iq_sample_fifo_stub.v
|
||||
// Design : iq_sample_fifo
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "fifo_generator_v13_1_2,Vivado 2016.3" *)
|
||||
module iq_sample_fifo(wr_clk, rd_clk, din, wr_en, rd_en, dout, full, empty)
|
||||
/* synthesis syn_black_box black_box_pad_pin="wr_clk,rd_clk,din[23:0],wr_en,rd_en,dout[23:0],full,empty" */;
|
||||
input wr_clk;
|
||||
input rd_clk;
|
||||
input [23:0]din;
|
||||
input wr_en;
|
||||
input rd_en;
|
||||
output [23:0]dout;
|
||||
output full;
|
||||
output empty;
|
||||
endmodule
|
||||
@ -0,0 +1,29 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Mon Dec 12 13:39:22 2016
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_only/rx_only.srcs/sources_1/ip/response_fifo/response_fifo_stub.v
|
||||
// Design : response_fifo
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "fifo_generator_v13_1_2,Vivado 2016.3" *)
|
||||
module response_fifo(wr_clk, rd_clk, din, wr_en, rd_en, dout, full, empty,
|
||||
prog_empty)
|
||||
/* synthesis syn_black_box black_box_pad_pin="wr_clk,rd_clk,din[7:0],wr_en,rd_en,dout[31:0],full,empty,prog_empty" */;
|
||||
input wr_clk;
|
||||
input rd_clk;
|
||||
input [7:0]din;
|
||||
input wr_en;
|
||||
input rd_en;
|
||||
output [31:0]dout;
|
||||
output full;
|
||||
output empty;
|
||||
output prog_empty;
|
||||
endmodule
|
||||
@ -0,0 +1,29 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Sat Apr 15 09:39:28 2017
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_only/rx_only.srcs/sources_1/ip/rx_packet_fifo/rx_packet_fifo_stub.v
|
||||
// Design : rx_packet_fifo
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "fifo_generator_v13_1_2,Vivado 2016.3" *)
|
||||
module rx_packet_fifo(wr_clk, rd_clk, din, wr_en, rd_en, dout, full, empty,
|
||||
prog_empty)
|
||||
/* synthesis syn_black_box black_box_pad_pin="wr_clk,rd_clk,din[31:0],wr_en,rd_en,dout[31:0],full,empty,prog_empty" */;
|
||||
input wr_clk;
|
||||
input rd_clk;
|
||||
input [31:0]din;
|
||||
input wr_en;
|
||||
input rd_en;
|
||||
output [31:0]dout;
|
||||
output full;
|
||||
output empty;
|
||||
output prog_empty;
|
||||
endmodule
|
||||
@ -0,0 +1,23 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Fri Jun 23 16:51:37 2017
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_tx_gen/rx_tx_gen.srcs/sources_1/ip/sg_ila/sg_ila_stub.v
|
||||
// Design : sg_ila
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
(* x_core_info = "ila,Vivado 2016.3" *)
|
||||
module sg_ila(clk, probe0, probe1, probe2)
|
||||
/* synthesis syn_black_box black_box_pad_pin="clk,probe0[7:0],probe1[31:0],probe2[0:0]" */;
|
||||
input clk;
|
||||
input [7:0]probe0;
|
||||
input [31:0]probe1;
|
||||
input [0:0]probe2;
|
||||
endmodule
|
||||
@ -0,0 +1,20 @@
|
||||
// Copyright 1986-2016 Xilinx, Inc. All Rights Reserved.
|
||||
// --------------------------------------------------------------------------------
|
||||
// Tool Version: Vivado v.2016.3 (lin64) Build 1682563 Mon Oct 10 19:07:26 MDT 2016
|
||||
// Date : Mon Dec 12 14:00:41 2016
|
||||
// Host : david-desktop-arch running 64-bit unknown
|
||||
// Command : write_verilog -force -mode synth_stub
|
||||
// /home/dave/misc-projects/rftool-fpga/projects/rx_only/rx_only.srcs/sources_1/ip/sys_pll/sys_pll_stub.v
|
||||
// Design : sys_pll
|
||||
// Purpose : Stub declaration of top-level module interface
|
||||
// Device : xc7a50tftg256-2
|
||||
// --------------------------------------------------------------------------------
|
||||
|
||||
// This empty module with port declaration file causes synthesis tools to infer a black box for IP.
|
||||
// The synthesis directives are for Synopsys Synplify support to prevent IO buffer insertion.
|
||||
// Please paste the declaration into a Verilog source file or add the file as an additional source.
|
||||
module sys_pll(system_clock, clock_in)
|
||||
/* synthesis syn_black_box black_box_pad_pin="system_clock,clock_in" */;
|
||||
output system_clock;
|
||||
input clock_in;
|
||||
endmodule
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,2 @@
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,5 @@
|
||||
verilog xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/command_fifo/sim/command_fifo.v"
|
||||
|
||||
verilog xil_defaultlib "glbl.v"
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,3 @@
|
||||
vhdl xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/ila_0/sim/ila_0.vhd"
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,3 @@
|
||||
vhdl xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/ila_1/sim/ila_1.vhd"
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,3 @@
|
||||
vhdl xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/ila_2/sim/ila_2.vhd"
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,2 @@
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,5 @@
|
||||
verilog xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/iq_sample_fifo/sim/iq_sample_fifo.v"
|
||||
|
||||
verilog xil_defaultlib "glbl.v"
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,2 @@
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,5 @@
|
||||
verilog xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/response_fifo/sim/response_fifo.v"
|
||||
|
||||
verilog xil_defaultlib "glbl.v"
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,2 @@
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,5 @@
|
||||
verilog xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/rx_packet_fifo/sim/rx_packet_fifo.v"
|
||||
|
||||
verilog xil_defaultlib "glbl.v"
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,3 @@
|
||||
vhdl xil_defaultlib "../../../../rx_tx_gen.srcs/sources_1/ip/sg_ila/sim/sg_ila.vhd"
|
||||
|
||||
nosort
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,12 @@
|
||||
set curr_wave [current_wave_config]
|
||||
if { [string length $curr_wave] == 0 } {
|
||||
if { [llength [get_objects]] > 0} {
|
||||
add_wave /
|
||||
set_property needs_save false [current_wave_config]
|
||||
} else {
|
||||
send_msg_id Add_Wave-1 WARNING "No top level signals found. Simulator will start without a wave window. If you want to open a wave window go to 'File->New Waveform Configuration' or type 'create_wave_config' in the TCL console."
|
||||
}
|
||||
}
|
||||
|
||||
run -all
|
||||
quit
|
||||
@ -0,0 +1,71 @@
|
||||
// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/glbl.v,v 1.14 2010/10/28 20:44:00 fphillip Exp $
|
||||
`ifndef GLBL
|
||||
`define GLBL
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module glbl ();
|
||||
|
||||
parameter ROC_WIDTH = 100000;
|
||||
parameter TOC_WIDTH = 0;
|
||||
|
||||
//-------- STARTUP Globals --------------
|
||||
wire GSR;
|
||||
wire GTS;
|
||||
wire GWE;
|
||||
wire PRLD;
|
||||
tri1 p_up_tmp;
|
||||
tri (weak1, strong0) PLL_LOCKG = p_up_tmp;
|
||||
|
||||
wire PROGB_GLBL;
|
||||
wire CCLKO_GLBL;
|
||||
wire FCSBO_GLBL;
|
||||
wire [3:0] DO_GLBL;
|
||||
wire [3:0] DI_GLBL;
|
||||
|
||||
reg GSR_int;
|
||||
reg GTS_int;
|
||||
reg PRLD_int;
|
||||
|
||||
//-------- JTAG Globals --------------
|
||||
wire JTAG_TDO_GLBL;
|
||||
wire JTAG_TCK_GLBL;
|
||||
wire JTAG_TDI_GLBL;
|
||||
wire JTAG_TMS_GLBL;
|
||||
wire JTAG_TRST_GLBL;
|
||||
|
||||
reg JTAG_CAPTURE_GLBL;
|
||||
reg JTAG_RESET_GLBL;
|
||||
reg JTAG_SHIFT_GLBL;
|
||||
reg JTAG_UPDATE_GLBL;
|
||||
reg JTAG_RUNTEST_GLBL;
|
||||
|
||||
reg JTAG_SEL1_GLBL = 0;
|
||||
reg JTAG_SEL2_GLBL = 0 ;
|
||||
reg JTAG_SEL3_GLBL = 0;
|
||||
reg JTAG_SEL4_GLBL = 0;
|
||||
|
||||
reg JTAG_USER_TDO1_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO2_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO3_GLBL = 1'bz;
|
||||
reg JTAG_USER_TDO4_GLBL = 1'bz;
|
||||
|
||||
assign (weak1, weak0) GSR = GSR_int;
|
||||
assign (weak1, weak0) GTS = GTS_int;
|
||||
assign (weak1, weak0) PRLD = PRLD_int;
|
||||
|
||||
initial begin
|
||||
GSR_int = 1'b1;
|
||||
PRLD_int = 1'b1;
|
||||
#(ROC_WIDTH)
|
||||
GSR_int = 1'b0;
|
||||
PRLD_int = 1'b0;
|
||||
end
|
||||
|
||||
initial begin
|
||||
GTS_int = 1'b1;
|
||||
#(TOC_WIDTH)
|
||||
GTS_int = 1'b0;
|
||||
end
|
||||
|
||||
endmodule
|
||||
`endif
|
||||
@ -0,0 +1,6 @@
|
||||
verilog xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/sys_pll/sys_pll_clk_wiz.v" --include "../../../ipstatic"
|
||||
verilog xil_defaultlib "../../../../rx_only.srcs/sources_1/ip/sys_pll/sys_pll.v" --include "../../../ipstatic"
|
||||
|
||||
verilog xil_defaultlib "glbl.v"
|
||||
|
||||
nosort
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user