600 lines
26 KiB
C
600 lines
26 KiB
C
|
/**
|
||
|
|
@Generated Pin Manager Header File
|
||
|
|
|
||
|
|
@Company:
|
||
|
|
Microchip Technology Inc.
|
||
|
|
|
||
|
|
@File Name:
|
||
|
|
pin_manager.h
|
||
|
|
|
||
|
|
@Summary:
|
||
|
|
This is the Pin Manager file generated using PIC10 / PIC12 / PIC16 / PIC18 MCUs
|
||
|
|
|
||
|
|
@Description
|
||
|
|
This header file provides APIs for driver for .
|
||
|
|
Generation Information :
|
||
|
|
Product Revision : PIC10 / PIC12 / PIC16 / PIC18 MCUs - 1.81.3
|
||
|
|
Device : PIC16F1776
|
||
|
|
Driver Version : 2.11
|
||
|
|
The generated drivers are tested against the following:
|
||
|
|
Compiler : XC8 2.20 and above
|
||
|
|
MPLAB : MPLAB X 5.40
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
(c) 2018 Microchip Technology Inc. and its subsidiaries.
|
||
|
|
|
||
|
|
Subject to your compliance with these terms, you may use Microchip software and any
|
||
|
|
derivatives exclusively with Microchip products. It is your responsibility to comply with third party
|
||
|
|
license terms applicable to your use of third party software (including open source software) that
|
||
|
|
may accompany Microchip software.
|
||
|
|
|
||
|
|
THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER
|
||
|
|
EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY
|
||
|
|
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS
|
||
|
|
FOR A PARTICULAR PURPOSE.
|
||
|
|
|
||
|
|
IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
|
||
|
|
INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND
|
||
|
|
WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP
|
||
|
|
HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO
|
||
|
|
THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL
|
||
|
|
CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT
|
||
|
|
OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS
|
||
|
|
SOFTWARE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef PIN_MANAGER_H
|
||
|
|
#define PIN_MANAGER_H
|
||
|
|
|
||
|
|
/**
|
||
|
|
Section: Included Files
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <xc.h>
|
||
|
|
|
||
|
|
#define INPUT 1
|
||
|
|
#define OUTPUT 0
|
||
|
|
|
||
|
|
#define HIGH 1
|
||
|
|
#define LOW 0
|
||
|
|
|
||
|
|
#define ANALOG 1
|
||
|
|
#define DIGITAL 0
|
||
|
|
|
||
|
|
#define PULL_UP_ENABLED 1
|
||
|
|
#define PULL_UP_DISABLED 0
|
||
|
|
|
||
|
|
// get/set GNDREF_SENSE aliases
|
||
|
|
#define GNDREF_SENSE_TRIS TRISAbits.TRISA0
|
||
|
|
#define GNDREF_SENSE_LAT LATAbits.LATA0
|
||
|
|
#define GNDREF_SENSE_PORT PORTAbits.RA0
|
||
|
|
#define GNDREF_SENSE_WPU WPUAbits.WPUA0
|
||
|
|
#define GNDREF_SENSE_OD ODCONAbits.ODA0
|
||
|
|
#define GNDREF_SENSE_ANS ANSELAbits.ANSA0
|
||
|
|
#define GNDREF_SENSE_SetHigh() do { LATAbits.LATA0 = 1; } while(0)
|
||
|
|
#define GNDREF_SENSE_SetLow() do { LATAbits.LATA0 = 0; } while(0)
|
||
|
|
#define GNDREF_SENSE_Toggle() do { LATAbits.LATA0 = ~LATAbits.LATA0; } while(0)
|
||
|
|
#define GNDREF_SENSE_GetValue() PORTAbits.RA0
|
||
|
|
#define GNDREF_SENSE_SetDigitalInput() do { TRISAbits.TRISA0 = 1; } while(0)
|
||
|
|
#define GNDREF_SENSE_SetDigitalOutput() do { TRISAbits.TRISA0 = 0; } while(0)
|
||
|
|
#define GNDREF_SENSE_SetPullup() do { WPUAbits.WPUA0 = 1; } while(0)
|
||
|
|
#define GNDREF_SENSE_ResetPullup() do { WPUAbits.WPUA0 = 0; } while(0)
|
||
|
|
#define GNDREF_SENSE_SetPushPull() do { ODCONAbits.ODA0 = 0; } while(0)
|
||
|
|
#define GNDREF_SENSE_SetOpenDrain() do { ODCONAbits.ODA0 = 1; } while(0)
|
||
|
|
#define GNDREF_SENSE_SetAnalogMode() do { ANSELAbits.ANSA0 = 1; } while(0)
|
||
|
|
#define GNDREF_SENSE_SetDigitalMode() do { ANSELAbits.ANSA0 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RA1 procedures
|
||
|
|
#define RA1_SetHigh() do { LATAbits.LATA1 = 1; } while(0)
|
||
|
|
#define RA1_SetLow() do { LATAbits.LATA1 = 0; } while(0)
|
||
|
|
#define RA1_Toggle() do { LATAbits.LATA1 = ~LATAbits.LATA1; } while(0)
|
||
|
|
#define RA1_GetValue() PORTAbits.RA1
|
||
|
|
#define RA1_SetDigitalInput() do { TRISAbits.TRISA1 = 1; } while(0)
|
||
|
|
#define RA1_SetDigitalOutput() do { TRISAbits.TRISA1 = 0; } while(0)
|
||
|
|
#define RA1_SetPullup() do { WPUAbits.WPUA1 = 1; } while(0)
|
||
|
|
#define RA1_ResetPullup() do { WPUAbits.WPUA1 = 0; } while(0)
|
||
|
|
#define RA1_SetAnalogMode() do { ANSELAbits.ANSA1 = 1; } while(0)
|
||
|
|
#define RA1_SetDigitalMode() do { ANSELAbits.ANSA1 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RA2 procedures
|
||
|
|
#define RA2_SetHigh() do { LATAbits.LATA2 = 1; } while(0)
|
||
|
|
#define RA2_SetLow() do { LATAbits.LATA2 = 0; } while(0)
|
||
|
|
#define RA2_Toggle() do { LATAbits.LATA2 = ~LATAbits.LATA2; } while(0)
|
||
|
|
#define RA2_GetValue() PORTAbits.RA2
|
||
|
|
#define RA2_SetDigitalInput() do { TRISAbits.TRISA2 = 1; } while(0)
|
||
|
|
#define RA2_SetDigitalOutput() do { TRISAbits.TRISA2 = 0; } while(0)
|
||
|
|
#define RA2_SetPullup() do { WPUAbits.WPUA2 = 1; } while(0)
|
||
|
|
#define RA2_ResetPullup() do { WPUAbits.WPUA2 = 0; } while(0)
|
||
|
|
#define RA2_SetAnalogMode() do { ANSELAbits.ANSA2 = 1; } while(0)
|
||
|
|
#define RA2_SetDigitalMode() do { ANSELAbits.ANSA2 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RA4 procedures
|
||
|
|
#define RA4_SetHigh() do { LATAbits.LATA4 = 1; } while(0)
|
||
|
|
#define RA4_SetLow() do { LATAbits.LATA4 = 0; } while(0)
|
||
|
|
#define RA4_Toggle() do { LATAbits.LATA4 = ~LATAbits.LATA4; } while(0)
|
||
|
|
#define RA4_GetValue() PORTAbits.RA4
|
||
|
|
#define RA4_SetDigitalInput() do { TRISAbits.TRISA4 = 1; } while(0)
|
||
|
|
#define RA4_SetDigitalOutput() do { TRISAbits.TRISA4 = 0; } while(0)
|
||
|
|
#define RA4_SetPullup() do { WPUAbits.WPUA4 = 1; } while(0)
|
||
|
|
#define RA4_ResetPullup() do { WPUAbits.WPUA4 = 0; } while(0)
|
||
|
|
#define RA4_SetAnalogMode() do { ANSELAbits.ANSA4 = 1; } while(0)
|
||
|
|
#define RA4_SetDigitalMode() do { ANSELAbits.ANSA4 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RA5 procedures
|
||
|
|
#define RA5_SetHigh() do { LATAbits.LATA5 = 1; } while(0)
|
||
|
|
#define RA5_SetLow() do { LATAbits.LATA5 = 0; } while(0)
|
||
|
|
#define RA5_Toggle() do { LATAbits.LATA5 = ~LATAbits.LATA5; } while(0)
|
||
|
|
#define RA5_GetValue() PORTAbits.RA5
|
||
|
|
#define RA5_SetDigitalInput() do { TRISAbits.TRISA5 = 1; } while(0)
|
||
|
|
#define RA5_SetDigitalOutput() do { TRISAbits.TRISA5 = 0; } while(0)
|
||
|
|
#define RA5_SetPullup() do { WPUAbits.WPUA5 = 1; } while(0)
|
||
|
|
#define RA5_ResetPullup() do { WPUAbits.WPUA5 = 0; } while(0)
|
||
|
|
#define RA5_SetAnalogMode() do { ANSELAbits.ANSA5 = 1; } while(0)
|
||
|
|
#define RA5_SetDigitalMode() do { ANSELAbits.ANSA5 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set SR aliases
|
||
|
|
#define SR_TRIS TRISAbits.TRISA6
|
||
|
|
#define SR_LAT LATAbits.LATA6
|
||
|
|
#define SR_PORT PORTAbits.RA6
|
||
|
|
#define SR_WPU WPUAbits.WPUA6
|
||
|
|
#define SR_OD ODCONAbits.ODA6
|
||
|
|
#define SR_SetHigh() do { LATAbits.LATA6 = 1; } while(0)
|
||
|
|
#define SR_SetLow() do { LATAbits.LATA6 = 0; } while(0)
|
||
|
|
#define SR_Toggle() do { LATAbits.LATA6 = ~LATAbits.LATA6; } while(0)
|
||
|
|
#define SR_GetValue() PORTAbits.RA6
|
||
|
|
#define SR_SetDigitalInput() do { TRISAbits.TRISA6 = 1; } while(0)
|
||
|
|
#define SR_SetDigitalOutput() do { TRISAbits.TRISA6 = 0; } while(0)
|
||
|
|
#define SR_SetPullup() do { WPUAbits.WPUA6 = 1; } while(0)
|
||
|
|
#define SR_ResetPullup() do { WPUAbits.WPUA6 = 0; } while(0)
|
||
|
|
#define SR_SetPushPull() do { ODCONAbits.ODA6 = 0; } while(0)
|
||
|
|
#define SR_SetOpenDrain() do { ODCONAbits.ODA6 = 1; } while(0)
|
||
|
|
|
||
|
|
// get/set MUX_SEL1 aliases
|
||
|
|
#define MUX_SEL1_TRIS TRISAbits.TRISA7
|
||
|
|
#define MUX_SEL1_LAT LATAbits.LATA7
|
||
|
|
#define MUX_SEL1_PORT PORTAbits.RA7
|
||
|
|
#define MUX_SEL1_WPU WPUAbits.WPUA7
|
||
|
|
#define MUX_SEL1_OD ODCONAbits.ODA7
|
||
|
|
#define MUX_SEL1_SetHigh() do { LATAbits.LATA7 = 1; } while(0)
|
||
|
|
#define MUX_SEL1_SetLow() do { LATAbits.LATA7 = 0; } while(0)
|
||
|
|
#define MUX_SEL1_Toggle() do { LATAbits.LATA7 = ~LATAbits.LATA7; } while(0)
|
||
|
|
#define MUX_SEL1_GetValue() PORTAbits.RA7
|
||
|
|
#define MUX_SEL1_SetDigitalInput() do { TRISAbits.TRISA7 = 1; } while(0)
|
||
|
|
#define MUX_SEL1_SetDigitalOutput() do { TRISAbits.TRISA7 = 0; } while(0)
|
||
|
|
#define MUX_SEL1_SetPullup() do { WPUAbits.WPUA7 = 1; } while(0)
|
||
|
|
#define MUX_SEL1_ResetPullup() do { WPUAbits.WPUA7 = 0; } while(0)
|
||
|
|
#define MUX_SEL1_SetPushPull() do { ODCONAbits.ODA7 = 0; } while(0)
|
||
|
|
#define MUX_SEL1_SetOpenDrain() do { ODCONAbits.ODA7 = 1; } while(0)
|
||
|
|
|
||
|
|
// get/set SW2 aliases
|
||
|
|
#define SW2_TRIS TRISBbits.TRISB0
|
||
|
|
#define SW2_LAT LATBbits.LATB0
|
||
|
|
#define SW2_PORT PORTBbits.RB0
|
||
|
|
#define SW2_WPU WPUBbits.WPUB0
|
||
|
|
#define SW2_ANS ANSELBbits.ANSB0
|
||
|
|
#define SW2_SetHigh() do { LATBbits.LATB0 = 1; } while(0)
|
||
|
|
#define SW2_SetLow() do { LATBbits.LATB0 = 0; } while(0)
|
||
|
|
#define SW2_Toggle() do { LATBbits.LATB0 = ~LATBbits.LATB0; } while(0)
|
||
|
|
#define SW2_GetValue() PORTBbits.RB0
|
||
|
|
#define SW2_SetDigitalInput() do { TRISBbits.TRISB0 = 1; } while(0)
|
||
|
|
#define SW2_SetDigitalOutput() do { TRISBbits.TRISB0 = 0; } while(0)
|
||
|
|
#define SW2_SetPullup() do { WPUBbits.WPUB0 = 1; } while(0)
|
||
|
|
#define SW2_ResetPullup() do { WPUBbits.WPUB0 = 0; } while(0)
|
||
|
|
#define SW2_SetAnalogMode() do { ANSELBbits.ANSB0 = 1; } while(0)
|
||
|
|
#define SW2_SetDigitalMode() do { ANSELBbits.ANSB0 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RB1 procedures
|
||
|
|
#define RB1_SetHigh() do { LATBbits.LATB1 = 1; } while(0)
|
||
|
|
#define RB1_SetLow() do { LATBbits.LATB1 = 0; } while(0)
|
||
|
|
#define RB1_Toggle() do { LATBbits.LATB1 = ~LATBbits.LATB1; } while(0)
|
||
|
|
#define RB1_GetValue() PORTBbits.RB1
|
||
|
|
#define RB1_SetDigitalInput() do { TRISBbits.TRISB1 = 1; } while(0)
|
||
|
|
#define RB1_SetDigitalOutput() do { TRISBbits.TRISB1 = 0; } while(0)
|
||
|
|
#define RB1_SetPullup() do { WPUBbits.WPUB1 = 1; } while(0)
|
||
|
|
#define RB1_ResetPullup() do { WPUBbits.WPUB1 = 0; } while(0)
|
||
|
|
#define RB1_SetAnalogMode() do { ANSELBbits.ANSB1 = 1; } while(0)
|
||
|
|
#define RB1_SetDigitalMode() do { ANSELBbits.ANSB1 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RB2 procedures
|
||
|
|
#define RB2_SetHigh() do { LATBbits.LATB2 = 1; } while(0)
|
||
|
|
#define RB2_SetLow() do { LATBbits.LATB2 = 0; } while(0)
|
||
|
|
#define RB2_Toggle() do { LATBbits.LATB2 = ~LATBbits.LATB2; } while(0)
|
||
|
|
#define RB2_GetValue() PORTBbits.RB2
|
||
|
|
#define RB2_SetDigitalInput() do { TRISBbits.TRISB2 = 1; } while(0)
|
||
|
|
#define RB2_SetDigitalOutput() do { TRISBbits.TRISB2 = 0; } while(0)
|
||
|
|
#define RB2_SetPullup() do { WPUBbits.WPUB2 = 1; } while(0)
|
||
|
|
#define RB2_ResetPullup() do { WPUBbits.WPUB2 = 0; } while(0)
|
||
|
|
#define RB2_SetAnalogMode() do { ANSELBbits.ANSB2 = 1; } while(0)
|
||
|
|
#define RB2_SetDigitalMode() do { ANSELBbits.ANSB2 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RB3 procedures
|
||
|
|
#define RB3_SetHigh() do { LATBbits.LATB3 = 1; } while(0)
|
||
|
|
#define RB3_SetLow() do { LATBbits.LATB3 = 0; } while(0)
|
||
|
|
#define RB3_Toggle() do { LATBbits.LATB3 = ~LATBbits.LATB3; } while(0)
|
||
|
|
#define RB3_GetValue() PORTBbits.RB3
|
||
|
|
#define RB3_SetDigitalInput() do { TRISBbits.TRISB3 = 1; } while(0)
|
||
|
|
#define RB3_SetDigitalOutput() do { TRISBbits.TRISB3 = 0; } while(0)
|
||
|
|
#define RB3_SetPullup() do { WPUBbits.WPUB3 = 1; } while(0)
|
||
|
|
#define RB3_ResetPullup() do { WPUBbits.WPUB3 = 0; } while(0)
|
||
|
|
#define RB3_SetAnalogMode() do { ANSELBbits.ANSB3 = 1; } while(0)
|
||
|
|
#define RB3_SetDigitalMode() do { ANSELBbits.ANSB3 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set MUX_SEL2 aliases
|
||
|
|
#define MUX_SEL2_TRIS TRISBbits.TRISB4
|
||
|
|
#define MUX_SEL2_LAT LATBbits.LATB4
|
||
|
|
#define MUX_SEL2_PORT PORTBbits.RB4
|
||
|
|
#define MUX_SEL2_WPU WPUBbits.WPUB4
|
||
|
|
#define MUX_SEL2_OD ODCONBbits.ODB4
|
||
|
|
#define MUX_SEL2_ANS ANSELBbits.ANSB4
|
||
|
|
#define MUX_SEL2_SetHigh() do { LATBbits.LATB4 = 1; } while(0)
|
||
|
|
#define MUX_SEL2_SetLow() do { LATBbits.LATB4 = 0; } while(0)
|
||
|
|
#define MUX_SEL2_Toggle() do { LATBbits.LATB4 = ~LATBbits.LATB4; } while(0)
|
||
|
|
#define MUX_SEL2_GetValue() PORTBbits.RB4
|
||
|
|
#define MUX_SEL2_SetDigitalInput() do { TRISBbits.TRISB4 = 1; } while(0)
|
||
|
|
#define MUX_SEL2_SetDigitalOutput() do { TRISBbits.TRISB4 = 0; } while(0)
|
||
|
|
#define MUX_SEL2_SetPullup() do { WPUBbits.WPUB4 = 1; } while(0)
|
||
|
|
#define MUX_SEL2_ResetPullup() do { WPUBbits.WPUB4 = 0; } while(0)
|
||
|
|
#define MUX_SEL2_SetPushPull() do { ODCONBbits.ODB4 = 0; } while(0)
|
||
|
|
#define MUX_SEL2_SetOpenDrain() do { ODCONBbits.ODB4 = 1; } while(0)
|
||
|
|
#define MUX_SEL2_SetAnalogMode() do { ANSELBbits.ANSB4 = 1; } while(0)
|
||
|
|
#define MUX_SEL2_SetDigitalMode() do { ANSELBbits.ANSB4 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set VIN_SENSE aliases
|
||
|
|
#define VIN_SENSE_TRIS TRISBbits.TRISB5
|
||
|
|
#define VIN_SENSE_LAT LATBbits.LATB5
|
||
|
|
#define VIN_SENSE_PORT PORTBbits.RB5
|
||
|
|
#define VIN_SENSE_WPU WPUBbits.WPUB5
|
||
|
|
#define VIN_SENSE_OD ODCONBbits.ODB5
|
||
|
|
#define VIN_SENSE_ANS ANSELBbits.ANSB5
|
||
|
|
#define VIN_SENSE_SetHigh() do { LATBbits.LATB5 = 1; } while(0)
|
||
|
|
#define VIN_SENSE_SetLow() do { LATBbits.LATB5 = 0; } while(0)
|
||
|
|
#define VIN_SENSE_Toggle() do { LATBbits.LATB5 = ~LATBbits.LATB5; } while(0)
|
||
|
|
#define VIN_SENSE_GetValue() PORTBbits.RB5
|
||
|
|
#define VIN_SENSE_SetDigitalInput() do { TRISBbits.TRISB5 = 1; } while(0)
|
||
|
|
#define VIN_SENSE_SetDigitalOutput() do { TRISBbits.TRISB5 = 0; } while(0)
|
||
|
|
#define VIN_SENSE_SetPullup() do { WPUBbits.WPUB5 = 1; } while(0)
|
||
|
|
#define VIN_SENSE_ResetPullup() do { WPUBbits.WPUB5 = 0; } while(0)
|
||
|
|
#define VIN_SENSE_SetPushPull() do { ODCONBbits.ODB5 = 0; } while(0)
|
||
|
|
#define VIN_SENSE_SetOpenDrain() do { ODCONBbits.ODB5 = 1; } while(0)
|
||
|
|
#define VIN_SENSE_SetAnalogMode() do { ANSELBbits.ANSB5 = 1; } while(0)
|
||
|
|
#define VIN_SENSE_SetDigitalMode() do { ANSELBbits.ANSB5 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RC0 procedures
|
||
|
|
#define RC0_SetHigh() do { LATCbits.LATC0 = 1; } while(0)
|
||
|
|
#define RC0_SetLow() do { LATCbits.LATC0 = 0; } while(0)
|
||
|
|
#define RC0_Toggle() do { LATCbits.LATC0 = ~LATCbits.LATC0; } while(0)
|
||
|
|
#define RC0_GetValue() PORTCbits.RC0
|
||
|
|
#define RC0_SetDigitalInput() do { TRISCbits.TRISC0 = 1; } while(0)
|
||
|
|
#define RC0_SetDigitalOutput() do { TRISCbits.TRISC0 = 0; } while(0)
|
||
|
|
#define RC0_SetPullup() do { WPUCbits.WPUC0 = 1; } while(0)
|
||
|
|
#define RC0_ResetPullup() do { WPUCbits.WPUC0 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set RC1 procedures
|
||
|
|
#define RC1_SetHigh() do { LATCbits.LATC1 = 1; } while(0)
|
||
|
|
#define RC1_SetLow() do { LATCbits.LATC1 = 0; } while(0)
|
||
|
|
#define RC1_Toggle() do { LATCbits.LATC1 = ~LATCbits.LATC1; } while(0)
|
||
|
|
#define RC1_GetValue() PORTCbits.RC1
|
||
|
|
#define RC1_SetDigitalInput() do { TRISCbits.TRISC1 = 1; } while(0)
|
||
|
|
#define RC1_SetDigitalOutput() do { TRISCbits.TRISC1 = 0; } while(0)
|
||
|
|
#define RC1_SetPullup() do { WPUCbits.WPUC1 = 1; } while(0)
|
||
|
|
#define RC1_ResetPullup() do { WPUCbits.WPUC1 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set STAGE2_MON aliases
|
||
|
|
#define STAGE2_MON_TRIS TRISCbits.TRISC2
|
||
|
|
#define STAGE2_MON_LAT LATCbits.LATC2
|
||
|
|
#define STAGE2_MON_PORT PORTCbits.RC2
|
||
|
|
#define STAGE2_MON_WPU WPUCbits.WPUC2
|
||
|
|
#define STAGE2_MON_OD ODCONCbits.ODC2
|
||
|
|
#define STAGE2_MON_ANS ANSELCbits.ANSC2
|
||
|
|
#define STAGE2_MON_SetHigh() do { LATCbits.LATC2 = 1; } while(0)
|
||
|
|
#define STAGE2_MON_SetLow() do { LATCbits.LATC2 = 0; } while(0)
|
||
|
|
#define STAGE2_MON_Toggle() do { LATCbits.LATC2 = ~LATCbits.LATC2; } while(0)
|
||
|
|
#define STAGE2_MON_GetValue() PORTCbits.RC2
|
||
|
|
#define STAGE2_MON_SetDigitalInput() do { TRISCbits.TRISC2 = 1; } while(0)
|
||
|
|
#define STAGE2_MON_SetDigitalOutput() do { TRISCbits.TRISC2 = 0; } while(0)
|
||
|
|
#define STAGE2_MON_SetPullup() do { WPUCbits.WPUC2 = 1; } while(0)
|
||
|
|
#define STAGE2_MON_ResetPullup() do { WPUCbits.WPUC2 = 0; } while(0)
|
||
|
|
#define STAGE2_MON_SetPushPull() do { ODCONCbits.ODC2 = 0; } while(0)
|
||
|
|
#define STAGE2_MON_SetOpenDrain() do { ODCONCbits.ODC2 = 1; } while(0)
|
||
|
|
#define STAGE2_MON_SetAnalogMode() do { ANSELCbits.ANSC2 = 1; } while(0)
|
||
|
|
#define STAGE2_MON_SetDigitalMode() do { ANSELCbits.ANSC2 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set STAGE1_MON aliases
|
||
|
|
#define STAGE1_MON_TRIS TRISCbits.TRISC3
|
||
|
|
#define STAGE1_MON_LAT LATCbits.LATC3
|
||
|
|
#define STAGE1_MON_PORT PORTCbits.RC3
|
||
|
|
#define STAGE1_MON_WPU WPUCbits.WPUC3
|
||
|
|
#define STAGE1_MON_OD ODCONCbits.ODC3
|
||
|
|
#define STAGE1_MON_ANS ANSELCbits.ANSC3
|
||
|
|
#define STAGE1_MON_SetHigh() do { LATCbits.LATC3 = 1; } while(0)
|
||
|
|
#define STAGE1_MON_SetLow() do { LATCbits.LATC3 = 0; } while(0)
|
||
|
|
#define STAGE1_MON_Toggle() do { LATCbits.LATC3 = ~LATCbits.LATC3; } while(0)
|
||
|
|
#define STAGE1_MON_GetValue() PORTCbits.RC3
|
||
|
|
#define STAGE1_MON_SetDigitalInput() do { TRISCbits.TRISC3 = 1; } while(0)
|
||
|
|
#define STAGE1_MON_SetDigitalOutput() do { TRISCbits.TRISC3 = 0; } while(0)
|
||
|
|
#define STAGE1_MON_SetPullup() do { WPUCbits.WPUC3 = 1; } while(0)
|
||
|
|
#define STAGE1_MON_ResetPullup() do { WPUCbits.WPUC3 = 0; } while(0)
|
||
|
|
#define STAGE1_MON_SetPushPull() do { ODCONCbits.ODC3 = 0; } while(0)
|
||
|
|
#define STAGE1_MON_SetOpenDrain() do { ODCONCbits.ODC3 = 1; } while(0)
|
||
|
|
#define STAGE1_MON_SetAnalogMode() do { ANSELCbits.ANSC3 = 1; } while(0)
|
||
|
|
#define STAGE1_MON_SetDigitalMode() do { ANSELCbits.ANSC3 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set LED_R aliases
|
||
|
|
#define LED_R_TRIS TRISCbits.TRISC4
|
||
|
|
#define LED_R_LAT LATCbits.LATC4
|
||
|
|
#define LED_R_PORT PORTCbits.RC4
|
||
|
|
#define LED_R_WPU WPUCbits.WPUC4
|
||
|
|
#define LED_R_OD ODCONCbits.ODC4
|
||
|
|
#define LED_R_ANS ANSELCbits.ANSC4
|
||
|
|
#define LED_R_SetHigh() do { LATCbits.LATC4 = 1; } while(0)
|
||
|
|
#define LED_R_SetLow() do { LATCbits.LATC4 = 0; } while(0)
|
||
|
|
#define LED_R_Toggle() do { LATCbits.LATC4 = ~LATCbits.LATC4; } while(0)
|
||
|
|
#define LED_R_GetValue() PORTCbits.RC4
|
||
|
|
#define LED_R_SetDigitalInput() do { TRISCbits.TRISC4 = 1; } while(0)
|
||
|
|
#define LED_R_SetDigitalOutput() do { TRISCbits.TRISC4 = 0; } while(0)
|
||
|
|
#define LED_R_SetPullup() do { WPUCbits.WPUC4 = 1; } while(0)
|
||
|
|
#define LED_R_ResetPullup() do { WPUCbits.WPUC4 = 0; } while(0)
|
||
|
|
#define LED_R_SetPushPull() do { ODCONCbits.ODC4 = 0; } while(0)
|
||
|
|
#define LED_R_SetOpenDrain() do { ODCONCbits.ODC4 = 1; } while(0)
|
||
|
|
#define LED_R_SetAnalogMode() do { ANSELCbits.ANSC4 = 1; } while(0)
|
||
|
|
#define LED_R_SetDigitalMode() do { ANSELCbits.ANSC4 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set LED_G aliases
|
||
|
|
#define LED_G_TRIS TRISCbits.TRISC5
|
||
|
|
#define LED_G_LAT LATCbits.LATC5
|
||
|
|
#define LED_G_PORT PORTCbits.RC5
|
||
|
|
#define LED_G_WPU WPUCbits.WPUC5
|
||
|
|
#define LED_G_OD ODCONCbits.ODC5
|
||
|
|
#define LED_G_ANS ANSELCbits.ANSC5
|
||
|
|
#define LED_G_SetHigh() do { LATCbits.LATC5 = 1; } while(0)
|
||
|
|
#define LED_G_SetLow() do { LATCbits.LATC5 = 0; } while(0)
|
||
|
|
#define LED_G_Toggle() do { LATCbits.LATC5 = ~LATCbits.LATC5; } while(0)
|
||
|
|
#define LED_G_GetValue() PORTCbits.RC5
|
||
|
|
#define LED_G_SetDigitalInput() do { TRISCbits.TRISC5 = 1; } while(0)
|
||
|
|
#define LED_G_SetDigitalOutput() do { TRISCbits.TRISC5 = 0; } while(0)
|
||
|
|
#define LED_G_SetPullup() do { WPUCbits.WPUC5 = 1; } while(0)
|
||
|
|
#define LED_G_ResetPullup() do { WPUCbits.WPUC5 = 0; } while(0)
|
||
|
|
#define LED_G_SetPushPull() do { ODCONCbits.ODC5 = 0; } while(0)
|
||
|
|
#define LED_G_SetOpenDrain() do { ODCONCbits.ODC5 = 1; } while(0)
|
||
|
|
#define LED_G_SetAnalogMode() do { ANSELCbits.ANSC5 = 1; } while(0)
|
||
|
|
#define LED_G_SetDigitalMode() do { ANSELCbits.ANSC5 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set LED_B aliases
|
||
|
|
#define LED_B_TRIS TRISCbits.TRISC6
|
||
|
|
#define LED_B_LAT LATCbits.LATC6
|
||
|
|
#define LED_B_PORT PORTCbits.RC6
|
||
|
|
#define LED_B_WPU WPUCbits.WPUC6
|
||
|
|
#define LED_B_OD ODCONCbits.ODC6
|
||
|
|
#define LED_B_ANS ANSELCbits.ANSC6
|
||
|
|
#define LED_B_SetHigh() do { LATCbits.LATC6 = 1; } while(0)
|
||
|
|
#define LED_B_SetLow() do { LATCbits.LATC6 = 0; } while(0)
|
||
|
|
#define LED_B_Toggle() do { LATCbits.LATC6 = ~LATCbits.LATC6; } while(0)
|
||
|
|
#define LED_B_GetValue() PORTCbits.RC6
|
||
|
|
#define LED_B_SetDigitalInput() do { TRISCbits.TRISC6 = 1; } while(0)
|
||
|
|
#define LED_B_SetDigitalOutput() do { TRISCbits.TRISC6 = 0; } while(0)
|
||
|
|
#define LED_B_SetPullup() do { WPUCbits.WPUC6 = 1; } while(0)
|
||
|
|
#define LED_B_ResetPullup() do { WPUCbits.WPUC6 = 0; } while(0)
|
||
|
|
#define LED_B_SetPushPull() do { ODCONCbits.ODC6 = 0; } while(0)
|
||
|
|
#define LED_B_SetOpenDrain() do { ODCONCbits.ODC6 = 1; } while(0)
|
||
|
|
#define LED_B_SetAnalogMode() do { ANSELCbits.ANSC6 = 1; } while(0)
|
||
|
|
#define LED_B_SetDigitalMode() do { ANSELCbits.ANSC6 = 0; } while(0)
|
||
|
|
|
||
|
|
// get/set SW1 aliases
|
||
|
|
#define SW1_TRIS TRISCbits.TRISC7
|
||
|
|
#define SW1_LAT LATCbits.LATC7
|
||
|
|
#define SW1_PORT PORTCbits.RC7
|
||
|
|
#define SW1_WPU WPUCbits.WPUC7
|
||
|
|
#define SW1_OD ODCONCbits.ODC7
|
||
|
|
#define SW1_ANS ANSELCbits.ANSC7
|
||
|
|
#define SW1_SetHigh() do { LATCbits.LATC7 = 1; } while(0)
|
||
|
|
#define SW1_SetLow() do { LATCbits.LATC7 = 0; } while(0)
|
||
|
|
#define SW1_Toggle() do { LATCbits.LATC7 = ~LATCbits.LATC7; } while(0)
|
||
|
|
#define SW1_GetValue() PORTCbits.RC7
|
||
|
|
#define SW1_SetDigitalInput() do { TRISCbits.TRISC7 = 1; } while(0)
|
||
|
|
#define SW1_SetDigitalOutput() do { TRISCbits.TRISC7 = 0; } while(0)
|
||
|
|
#define SW1_SetPullup() do { WPUCbits.WPUC7 = 1; } while(0)
|
||
|
|
#define SW1_ResetPullup() do { WPUCbits.WPUC7 = 0; } while(0)
|
||
|
|
#define SW1_SetPushPull() do { ODCONCbits.ODC7 = 0; } while(0)
|
||
|
|
#define SW1_SetOpenDrain() do { ODCONCbits.ODC7 = 1; } while(0)
|
||
|
|
#define SW1_SetAnalogMode() do { ANSELCbits.ANSC7 = 1; } while(0)
|
||
|
|
#define SW1_SetDigitalMode() do { ANSELCbits.ANSC7 = 0; } while(0)
|
||
|
|
|
||
|
|
/**
|
||
|
|
@Param
|
||
|
|
none
|
||
|
|
@Returns
|
||
|
|
none
|
||
|
|
@Description
|
||
|
|
GPIO and peripheral I/O initialization
|
||
|
|
@Example
|
||
|
|
PIN_MANAGER_Initialize();
|
||
|
|
*/
|
||
|
|
void PIN_MANAGER_Initialize (void);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @Param
|
||
|
|
none
|
||
|
|
* @Returns
|
||
|
|
none
|
||
|
|
* @Description
|
||
|
|
Interrupt on Change Handling routine
|
||
|
|
* @Example
|
||
|
|
PIN_MANAGER_IOC();
|
||
|
|
*/
|
||
|
|
void PIN_MANAGER_IOC(void);
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @Param
|
||
|
|
none
|
||
|
|
* @Returns
|
||
|
|
none
|
||
|
|
* @Description
|
||
|
|
Interrupt on Change Handler for the IOCBF0 pin functionality
|
||
|
|
* @Example
|
||
|
|
IOCBF0_ISR();
|
||
|
|
*/
|
||
|
|
void IOCBF0_ISR(void);
|
||
|
|
|
||
|
|
/**
|
||
|
|
@Summary
|
||
|
|
Interrupt Handler Setter for IOCBF0 pin interrupt-on-change functionality
|
||
|
|
|
||
|
|
@Description
|
||
|
|
Allows selecting an interrupt handler for IOCBF0 at application runtime
|
||
|
|
|
||
|
|
@Preconditions
|
||
|
|
Pin Manager intializer called
|
||
|
|
|
||
|
|
@Returns
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Param
|
||
|
|
InterruptHandler function pointer.
|
||
|
|
|
||
|
|
@Example
|
||
|
|
PIN_MANAGER_Initialize();
|
||
|
|
IOCBF0_SetInterruptHandler(MyInterruptHandler);
|
||
|
|
|
||
|
|
*/
|
||
|
|
void IOCBF0_SetInterruptHandler(void (* InterruptHandler)(void));
|
||
|
|
|
||
|
|
/**
|
||
|
|
@Summary
|
||
|
|
Dynamic Interrupt Handler for IOCBF0 pin
|
||
|
|
|
||
|
|
@Description
|
||
|
|
This is a dynamic interrupt handler to be used together with the IOCBF0_SetInterruptHandler() method.
|
||
|
|
This handler is called every time the IOCBF0 ISR is executed and allows any function to be registered at runtime.
|
||
|
|
|
||
|
|
@Preconditions
|
||
|
|
Pin Manager intializer called
|
||
|
|
|
||
|
|
@Returns
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Param
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Example
|
||
|
|
PIN_MANAGER_Initialize();
|
||
|
|
IOCBF0_SetInterruptHandler(IOCBF0_InterruptHandler);
|
||
|
|
|
||
|
|
*/
|
||
|
|
extern void (*IOCBF0_InterruptHandler)(void);
|
||
|
|
|
||
|
|
/**
|
||
|
|
@Summary
|
||
|
|
Default Interrupt Handler for IOCBF0 pin
|
||
|
|
|
||
|
|
@Description
|
||
|
|
This is a predefined interrupt handler to be used together with the IOCBF0_SetInterruptHandler() method.
|
||
|
|
This handler is called every time the IOCBF0 ISR is executed.
|
||
|
|
|
||
|
|
@Preconditions
|
||
|
|
Pin Manager intializer called
|
||
|
|
|
||
|
|
@Returns
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Param
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Example
|
||
|
|
PIN_MANAGER_Initialize();
|
||
|
|
IOCBF0_SetInterruptHandler(IOCBF0_DefaultInterruptHandler);
|
||
|
|
|
||
|
|
*/
|
||
|
|
void IOCBF0_DefaultInterruptHandler(void);
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @Param
|
||
|
|
none
|
||
|
|
* @Returns
|
||
|
|
none
|
||
|
|
* @Description
|
||
|
|
Interrupt on Change Handler for the IOCCF7 pin functionality
|
||
|
|
* @Example
|
||
|
|
IOCCF7_ISR();
|
||
|
|
*/
|
||
|
|
void IOCCF7_ISR(void);
|
||
|
|
|
||
|
|
/**
|
||
|
|
@Summary
|
||
|
|
Interrupt Handler Setter for IOCCF7 pin interrupt-on-change functionality
|
||
|
|
|
||
|
|
@Description
|
||
|
|
Allows selecting an interrupt handler for IOCCF7 at application runtime
|
||
|
|
|
||
|
|
@Preconditions
|
||
|
|
Pin Manager intializer called
|
||
|
|
|
||
|
|
@Returns
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Param
|
||
|
|
InterruptHandler function pointer.
|
||
|
|
|
||
|
|
@Example
|
||
|
|
PIN_MANAGER_Initialize();
|
||
|
|
IOCCF7_SetInterruptHandler(MyInterruptHandler);
|
||
|
|
|
||
|
|
*/
|
||
|
|
void IOCCF7_SetInterruptHandler(void (* InterruptHandler)(void));
|
||
|
|
|
||
|
|
/**
|
||
|
|
@Summary
|
||
|
|
Dynamic Interrupt Handler for IOCCF7 pin
|
||
|
|
|
||
|
|
@Description
|
||
|
|
This is a dynamic interrupt handler to be used together with the IOCCF7_SetInterruptHandler() method.
|
||
|
|
This handler is called every time the IOCCF7 ISR is executed and allows any function to be registered at runtime.
|
||
|
|
|
||
|
|
@Preconditions
|
||
|
|
Pin Manager intializer called
|
||
|
|
|
||
|
|
@Returns
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Param
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Example
|
||
|
|
PIN_MANAGER_Initialize();
|
||
|
|
IOCCF7_SetInterruptHandler(IOCCF7_InterruptHandler);
|
||
|
|
|
||
|
|
*/
|
||
|
|
extern void (*IOCCF7_InterruptHandler)(void);
|
||
|
|
|
||
|
|
/**
|
||
|
|
@Summary
|
||
|
|
Default Interrupt Handler for IOCCF7 pin
|
||
|
|
|
||
|
|
@Description
|
||
|
|
This is a predefined interrupt handler to be used together with the IOCCF7_SetInterruptHandler() method.
|
||
|
|
This handler is called every time the IOCCF7 ISR is executed.
|
||
|
|
|
||
|
|
@Preconditions
|
||
|
|
Pin Manager intializer called
|
||
|
|
|
||
|
|
@Returns
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Param
|
||
|
|
None.
|
||
|
|
|
||
|
|
@Example
|
||
|
|
PIN_MANAGER_Initialize();
|
||
|
|
IOCCF7_SetInterruptHandler(IOCCF7_DefaultInterruptHandler);
|
||
|
|
|
||
|
|
*/
|
||
|
|
void IOCCF7_DefaultInterruptHandler(void);
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
#endif // PIN_MANAGER_H
|
||
|
|
/**
|
||
|
|
End of File
|
||
|
|
*/
|