caiyu/nextpnr
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Remove files from tree

Browse Source
This commit is contained in:
Eddie Hung 2018-12-27 23:12:57 -08:00
parent e00d6000d7
commit 5cf0c559fa
2 changed files with 0 additions and 304 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

177
xc7/125MHz_to_60MHz.v
View File

@ -1,177 +0,0 @@
// file: clk_wiz_v3_6.v
//
// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//
//----------------------------------------------------------------------------
// User entered comments
//----------------------------------------------------------------------------
// None
//
//----------------------------------------------------------------------------
// "Output Output Phase Duty Pk-to-Pk Phase"
// "Clock Freq (MHz) (degrees) Cycle (%) Jitter (ps) Error (ps)"
//----------------------------------------------------------------------------
// CLK_OUT1____60.000______0.000______50.0______231.736____234.038
//
//----------------------------------------------------------------------------
// "Input Clock Freq (MHz) Input Jitter (UI)"
//----------------------------------------------------------------------------
// __primary_________125.000____________0.010
`timescale 1ps/1ps
(* CORE_GENERATION_INFO = "clk_wiz_v3_6,clk_wiz_v3_6,{component_name=clk_wiz_v3_6,use_phase_alignment=false,use_min_o_jitter=false,use_max_i_jitter=false,use_dyn_phase_shift=false,use_inclk_switchover=false,use_dyn_reconfig=false,feedback_source=FDBK_AUTO,primtype_sel=MMCM_ADV,num_out_clk=1,clkin1_period=8.000,clkin2_period=10.000,use_power_down=false,use_reset=false,use_locked=false,use_inclk_stopped=false,use_status=false,use_freeze=false,use_clk_valid=false,feedback_type=SINGLE,clock_mgr_type=MANUAL,manual_override=false}" *)
module clk_wiz_v3_6
(// Clock in ports
input CLK_IN1,
// Clock out ports
output CLK_OUT1
);
// Input buffering
//------------------------------------
assign clkin1 = CLK_IN1;
// Clocking primitive
//------------------------------------
// Instantiation of the MMCM primitive
// * Unused inputs are tied off
// * Unused outputs are labeled unused
wire [15:0] do_unused;
wire drdy_unused;
wire psdone_unused;
wire locked_unused;
wire clkfbout;
wire clkfboutb_unused;
wire clkout0b_unused;
wire clkout1_unused;
wire clkout1b_unused;
wire clkout2_unused;
wire clkout2b_unused;
wire clkout3_unused;
wire clkout3b_unused;
wire clkout4_unused;
wire clkout5_unused;
wire clkout6_unused;
wire clkfbstopped_unused;
wire clkinstopped_unused;
MMCME2_ADV
#(.BANDWIDTH ("OPTIMIZED"),
.CLKOUT4_CASCADE ("FALSE"),
.COMPENSATION ("ZHOLD"),
.STARTUP_WAIT ("FALSE"),
.DIVCLK_DIVIDE (5),
.CLKFBOUT_MULT_F (40.500),
.CLKFBOUT_PHASE (0.000),
.CLKFBOUT_USE_FINE_PS ("FALSE"),
.CLKOUT0_DIVIDE_F (16.875),
.CLKOUT0_PHASE (0.000),
.CLKOUT0_DUTY_CYCLE (0.500),
.CLKOUT0_USE_FINE_PS ("FALSE"),
.CLKIN1_PERIOD (8.000),
.REF_JITTER1 (0.010))
mmcm_adv_inst
// Output clocks
(.CLKFBOUT (clkfbout),
.CLKFBOUTB (clkfboutb_unused),
.CLKOUT0 (clkout0),
.CLKOUT0B (clkout0b_unused),
.CLKOUT1 (clkout1_unused),
.CLKOUT1B (clkout1b_unused),
.CLKOUT2 (clkout2_unused),
.CLKOUT2B (clkout2b_unused),
.CLKOUT3 (clkout3_unused),
.CLKOUT3B (clkout3b_unused),
.CLKOUT4 (clkout4_unused),
.CLKOUT5 (clkout5_unused),
.CLKOUT6 (clkout6_unused),
// Input clock control
.CLKFBIN (clkfbout),
.CLKIN1 (clkin1),
.CLKIN2 (1'b0),
// Tied to always select the primary input clock
.CLKINSEL (1'b1),
// Ports for dynamic reconfiguration
.DADDR (7'h0),
.DCLK (1'b0),
.DEN (1'b0),
.DI (16'h0),
.DO (do_unused),
.DRDY (drdy_unused),
.DWE (1'b0),
// Ports for dynamic phase shift
.PSCLK (1'b0),
.PSEN (1'b0),
.PSINCDEC (1'b0),
.PSDONE (psdone_unused),
// Other control and status signals
.LOCKED (locked_unused),
.CLKINSTOPPED (clkinstopped_unused),
.CLKFBSTOPPED (clkfbstopped_unused),
.PWRDWN (1'b0),
.RST (1'b0));
// Output buffering
//-----------------------------------
//BUFG clkout1_buf
// (.O (CLK_OUT1),
// .I (clkout0));
// BUFG not currently supported
BUFGCTRL clkout1_buf (
.I0(clkout0),
.CE0(1'b1),
.S0(1'b1),
.O(CLK_OUT1)
);
endmodule

127
xc7/attosoc.v
View File

@ -1,127 +0,0 @@
/*
* ECP5 PicoRV32 demo
*
* Copyright (C) 2017 Clifford Wolf <clifford@clifford.at>
* Copyright (C) 2018 David Shah <dave@ds0.me>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
`ifdef PICORV32_V
`error "attosoc.v must be read before picorv32.v!"
`endif
`define PICORV32_REGS picosoc_regs
module attosoc (
input clk,
output reg [7:0] led
);
reg [5:0] reset_cnt = 0;
wire resetn = &reset_cnt;
always @(posedge clk) begin
reset_cnt <= reset_cnt + !resetn;
end
parameter integer MEM_WORDS = 256;
parameter [31:0] STACKADDR = (4*MEM_WORDS); // end of memory
parameter [31:0] PROGADDR_RESET = 32'h 0000_0000; // ROM at 0x0
parameter integer ROM_BYTES = 256;
reg [7:0] rom [0:ROM_BYTES-1];
wire [31:0] rom_rdata = {rom[mem_addr+3], rom[mem_addr+2], rom[mem_addr+1], rom[mem_addr+0]};
initial $readmemh("firmware.hex", rom);
wire mem_valid;
wire mem_instr;
wire mem_ready;
wire [31:0] mem_addr;
wire [31:0] mem_wdata;
wire [3:0] mem_wstrb;
wire [31:0] mem_rdata;
wire rom_ready = mem_valid && mem_addr[31:24] == 8'h00;
wire iomem_valid;
wire iomem_ready;
wire [31:0] iomem_addr;
wire [31:0] iomem_wdata;
wire [3:0] iomem_wstrb;
wire [31:0] iomem_rdata;
assign iomem_valid = mem_valid && (mem_addr[31:24] > 8'h 01);
assign iomem_ready = 1'b1;
assign iomem_wstrb = mem_wstrb;
assign iomem_addr = mem_addr;
assign iomem_wdata = mem_wdata;
wire [31:0] spimemio_cfgreg_do;
always @(posedge clk)
if (iomem_valid && iomem_wstrb[0])
led <= iomem_wdata[7:0];
assign mem_ready = (iomem_valid && iomem_ready) || rom_ready;
assign mem_rdata = rom_rdata;
picorv32 #(
.STACKADDR(STACKADDR),
.PROGADDR_RESET(PROGADDR_RESET),
.PROGADDR_IRQ(32'h 0000_0000),
.BARREL_SHIFTER(0),
.COMPRESSED_ISA(0),
.ENABLE_MUL(0),
.ENABLE_DIV(0),
.ENABLE_IRQ(0),
.ENABLE_IRQ_QREGS(0)
) cpu (
.clk (clk ),
.resetn (resetn ),
.mem_valid (mem_valid ),
.mem_instr (mem_instr ),
.mem_ready (mem_ready ),
.mem_addr (mem_addr ),
.mem_wdata (mem_wdata ),
.mem_wstrb (mem_wstrb ),
.mem_rdata (mem_rdata )
);
endmodule
// Implementation note:
// Replace the following two modules with wrappers for your SRAM cells.
module picosoc_regs (
input clk, wen,
input [5:0] waddr,
input [5:0] raddr1,
input [5:0] raddr2,
input [31:0] wdata,
output [31:0] rdata1,
output [31:0] rdata2
);
reg [31:0] regs [0:31];
always @(posedge clk)
if (wen) regs[waddr[4:0]] <= wdata;
assign rdata1 = regs[raddr1[4:0]];
assign rdata2 = regs[raddr2[4:0]];
endmodule