* gowin: implement differential IO primitives
Adds missing TLVDS_IBUF/IOBUF/TBUF primitives, as well as all kinds of
LVDS emulation primitives.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* gowin: fix build
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* gowin: support as differential not only pins A and B
The GW1N-1 and GW1NZ-1 chips have cells with pins up to I, we provide
support for such pins.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
---------
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
These are very cumbersome primitives that take up two cells and
consequently 4 IOLOGIC bels.
The primitives are implemented for the chips that contain them and are
supported by apicula GW1NSR-4C, GW1NR-9 and GW1NR-9C.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
Simple deserialization primitives are implemented for all supported boards.
Compatible with older apicula bases.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* placement of IDES4, IVIDEO, IDES8 and IDES10 primitives is supported;
* primitives are implemented for the GW1N-1, GW1NZ-1, GW1NSR-4C,
GW1NR-9, GW1NR-9C chips;
* tricks required for IOLOGIC to work on one side of the -9 and -9C
chips are taken into account;
Compatible with old apicula bases.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* placement of OSER4, OVIDEO, OSER8 and SER10 primitives is supported;
* primitives are implemented for the GW1N-1, GW1NZ-1, GW1NSR-4C,
GW1NR-9, GW1NR-9C chips;
* the initial support for special HCLK clock wires is implemented to the
extent necessary for OSER primitives to function;
* output to both regular IO and TLVDS_OBUF is supported;
* tricks required for IOLOGIC to work on one side of the -9 and -9C
chips are taken into account;
* various edits, such as using idf() instead of the local buffer.
Compatible with old apicula bases.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
And also unified the fixing of PLL to bels: the point is that PLL being
at a certain location has the possibility to use a direct implicit wire
to the clock source, but once we decide to use this direct wire, the PLL
can no longer be moved.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
This chip is used in the Tangnano9k board.
* all parameters of the rPLL primitive are supported;
* all PLL outputs are treated as clock sources and optimized routing
is applied to them;
* primitive rPLL on different chips has a completely different
structure: for example in GW1N-1 it takes two cells, and in GW1NR-9C
as many as four, despite this unification was carried out and
different chips are processed by the same functions, but this led to
the fact that you can not use the PLL chip GW1N-1 with the old
apicula bases - will issue a warning and refuse to encode primitive.
In other cases compatibility is supported.
* Cosmetic change: the usage report shows the rPLL names without any
service bels.
* I use ctx->idf() on occasion, it's not a total redesign.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* both instances of the new PLLVR type are supported;
* primitive placement is optimized for the use of dedicated PLL clock
pins;
* all 4 outputs of each primitive can use the clock nets (only 5 lines
in total at the same time so far).
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
When a single primitive occupies several cells, care must be taken when
manipulating the parameters of that primitive: when creating cells, each
cell must receive a copy of all the parameters and not modify them
unnecessarily. That is, if possible, it is better to make all parameter
changes before dividing the primitive into cells.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
Uses the information of the special input pins for the PLL in the
current chip. If such pins are involved, no routing is performed and
information about the use of implicit wires is passed to the packer.
The RESET and RESET_P inputs are now also disabled if they are connected
to VSS/VCC.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
The GW1N-1 and GW1NZ-1 have a similar PLL, but the board with the former
chip is already very hard to buy, so let's experiment with a more
affordable chip.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
The rPLL primitive for the simplest chip (GW1N-1) in the family is
processed. All parameters of the primitive are passed on to gowin_pack,
and general-purpose wires are used for routing outputs of the primitive.
Compatible with older versions of apicula, but in this case will refuse
to place the new primitive.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
There is no need to multiply item names, it is a rudiment of my very
first addition to nextpnr.
Fully compatible with older versions of Apicula.
Note: the cosmetic changes in lines with RAM are not my initiative, but
the result of applying clang-format.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
Refactor in order to detect networks that will be routed in a special
mode earlier. This makes it possible to mark the source of such networks
as a global buffer, thereby removing their influence on element
placement.
In addition, timing classes are set for some cells.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
Gowin chips have a highly sophisticated system of long wires that are
wired to each cell and allow the clock or logic to spread quickly.
This commit implements some of the capabilities of the long wire system
for quadrants, leaving out the fine-tuning of them for each column.
To make use of the long wire system, the specified wire is cut at the
driver and a special cell is placed between the driver and the rest of
the wire.
* VCC and GND can not use long wires because they are in every cell and
there is no point in using a net
* Long wire numbers can be specified manually or assigned automatically.
* The route from the driver to the port of the new cell can be quite
long, this will have to be solved somehow.
* It might make sense to add a mechanism for automatically finding
candidates for long wires.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
This chip has a different default state for one type of I/O buffer ---
you have to explicitly switch it to the normal state by feeding VCC/VSS
to certain inputs.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
Compatible with older versions of apicula bases.
Also small fixes and as the number of virtual Bels grows it is necessary
to assign them Z coordinate in a centralized way to avoid conflicts and
for this purpose introduced the BelZ enum.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
GSR is added automatically if it was not instantiated by the user explicitly.
Compatible with old apicula bases, the functionality does not work, but
the crash does not happen --- just a warning.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
This uses a new data structure for net.users that allows gaps, so
removing a port from a net is no longer an O(n) operation on the number
of users the net has.
Signed-off-by: gatecat <gatecat@ds0.me>
The new primitive appears as an amalgamation of two existing OBUF
primitives. Compatible with older versions of apicula, although, of
course, using TLVDS_OBUF with old databases will not bring the desired
result, but no crash.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
Some models have I/O cells that are IOBUFs, and other types (IBUFs and
OBUFs) are obtained by feeding 1 or 0 to the OEN input. This is done
with general-purpose routing so it's best to do it here to avoid
conflicts.
For this purpose, in the new bases, these special cells are of type IOBS
(IOB Simplified).
The proposed changes are compatible with bases of previous versions of
Apycula and do not require changing .CST constraint files.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
- Both the mode used by yosys and all Gowin primitive modes are supported.
- The ALU always starts with a zero slice.
- The maximum length of the ALU chain is limited to one line of the chip.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
