10a5a44b81
DQCE and DCS primitives are added.
DQCE allows the internal logic to enable or disable the clock network in
the quadrant. When clock network is disabled, all logic drivern by this
clock is no longer toggled, thus reducing the total power consumtion of
the device.
DCS allows you to select one of four sources for two clock wires (6 and 7).
Wires 6 and 7 have not been used up to this point.
Since "hardware" primitives operate strictly in their own quadrants,
user-specified primitives are converted into one or more "hardware"
primitives as needed.
Also:
- minor edits to make the most of helper functions like connectPorts()
- when creating bases, the corresponding constants are assigned to the
VCC and GND wires, but for now huge nodes are used because, for an
unknown reason, the constants mechanism makes large examples
inoperable. So for now we remain on the nodes.
Compatible with older Apicula databases.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
102 lines
3.7 KiB
C++
102 lines
3.7 KiB
C++
#ifndef GOWIN_UTILS_H
|
|
#define GOWIN_UTILS_H
|
|
|
|
#include "idstringlist.h"
|
|
#include "nextpnr_namespaces.h"
|
|
#include "nextpnr_types.h"
|
|
|
|
NEXTPNR_NAMESPACE_BEGIN
|
|
|
|
namespace BelFlags {
|
|
static constexpr uint32_t FLAG_SIMPLE_IO = 0x100;
|
|
}
|
|
|
|
struct GowinUtils
|
|
{
|
|
Context *ctx;
|
|
|
|
GowinUtils() {}
|
|
|
|
void init(Context *ctx) { this->ctx = ctx; }
|
|
|
|
// tile
|
|
IdString get_tile_class(int x, int y);
|
|
Loc get_tile_io16_offs(int x, int y);
|
|
|
|
// pin functions: GCLKT_4, SSPI_CS, READY etc
|
|
IdStringList get_pin_funcs(BelId io_bel);
|
|
|
|
// PLL pads (type - CLKIN, FeedBack, etc)
|
|
BelId get_pll_bel(BelId io_bel, IdString type);
|
|
|
|
// Bels and pips
|
|
bool is_simple_io_bel(BelId bel);
|
|
Loc get_pair_iologic_bel(Loc loc);
|
|
BelId get_io_bel_from_iologic(BelId bel);
|
|
BelId get_dqce_bel(IdString spine_name);
|
|
BelId get_dcs_bel(IdString spine_name);
|
|
|
|
// BSRAM
|
|
bool has_SP32(void);
|
|
bool need_SP_fix(void);
|
|
bool need_BSRAM_OUTREG_fix(void);
|
|
bool need_BLKSEL_fix(void);
|
|
|
|
// Power saving
|
|
bool has_BANDGAP(void);
|
|
|
|
// DSP
|
|
inline int get_dsp_18_z(int z) const { return z & (~3); }
|
|
inline int get_dsp_9_idx(int z) const { return z & 3; }
|
|
inline int get_dsp_18_idx(int z) const { return z & 4; }
|
|
inline int get_dsp_paired_9(int z) const { return (3 - get_dsp_9_idx(z)) | (z & (~3)); }
|
|
inline int get_dsp_mult_from_padd(int padd_z) const { return padd_z + 8; }
|
|
inline int get_dsp_padd_from_mult(int mult_z) const { return mult_z - 8; }
|
|
inline int get_dsp_next_macro(int z) const { return z + 32; }
|
|
inline int get_dsp(int z) const { return BelZ::DSP_Z; }
|
|
inline int get_dsp_macro(int z) const { return (z & 0x20) + BelZ::DSP_0_Z; }
|
|
inline int get_dsp_macro_num(int z) const { return (z & 0x20) >> 5; }
|
|
Loc get_dsp_next_9_in_chain(Loc from) const;
|
|
Loc get_dsp_next_macro_in_chain(Loc from) const;
|
|
Loc get_dsp_next_in_chain(Loc from, IdString dsp_type) const;
|
|
|
|
// check bus.
|
|
// This is necessary to find the head in the DSP chain - these buses are
|
|
// not switched in the hardware, but in software you can leave them
|
|
// unconnected or connect them to VCC or VSS, which is the same - as I
|
|
// already said, they are hard-wired and we are only discovering the fact
|
|
// that they are not connected to another DSP in the chain.
|
|
CellInfo *dsp_bus_src(const CellInfo *ci, const char *bus_prefix, int wire_num) const;
|
|
CellInfo *dsp_bus_dst(const CellInfo *ci, const char *bus_prefix, int wire_num) const;
|
|
|
|
bool is_diff_io_supported(IdString type);
|
|
bool has_bottom_io_cnds(void);
|
|
IdString get_bottom_io_wire_a_net(int8_t condition);
|
|
IdString get_bottom_io_wire_b_net(int8_t condition);
|
|
|
|
// wires
|
|
inline bool is_wire_type_default(IdString wire_type) { return wire_type == IdString(); }
|
|
// If wire is an important part of the global network (like SPINExx)
|
|
inline bool is_global_wire(WireId wire) const
|
|
{
|
|
return ctx->getWireName(wire)[1].in(
|
|
id_SPINE0, id_SPINE1, id_SPINE2, id_SPINE3, id_SPINE4, id_SPINE5, id_SPINE6, id_SPINE7, id_SPINE8,
|
|
id_SPINE9, id_SPINE10, id_SPINE11, id_SPINE12, id_SPINE13, id_SPINE14, id_SPINE15, id_SPINE16,
|
|
id_SPINE17, id_SPINE18, id_SPINE19, id_SPINE20, id_SPINE21, id_SPINE22, id_SPINE23, id_SPINE24,
|
|
id_SPINE25, id_SPINE26, id_SPINE27, id_SPINE28, id_SPINE29, id_SPINE30, id_SPINE31);
|
|
}
|
|
|
|
// pips
|
|
inline bool is_global_pip(PipId pip) const
|
|
{
|
|
return is_global_wire(ctx->getPipSrcWire(pip)) || is_global_wire(ctx->getPipDstWire(pip));
|
|
}
|
|
|
|
// make cell but do not include it in the list of chip cells.
|
|
std::unique_ptr<CellInfo> create_cell(IdString name, IdString type);
|
|
};
|
|
|
|
NEXTPNR_NAMESPACE_END
|
|
|
|
#endif
|