.. |
arch_place.cc
|
Cleanup
|
2018-12-26 18:14:23 -08:00 |
arch_pybindings.cc
|
make gui run
|
2018-11-28 17:04:26 +01:00 |
arch_pybindings.h
|
make gui run
|
2018-11-28 17:04:26 +01:00 |
arch.cc
|
Use std::regex not boost::regex (even though Torc still depends on latter)
|
2018-12-27 21:25:22 -08:00 |
arch.h
|
Cleanup
|
2018-12-26 18:14:23 -08:00 |
archdefs.h
|
Add missing operator needed by router_improve
|
2018-11-13 10:10:57 -08:00 |
attosoc_tb.vhd
|
Add report to attosoc_tb.vhd
|
2018-12-02 15:41:30 -08:00 |
attosoc_top.v
|
Re-enable PLL in attosoc.v
|
2018-12-02 15:41:03 -08:00 |
attosoc.pcf
|
Add attosoc
|
2018-11-30 15:24:32 -08:00 |
attosoc.sh
|
nextpnr now writes to log, netgen to overwrite
|
2018-12-02 15:40:20 -08:00 |
attosoc.ys
|
Add attosoc
|
2018-11-30 15:24:32 -08:00 |
blinky_sim.sh
|
Add blinky_sim.sh
|
2018-12-27 23:26:47 -08:00 |
blinky_sim.ys
|
Fix blinky.sh and blinky_sim.sh
|
2018-12-27 23:02:33 -08:00 |
blinky_tb.vhd
|
Fix blinky.sh and blinky_sim.sh
|
2018-12-27 23:02:33 -08:00 |
blinky.pcf
|
Place blinky BUFG in dedicated location for input pin
|
2018-12-06 18:02:10 -08:00 |
blinky.proj
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
blinky.sh
|
Fix blinky.sh and blinky_sim.sh
|
2018-12-27 23:02:33 -08:00 |
blinky.v
|
Add implicit wire
|
2018-12-27 23:27:50 -08:00 |
blinky.ys
|
Hacked blinky.ys yosys script
|
2018-08-11 22:23:52 -07:00 |
cells.cc
|
Always set SYNC_ATTR otherwise netgen fails
|
2018-12-27 21:53:11 -08:00 |
cells.h
|
clangformat
|
2018-11-03 15:18:26 -07:00 |
chains.cc
|
clangformat
|
2018-11-03 15:18:26 -07:00 |
chains.h
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
chipdb.py
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
constids.inc
|
Missing files
|
2018-12-07 22:23:15 +00:00 |
delay.cc
|
Cleanup
|
2018-12-26 18:14:23 -08:00 |
family.cmake
|
Update xc7/family.cmake to use submodule torc
|
2018-12-27 21:25:07 -08:00 |
firmware.hex
|
firmware.hex with delay loop
|
2018-11-30 15:23:09 -08:00 |
gfx.cc
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
gfx.h
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
main.cc
|
Remove fasm writer
|
2018-12-26 17:10:52 -08:00 |
pack.cc
|
Revert "Revert "Do not add "$iob" suffix""
|
2018-12-27 21:43:10 -08:00 |
pcf.cc
|
[xc7] Also ignore PIN token lines for PCF
|
2018-11-05 08:21:14 -08:00 |
pcf.h
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
picorv32_benchmark.py
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
picorv32_top.v
|
Add PLL to bring 125MHz clock to 60MHz for picorv32
|
2018-11-29 12:25:39 -08:00 |
picorv32.pcf
|
Add PLL to bring 125MHz clock to 60MHz for picorv32
|
2018-11-29 12:25:39 -08:00 |
picorv32.proj
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
picorv32.sh
|
Update picorv32.sh
|
2018-11-13 11:07:43 -08:00 |
picorv32.ys
|
Add PLL to bring 125MHz clock to 60MHz for picorv32
|
2018-11-29 12:25:39 -08:00 |
project.cc
|
Load Torc DDB
|
2018-08-11 15:53:55 -07:00 |
tmfuzz.py
|
Copy ice40 into xc7
|
2018-08-11 14:35:49 -07:00 |
xdl.cc
|
Write SYNC_ATTR to xdl too
|
2018-12-27 21:56:15 -08:00 |
xdl.h
|
Remove fasm writer
|
2018-12-26 17:10:52 -08:00 |