1.8 KiB
1.8 KiB
nextpnr-machxo2
To be filled in w/ details later.
Quick Start
The following commands are known to work on a near-fresh Linux Mint system (thank you securelyfitz!):
Prerequisites
sudo apt install cmake clang-format libboost-all-dev build-essential
qt5-default libeigen3-dev build-essential clang bison flex libreadline-dev
gawk tcl-dev libffi-dev git graphviz xdot pkg-config python3
libboost-system-dev libboost-python-dev libboost-filesystem-dev zlib1g-dev
python3-setuptools python3-serial
Installation
Use an empty directory to hold all the cloned repositories.
git clone git@github.com:cr1901/prjtrellis.git
cd prjtrellis
git checkout facade
git submodule update --init --recursive
cd libtrellis
cmake -DCMAKE_INSTALL_PREFIX=/usr
make -j 8
sudo make install
cd ../../
git clone git@github.com:cr1901/yosys.git
cd yosys/
git checkout machxo2
make config-gcc
make
sudo make install
cd ../
git clone git@github.com:tinyfpga/TinyFPGA-A-Programmer.git
cd TinyFPGA-A-Programmer/
sudo python setup.py install
cd ../
git clone git@github.com:cr1901/nextpnr.git
cd nextpnr
git checkout machxo2
git submodule update --init --recursive
cmake . -DARCH=machxo2 -DBUILD_GUI=OFF -DTRELLIS_INSTALL_PREFIX=/usr -DBUILD_PYTHON=OFF -DBUILD_HEAP=OFF
make
Demo
If you have a TinyFPGA Ax2 board with the TinyFPGA Programmer, the following script will build a blinky bitstream and load it onto the MachXO2; the gateware will flash the LED!
cd machxo2/examples/
sh demo.sh
The tinyfpga.v code used in demo.sh is slightly modified from the
user's guide to accommodate
(* LOC = "pin" *) constraints.