触摸屏调试通过

NS2009.cpp

@@ -11,22 +11,19 @@ int Map_Data (int Data, int InMin, int InMax, int OutMin, int OutMax)
   return ((Data-InMin)*(OutMax-OutMin))/(InMax-InMin)+OutMin;
 }
 
-NS2009::NS2009 (void)
+NS2009::NS2009 (void) {
-{
   Address = DEFAULT_NS2009_ADDR;
   FlipX = false;
   FlipY = false;
 }
 
-NS2009::NS2009 (unsigned char _Address)
+NS2009::NS2009 (unsigned char _Address) {
-{
   Address = _Address;
   FlipX = false;
   FlipY = false;
 }
 
-NS2009::NS2009 (bool _FlipX, bool _FlipY)
+NS2009::NS2009 (bool _FlipX, bool _FlipY) {
-{
   Address = DEFAULT_NS2009_ADDR;
   FlipX = _FlipX;
   FlipY = _FlipY;
@@ -44,11 +41,14 @@ unsigned int NS2009::ReadRegister (unsigned char Command)
   unsigned char ReadData[2], i=0;
   Wire.beginTransmission(Address);
   Wire.write(&Command, 1);
+  Wire.endTransmission();
   Wire.requestFrom(Address, 2);
-  while (Wire.available())
+  while (i < 2){
     ReadData[i++] = Wire.read();
+  }
+  Wire.endTransmission();
+
   return (ReadData[0] << 4) | (ReadData[1] >> 4);
-  delay(10);
 }
 
 void NS2009::Calibrate ()
@@ -97,8 +97,11 @@ void NS2009::Scan ()
 {
   CheckTouched ();
   RawX = ReadRegister(NS2009_READ_X);
+  delay(1);
   X = Map_Data (RawX, MinX, MaxX, 0, SCREEN_SIZE_X);
   RawY = ReadRegister(NS2009_READ_Y);
+  delay(1);
+
   Y = Map_Data (RawY, MinY, MaxY, 0, SCREEN_SIZE_Y);
   if (FlipX)
     X = SCREEN_SIZE_X - X;

SweepLo.ino

@@ -74,6 +74,7 @@ static bool			jsonDocInitialised = false;
 static uint16_t		chunkIndex;
 static uint32_t		offsetIF;			// IF frequency offset by half the bandwidth to position in the centre of the filter
 static uint32_t		tgIF;				// Track gen IF - SA IF plus any offset if both SI4432 defined
+	pinMode (RF_SWITCH, OUTPUT);
 
 
 #ifdef RF_SWITCH

sketch_jan8a.ino

@@ -444,7 +444,6 @@ void setup()
   Wire.setPins(9,8);
   Wire.begin();
   Serial.begin ( 115200);						// Start up the USB connection
-  NS2009 TS;                                      // address is the default one (0x48), no flip around X and Y axis
 
   Serial.print("starrt init \r\n");
   bool fsStatus = false;				 				// True if SPIFFS loads ok
@@ -476,6 +475,7 @@ void setup()
 
 
 
+
 /*
  *  The touch screen needs to be calibrated. In previous versions, the instructions
  *  were to un-comment the call to the "TouchCalibrate" here the first time you
@@ -497,17 +497,14 @@ void setup()
 #ifdef BACKLIGHT_LEVEL
 	setUpLEDC();							// Set up the backlight control
 #endif
+	/*
+	初始化ns2009配置
+	*/
+	Wire.beginTransmission(0x48);
+	Wire.write(0x86);
+	Wire.endTransmission();
+	delay(4000);
  
- 
- while(1){
-    TS.Scan ();
-  if (TS.Touched)
-  {
-    Serial.printf("X=%3.d, RawX=%4d;     Y=%3.d RawY=%4d\n\r", TS.X, TS.RawX, TS.Y, TS.RawY);
-    delay (50);
-  }
-      delay (50);
- }
 /*
  *  Display the splash screen:
  */
@@ -537,6 +534,7 @@ void setup()
 
 
 
+
 /*
  * Set the CS pins normally used for the SI4432 to high, so if present they do not interfere
  * with the bus signals

ui.cpp

@@ -1010,20 +1010,27 @@ uint8_t getTouch ( uint16_t *x, uint16_t *y )
 	return true;							// Indicate touch is valid
 }
 
+NS2009 Ts;
+
 
 static int touch_check ( void )				// Check for TS touched
 {
 	uint16_t	x = 0;						// Used to store the "X" and 
 	uint16_t	y = 0;						// "Y" coordinates
 	
-	int stat = getTouch ( &x, &y );			// Read the touch screen
+		Ts.Scan();
+
+
+	// int stat = getTouch ( &x, &y );			// Read the touch screen
 
 //	Serial.printf ( "TouchCheck stat=%i, x=%i, y=%i \n", stat, x, y );	// Debugging
 
-	if ( stat )								// Valid touch if non-zero
+	int stat = Ts.Touched;
+
+	if ( Ts.Touched )								// Valid touch if non-zero
 	{
-		last_touch_x = x;					// Save coordinates for ???
+		last_touch_x = 320-  Ts.Y;					// Save coordinates for ???
-		last_touch_y = y;
+		last_touch_y =  240 - Ts.X;
 	}
     
 	if ( stat != last_touch_status )		// Did the status change?

ui.h

@@ -8,7 +8,7 @@
 #include <Arduino.h>						// Standard stuff
 #include "simpleSA.h"							// General definitions for the program
 #include "preferences.h"					// Things to save in flash memory
-
+#include "ns2009.h"
 #ifndef _UI_H_
 #define _UI_H_								// Prevent double inclusion
 
@@ -28,5 +28,6 @@
 
 void	UiProcessTouch ( void );
 void 	ShowSplash ( void );
+void touch_draw_test ( void );
 
 #endif