Rename to simpleSA

renamed to simpleSA

cmd.h

@@ -12,7 +12,7 @@
 #ifndef _CMD_H_
 #define _CMD_H_					// Prevent double inclusion
 
-#include "tinySA.h"				// General program definitions
+#include "simpleSA.h"				// General program definitions
 #include "PE4302.h"				// Class definition for thePE4302 attenuator
 #include "Si4432.h"				// Class definition for the Si4432 transceiver
 #include "preferences.h"		// For saving the "setting" structure

marker.h

@@ -5,7 +5,7 @@
 #ifndef _MARKERS_H_							// Prevent double include
 #define _MARKERS_H_
 
-#include "tinySA.h"							// Definitions needed by the whole program
+#include "simpleSA.h"							// Definitions needed by the whole program
 
 	#define MARKER_COUNT			4		// MUST be set to '4' for now
 

pE4302.h

@@ -12,7 +12,7 @@
 #include <Arduino.h>						// General Arduino definitions
 #include <Wire.h>							// I2C library
 #include <SPI.h>              // Serial Peripheral Interface library
-#include "tinySA.h"   
+#include "simpleSA.h"   
 
 /*
  *	In order to save GPIO pins on the ESP32, Glenn (VK3PE) and I decided to use a 

preferences.cpp

@@ -16,7 +16,7 @@
 #include "Arduino.h"								// Basic Arduino definitions
 #include <Preferences.h>							// Preferences library header
 #include "preferences.h"							// Our function prototypes
-#include "tinySA.h"									// General program-wide definitions and stuff
+#include "simpleSA.h"									// General program-wide definitions and stuff
 
 extern	Preferences	preferences;					// The Preferences object - Created in the main file
 

preferences.h

@@ -13,7 +13,7 @@
  *		Version 1.0 - Just add comments and try to figure out how it all works!
  */
 
-#include "tinySA.h"							// Definitions for the entire program
+#include "simpleSA.h"							// Definitions for the entire program
 
 extern config_t		config;					// Default colors, touch screen calibration, etc.
 extern settings_t	setting;				// Scan limits and other scan parameters

simpleSA.ino

@@ -1,5 +1,5 @@
 /*
- *	"JMP_tinySA.ino_V3.0"
+ *	"simpleSA.ino"
  *
  *	This is the main program file for the "TinySA for ESP32" (spectrum analyzer) 
  *
@@ -127,10 +127,15 @@
  *			New menu for tracking generator accessed from Output Menu
  *			SPI now runs at 16MHz (was at 1MHz - oops!)
  *			Additional functions in ui.cmd to allow signed frequency entry.
+ *			
+ *		Moved to github for trial
+ *			Added initial changes for bandscope mode
+ *			Added indication of tracking generator on/off
+ *			Renamed to simpleSA
  */
 
 
-#include "tinySA.h"				// Definitions needed by the whole program
+#include "simpleSA.h"				// Definitions needed by the whole program
 #include <Arduino.h>			// Basic Arduino definitions
 #include <SPI.h>				// Serial Peripheral Interface library
 #include <Wire.h>				// I2C library
@@ -142,7 +147,7 @@
 
 #if USE_WIFI					// M0WID - We need the following if using WiFi
 
-	#include "TinySA_wifi.h" 	// Our WiFI definitions
+	#include "simpleSA_wifi.h" 	// Our WiFI definitions
 	#include <WiFi.h>			// ESP32 WiFi support library
 	#include <AsyncTCP.h>		// Asynchronous TCP library for Espressif MCUs
 	#include "SPIFFS.h"			// ESP32 built-in "file system"
@@ -158,7 +163,7 @@
 
 /*
  *	Note the actual definitions for display and touch screen pins used are defined
- *	in the file "M0WID_Setup_ILI9341_TinySA.h" in the "User_Setups" directory of
+ *	in the file "M0WID_Setup_ILI9341_simpleSA.h" in the "User_Setups" directory of
  *	the "TFT_eSPI" library.
  *
  *	These are based on using HSPI (spi2) for display and VSPI (spi3) for the SI4432s
@@ -425,7 +430,7 @@ uint32_t	sweepCount;					// Used to inhibit handling Wifi until
 
 /*
  *	These arrays contain the data for the various scan points; they are used in
- *	here and in the "TinySA_wifi" modules:
+ *	here and in the "simpleSA_wifi" modules:
  */
 
 uint8_t		myData[DISPLAY_POINTS+1];
@@ -716,7 +721,7 @@ bool fsStatus = false;								// True if SPIFFS loads ok
 			startAP ();						// Start it up
 
 		#else								// Connect to the router using SSID 
-											// and password defined in TinySA.h
+											// and password defined in simpleSA.h
 
 			Serial.println ( "Connecting..." );				// Indicate trying to connect
 
@@ -764,7 +769,7 @@ bool fsStatus = false;								// True if SPIFFS loads ok
 
 //	tft.println("Setup Complete");
 
-	Serial.printf ( "\nTinySA Version %s Initialization Complete\n", PROGRAM_VERSION );
+	Serial.printf ( "\nsimpleSA Version %s Initialization Complete\n", PROGRAM_VERSION );
 
 	ShowMenu ();								// Display the menu of commands on serial monitor
 

simpleSA_wifi.cpp

@@ -1,5 +1,5 @@
 /*
- *	"TinySA_wifi.cpp"
+ *	"simpleSA_wifi.cpp"
  *
  *	Trial wifi charting functionality to see if WiFi affects the scan results
  *	Based on example here https://circuits4you.com/2019/01/11/esp8266-data-logging-with-real-time-graphs/
@@ -15,7 +15,7 @@
  */
 
 
-#include "TinySA_wifi.h"				// WiFi definitions
+#include "simpleSA_wifi.h"				// WiFi definitions
 #include "Si4432.h"						// Si4432 definitions
 #include "Cmd.h"						// Command processing functions
 

simpleSA_wifi.h

@@ -8,7 +8,7 @@
 #define TINYSA_WIFI_H_					// Prevent double inclusion
   
 #include "Arduino.h"					// Basic Arduino definitions
-#include "tinySA.h"						// Program definitions
+#include "simpleSA.h"						// Program definitions
 #include "Si4432.h"						// RF module definitions
 
 #include <WiFi.h>						// WiFi library

ui.cpp

@@ -28,7 +28,7 @@
 
 
 #include <SPI.h>						// SPI Bus handling library
-#include "tinySA.h"
+#include "simpleSA.h"
 #include "ui.h"							// User interface definitions and prototypes
 #include "Cmd.h"						// Command processing functions
 #include "preferences.h"				// Save/recall functions

ui.h

@@ -6,7 +6,7 @@
  */
 
 #include <Arduino.h>						// Standard stuff
-#include "tinySA.h"							// General definitions for the program
+#include "simpleSA.h"							// General definitions for the program
 #include "preferences.h"					// Things to save in flash memory
 
 #ifndef _UI_H_