/**
@page FSMC_NAND FSMC_NAND
@verbatim
******************** (C) COPYRIGHT 2009 STMicroelectronics *******************
* @file FSMC/NAND/readme.txt
* @author MCD Application Team
* @version V3.1.0
* @date 06/19/2009
* @brief Description of the FSMC NAND Example.
******************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
******************************************************************************
@endverbatim
@par Example Description
This example provides a basic example of how to use the FSMC firmware library and
an associate driver to perform erase/read/write operations on the NAND512W3A2 memory
mounted on STM3210E-EVAL board.
@par Directory contents
- FSMC/NAND/stm32f10x_conf.h Library Configuration file
- FSMC/NAND/stm32f10x_it.c Interrupt handlers
- FSMC/NAND/stm32f10x_it.h Header for stm32f10x_it.c
- FSMC/NAND/fsmc_nand.c Driver for NAND memory
- FSMC/NAND/fsmc_nand.h Header for fsmc_nand.c
- FSMC/NAND/main.c Main program
@par Hardware and Software environment
- This example runs only on STM32F10x High-Density Devices.
- This example has been tested with STMicroelectronics STM3210E-EVAL (STM32F10x
High-Density) evaluation board.
To select the STMicroelectronics evaluation board used to run the example,
uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)
- STM3210E-EVAL Set-up
- This example runs on STMicroelectronics STM3210E-EVAL evaluation board RevD.
@note make sure that the Jumper 7 (JP7) is in position 1<-->2.
@par How to use it ?
In order to make the program work, you must do the following:
- Create a project and setup all project configuration
- Add the required Library files:
- stm32f10x_gpio.c
- stm32f10x_fsmc.c
- stm32f10x_rcc.c
- stm32f10x_exti.c
- misc.c
- stm32f10x_usart.c
- system_stm32f10x.c (under Libraries\CMSIS\Core\CM3)
- stm32_eval.c (under Utilities\STM32_EVAL)
- Edit stm32f10x.h file to select the device you are working on (#define
STM32F10X_HD, in this case).
- Edit stm32_eval.h file to select the evaluation board you will use.
@b Tip: You can tailor the provided project template to run this example, for
more details please refer to "stm32f10x_stdperiph_lib_um.chm" user
manual; select "Peripheral Examples" then follow the instructions
provided in "How to proceed" section.
- Link all compiled files and load your image into target memory
- Run the example
@note
- Low-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 16 and 32 Kbytes.
- Medium-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 32 and 128 Kbytes.
- High-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 256 and 512 Kbytes.
- Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
* <h3><center>© COPYRIGHT 2009 STMicroelectronics</center></h3>
*/
c9c6a81ba7