86 lines
3.5 KiB
Plaintext
86 lines
3.5 KiB
Plaintext
/**
|
|
@page FSMC_NAND FSMC_NAND
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2009 STMicroelectronics *******************
|
|
* @file FSMC/NAND/readme.txt
|
|
* @author MCD Application Team
|
|
* @version V3.1.0
|
|
* @date 06/19/2009
|
|
* @brief Description of the FSMC NAND Example.
|
|
******************************************************************************
|
|
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
|
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
|
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
|
|
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
|
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
|
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
This example provides a basic example of how to use the FSMC firmware library and
|
|
an associate driver to perform erase/read/write operations on the NAND512W3A2 memory
|
|
mounted on STM3210E-EVAL board.
|
|
|
|
@par Directory contents
|
|
|
|
- FSMC/NAND/stm32f10x_conf.h Library Configuration file
|
|
- FSMC/NAND/stm32f10x_it.c Interrupt handlers
|
|
- FSMC/NAND/stm32f10x_it.h Header for stm32f10x_it.c
|
|
- FSMC/NAND/fsmc_nand.c Driver for NAND memory
|
|
- FSMC/NAND/fsmc_nand.h Header for fsmc_nand.c
|
|
- FSMC/NAND/main.c Main program
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs only on STM32F10x High-Density Devices.
|
|
|
|
- This example has been tested with STMicroelectronics STM3210E-EVAL (STM32F10x
|
|
High-Density) evaluation board.
|
|
To select the STMicroelectronics evaluation board used to run the example,
|
|
uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)
|
|
|
|
- STM3210E-EVAL Set-up
|
|
- This example runs on STMicroelectronics STM3210E-EVAL evaluation board RevD.
|
|
|
|
@note make sure that the Jumper 7 (JP7) is in position 1<-->2.
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following:
|
|
- Create a project and setup all project configuration
|
|
- Add the required Library files:
|
|
- stm32f10x_gpio.c
|
|
- stm32f10x_fsmc.c
|
|
- stm32f10x_rcc.c
|
|
- stm32f10x_exti.c
|
|
- misc.c
|
|
- stm32f10x_usart.c
|
|
- system_stm32f10x.c (under Libraries\CMSIS\Core\CM3)
|
|
- stm32_eval.c (under Utilities\STM32_EVAL)
|
|
|
|
- Edit stm32f10x.h file to select the device you are working on (#define
|
|
STM32F10X_HD, in this case).
|
|
- Edit stm32_eval.h file to select the evaluation board you will use.
|
|
|
|
@b Tip: You can tailor the provided project template to run this example, for
|
|
more details please refer to "stm32f10x_stdperiph_lib_um.chm" user
|
|
manual; select "Peripheral Examples" then follow the instructions
|
|
provided in "How to proceed" section.
|
|
- Link all compiled files and load your image into target memory
|
|
- Run the example
|
|
|
|
@note
|
|
- Low-density devices are STM32F101xx and STM32F103xx microcontrollers where
|
|
the Flash memory density ranges between 16 and 32 Kbytes.
|
|
- Medium-density devices are STM32F101xx and STM32F103xx microcontrollers where
|
|
the Flash memory density ranges between 32 and 128 Kbytes.
|
|
- High-density devices are STM32F101xx and STM32F103xx microcontrollers where
|
|
the Flash memory density ranges between 256 and 512 Kbytes.
|
|
- Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
|
|
|
|
* <h3><center>© COPYRIGHT 2009 STMicroelectronics</center></h3>
|
|
*/
|