diff --git a/beamsteer.py b/beamsteer.py
deleted file mode 100644
index 21955a6..0000000
--- a/beamsteer.py
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/usr/bin/env python3
-#  Must use Python 3
-# Copyright (C) 2022 Analog Devices, Inc.
-#
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification,
-# are permitted provided that the following conditions are met:
-#     - Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     - Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in
-#       the documentation and/or other materials provided with the
-#       distribution.
-#     - Neither the name of Analog Devices, Inc. nor the names of its
-#       contributors may be used to endorse or promote products derived
-#       from this software without specific prior written permission.
-#     - The use of this software may or may not infringe the patent rights
-#       of one or more patent holders.  This license does not release you
-#       from the requirement that you obtain separate licenses from these
-#       patent holders to use this software.
-#     - Use of the software either in source or binary form, must be run
-#       on or directly connected to an Analog Devices Inc. component.
-#
-# THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
-# PARTICULAR PURPOSE ARE DISCLAIMED.
-#
-# IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
-# RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-''' Simple Beamforming Example Using Phaser and Python'''
-
-# =============================================================================
-# Import statements
-# =============================================================================
-import adi
-import ADAR_pyadi_functions as ADAR  # import the ADAR1000 functions
-import SDR_functions as SDR  # import the Pluto SDR functions
-
-import sys
-import pickle
-import matplotlib.pyplot as plt
-import numpy as np
-
-
-
-# =============================================================================
-# User parameters
-# =============================================================================
-
-rpi_ip = "ip:phaser.local"  # default IP address of Phaser's Raspberry Pi
-sdr_ip = "ip:192.168.2.1"   # default Pluto IP address
-
-# select which signal source to use
-# HB100 (external source)
-# OUT1  (transmit freq is set in config.py)
-# OUT2  (transmit freq is set in config.py)
-SignalSource = 'HB100'     # 'HB100', 'OUT1', or 'OUT2'
-
-# config.py has all the key parameters that you might want to modify
-try:
-    import config as config
-except:
-    print("Make sure config.py is in this directory")
-    sys.exit(0)
-
-
-# =============================================================================
-# Variables setup
-# =============================================================================
-
-# if using HB100, load the signal frequency from "phaser_find_hb100.py" output file
-if SignalSource == 'HB100':
-    try:
-        with open("hb100_freq_val.pkl", "rb") as file1: 
-            config.SignalFreq = pickle.load(file1)
-        print("Found signal freq file, ", config.SignalFreq/1e9, " GHz")
-    except:
-        print("No signal freq found, keeping at ", config.SignalFreq/1e9, " GHz")
-
-"""SET DEFAULT VALUES"""
-sdr_address = sdr_ip
-SignalFreq = config.SignalFreq
-Tx_freq = config.Tx_freq  # Pluto's Tx LO freq.
-Rx_freq = config.Rx_freq  # Pluto's Rx LO freq
-LO_freq = SignalFreq + Rx_freq  # freq of the LTC5548 mixer LO
-SampleRate = config.SampleRate
-Rx_gain = config.Rx_gain
-Tx_gain = config.Tx_gain
-RxGain1 = 100
-RxGain2 = 100
-RxGain3 = 100
-RxGain4 = 100
-RxGain5 = 100
-RxGain6 = 100
-RxGain7 = 100
-RxGain8 = 100
-RxPhase1 = config.Rx1_cal
-RxPhase2 = config.Rx2_cal
-RxPhase3 = config.Rx3_cal
-RxPhase4 = config.Rx4_cal
-RxPhase5 = config.Rx5_cal
-RxPhase6 = config.Rx6_cal
-RxPhase7 = config.Rx7_cal
-RxPhase8 = config.Rx8_cal
-phase_step_size = 2.8125
-c = 299792458  # speed of light in m/s
-d = config.d   # antenna spacing for phaser is 14mm
-gainList = [RxGain1, RxGain2, RxGain3, RxGain4,
-    RxGain5, RxGain6, RxGain7, RxGain8]
-phaseList = [RxPhase1, RxPhase2, RxPhase3, RxPhase4,
-    RxPhase5, RxPhase6, RxPhase7, RxPhase8]
-
-
-# =============================================================================
-# Hardware setup
-# =============================================================================
-
-# Use the onboard VCO to generate the LO?  Or apply source to EXT_LO?
-gpios = adi.one_bit_adc_dac(rpi_ip)
-gpios.gpio_vctrl_1 = 1  # 1=Use onboard PLL/LO source  (0=use external LO input)
-gpios.gpio_vctrl_2 = 1  # 1=Send LO to transmit circuitry  (0=disable Tx path and send LO to LO_OUT)
-
-# setup GPIOs to control if Tx is output on OUT1 or OUT2
-gpios.gpio_div_mr = 1
-gpios.gpio_div_s0 = 0
-gpios.gpio_div_s1 = 0
-gpios.gpio_div_s2 = 0
-  
-# Initialize Pluto
-sdr = SDR.SDR_init(
-    sdr_address,
-    SampleRate,
-    Tx_freq,
-    Rx_freq,
-    Rx_gain,
-    Tx_gain,
-    config.buffer_size,
-    )
-SDR.SDR_LO_init(rpi_ip, LO_freq)  # Set Phaser's ADF4159 to the LO_freq
-
-# Intialize the ADAR1000 receive array
-rx_array = adi.adar1000_array(
-    uri=rpi_ip,
-    chip_ids=["BEAM0", "BEAM1"],  # these are the ADAR1000s' labels in the device tree
-    device_map=[[1], [2]],
-    element_map=[[1, 2, 3, 4, 5, 6, 7, 8]],
-    device_element_map={
-        1: [7, 8, 5, 6],  # i.e. channel2 of device1 (BEAM0), maps to element 8
-        2: [3, 4, 1, 2],
-        },
-    )
-for device in rx_array.devices.values():
-    ADAR.ADAR_init(device)  # resets the ADAR1000
-    ADAR.ADAR_set_mode(device, "rx")  # ADAR1000s on Phaser are receive only, so mode is always "rx"
-ADAR.ADAR_set_Taper(
-    rx_array,
-    gainList
-    )
-
-# Set transmitter to either OUT1 or OUT2 SMA port.  Or disable if using HB100
-if SignalSource == 'OUT1':    # use Phaser's OUT1 SMA port as the transmitter
-    gpios.gpio_tx_sw = 1      # 0=OUT2, 1=OUT1
-    gpios.gpio_vctrl_2 = 1    # 1=Send LO to transmit circuitry
-elif SignalSource == 'OUT2':  # use OUT2 as the transmitter
-    gpios.gpio_tx_sw = 0      # 0=OUT2, 1=OUT1
-    gpios.gpio_vctrl_2 = 1    # 1=Send LO to transmit circuitry
-else:   # use HB100 as the transmit signal source
-    gpios.gpio_tx_sw = 0 
-    SDR.SDR_setTx(sdr, -80) # disable tx output by attenuating it
-
-
-# =============================================================================
-# Define Common Functions
-# =============================================================================
-def ConvertPhaseToSteerAngle(PhDelta):
-        # steering angle theta = arcsin(c*deltaphase/(2*pi*f*d)
-    value1 = (c * np.radians(np.abs(PhDelta))) / (
-        2 * 3.14159 * (SignalFreq) * d)
-    clamped_value1 = max(min(1, value1), -1)  # arcsin argument must be between 1 and -1
-    theta = np.degrees(np.arcsin(clamped_value1))
-    if PhDelta >= 0:
-        SteerAngle = theta  # positive PhaseDelta covers 0deg to 90 deg
-    else:
-        SteerAngle = -theta  # negative phase delta covers 0 deg to -90 deg
-    return SteerAngle
-
-def dbfs(raw_data):
-    # function to convert IQ samples to FFT plot, scaled in dBFS
-    NumSamples = len(raw_data)
-    win = np.hamming(NumSamples)
-    y = raw_data * win
-    s_fft = np.fft.fft(y) / np.sum(win)
-    s_shift = np.fft.fftshift(s_fft)
-    s_dbfs = 20*np.log10(np.abs(s_shift)/(2**11))     # Pluto is a signed 12 bit ADC, so use 2^11 to convert to dBFS
-    return s_dbfs
-
-
-# =============================================================================================
-# Loop through all the steering angles and record the peak FFT amplitude at each steering angle
-# =============================================================================================
-angles = []       # stores the list of steering angles
-peak_gains = []   # stores the peak FFT gain received for each steering angle
-
-steering_step = 1  # steering angle step size (in degrees)
-SteerValues = np.arange(-90, 90 + steering_step, steering_step)
-# Phase delta = 2*Pi*d*sin(theta)/lambda = 2*Pi*d*sin(theta)*f/c
-PhaseValues = np.degrees(
-    2*np.pi*d* np.sin(np.radians(SteerValues))
-    * SignalFreq / c
-)
-
-for PhDelta in PhaseValues:
-    ADAR.ADAR_set_Phase(
-        rx_array,
-        PhDelta,
-        phase_step_size,
-        phaseList
-    )
-    
-    data = sdr.rx()
-    data_sum = data[0]+data[1]
-    sum_dbfs = dbfs(data_sum)
-    peak_dbfs = max(sum_dbfs)
-    angles.append(ConvertPhaseToSteerAngle(PhDelta))
-    peak_gains.append(peak_dbfs)
-    
-    
-# =============================================================================
-# Plotting results
-# =============================================================================
-
-plt.figure(1)
-plt.subplot(2, 1, 1)
-plt.title("Beam sweep plot")
-plt.plot(angles, peak_gains, marker="o", ms=2)
-plt.xlabel("Steering angle (deg)")
-plt.ylabel("Peak Amplitude (dBFS)")
-plt.tight_layout()
-plt.show()
-
-    
-