86 lines
3.0 KiB
Matlab
86 lines
3.0 KiB
Matlab
function [rxamp,rxphase] = helperSimulateAntennaSteering(fctransmit,rxpos,txpos,steerangle,analogweight,digitalweight,nullangle)
|
|
% This helper function simulates antenna steering for the ADI workshop.
|
|
% analogweight and digitalweight are optional inputs that default to 1.
|
|
arguments
|
|
fctransmit (1,1) double
|
|
rxpos (3,1) double
|
|
txpos (3,1) double
|
|
steerangle (1,:) double
|
|
analogweight (4,2) double = ones(4,2)
|
|
digitalweight (2,1) double = ones(2,1)
|
|
nullangle = []
|
|
end
|
|
|
|
% Setup the transmitter
|
|
txelement = phased.IsotropicAntennaElement;
|
|
radiator = phased.Radiator("Sensor",txelement,"OperatingFrequency",fctransmit);
|
|
|
|
% Setup the Phased Array Receiver based on the Phaser specs
|
|
frange = [10.0e9 10.5e9];
|
|
sampleRate = 30e6;
|
|
nsamples = 1024;
|
|
element = phased.IsotropicAntennaElement('FrequencyRange',frange);
|
|
hRange = freq2wavelen(frange);
|
|
spacing = hRange(2)/2;
|
|
subarrayElements = 4;
|
|
subarray = phased.ULA('Element',element,'NumElements',subarrayElements,'ElementSpacing',spacing);
|
|
array = phased.ReplicatedSubarray('Subarray',subarray,'GridSize',[1,2],"SubarraySteering","Custom");
|
|
collector = phased.Collector("Sensor",array,"OperatingFrequency",fctransmit,"WeightsInputPort",true);
|
|
|
|
% CW signal is used
|
|
signal = ones(nsamples,1);
|
|
|
|
% Set up a channel for radiating signal
|
|
channel = phased.FreeSpace("OperatingFrequency",fctransmit,"SampleRate",sampleRate);
|
|
|
|
% Setup geometry
|
|
rxvel = [0;0;0];
|
|
txvel = [0;0;0];
|
|
[~,ang] = rangeangle(rxpos,txpos);
|
|
|
|
% Radiate signal
|
|
sigtx = radiator(signal,ang);
|
|
|
|
% Propagate signal
|
|
sigtx = channel(sigtx,txpos,rxpos,txvel,rxvel);
|
|
|
|
% Create steering vector for the two subarray channels
|
|
steervec = phased.SteeringVector("SensorArray",array);
|
|
substeervec = phased.SteeringVector("SensorArray",subarray);
|
|
|
|
% Receive signal while steering beam
|
|
rxphase = zeros(1,numel(steerangle));
|
|
rxamp = zeros(1,numel(steerangle));
|
|
for steer = steerangle
|
|
% Create the subarray weights.
|
|
singlesubweight = substeervec(fctransmit,steer);
|
|
|
|
% Create the replicated array weights
|
|
repweight = steervec(fctransmit,steer);
|
|
|
|
% insert a null if a null angle was passed in
|
|
if ~isempty(nullangle)
|
|
% Null the subarray
|
|
nullsubweight = substeervec(fctransmit,nullangle);
|
|
singlesubweight = getNullSteer(singlesubweight,nullsubweight);
|
|
|
|
% null the replicated array
|
|
nullrepweight = steervec(fctransmit,nullangle);
|
|
repweight = getNullSteer(repweight,nullrepweight);
|
|
end
|
|
|
|
% Create the full subarray weights
|
|
subweight = [singlesubweight,singlesubweight] .* analogweight;
|
|
|
|
% Receive the signal
|
|
sigreceive = collector(sigtx,[0;0],repweight,subweight) * digitalweight;
|
|
rxphase(steer == steerangle) = mean(rad2deg(angle(sigreceive)));
|
|
rxamp(steer == steerangle) = mean(abs(sigreceive));
|
|
end
|
|
|
|
end
|
|
|
|
function nullsteer = getNullSteer(steerweight,nullweight)
|
|
rn = nullweight'*steerweight/(nullweight'*nullweight);
|
|
nullsteer = steerweight-nullweight*rn;
|
|
end |