125 lines
3.6 KiB
C++
125 lines
3.6 KiB
C++
#include "Command.h"
|
|
#include <Wire.h>
|
|
#include <WiFi.h>
|
|
#include <AsyncUDP.h> //引用以使用异步UDP
|
|
#include "Kalman.h" // Source: https://github.com/TKJElectronics/KalmanFilter
|
|
#include "EEPROM.h"
|
|
Kalman kalmanZ;
|
|
#define gyroZ_OFF 0.9
|
|
/* ----IMU Data---- */
|
|
|
|
double accX, accY, accZ;
|
|
double gyroX, gyroY, gyroZ;
|
|
int16_t tempRaw;
|
|
bool stable = 0;
|
|
uint32_t last_unstable_time;
|
|
|
|
double gyroZangle; // Angle calculate using the gyro only
|
|
double compAngleZ; // Calculated angle using a complementary filter
|
|
double kalAngleZ; // Calculated angle using a Kalman filter
|
|
|
|
uint32_t timer;
|
|
uint8_t i2cData[14]; // Buffer for I2C data
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
// kalman mpu6050 init
|
|
Wire.begin(19, 18, 400000); // Set I2C frequency to 400kHz
|
|
i2cData[0] = 7; // Set the sample rate to 1000Hz - 8kHz/(7+1) = 1000Hz
|
|
i2cData[1] = 0x00; // Disable FSYNC and set 260 Hz Acc filtering, 256 Hz Gyro filtering, 8 KHz sampling
|
|
i2cData[2] = 0x00; // Set Gyro Full Scale Range to ±250deg/s
|
|
i2cData[3] = 0x00; // Set Accelerometer Full Scale Range to ±2g
|
|
while (i2cWrite(0x19, i2cData, 4, false))
|
|
; // Write to all four registers at once
|
|
while (i2cWrite(0x6B, 0x01, true))
|
|
; // PLL with X axis gyroscope reference and disable sleep mode
|
|
|
|
while (i2cRead(0x75, i2cData, 1))
|
|
;
|
|
if (i2cData[0] != 0x68)
|
|
{ // Read "WHO_AM_I" register
|
|
Serial.print(F("Error reading sensor"));
|
|
while (1)
|
|
;
|
|
}
|
|
|
|
delay(100); // Wait for sensor to stabilize
|
|
|
|
/* Set kalman and gyro starting angle */
|
|
while (i2cRead(0x3B, i2cData, 6))
|
|
;
|
|
accX = (int16_t)((i2cData[0] << 8) | i2cData[1]);
|
|
accY = (int16_t)((i2cData[2] << 8) | i2cData[3]);
|
|
accZ = (int16_t)((i2cData[4] << 8) | i2cData[5]);
|
|
double pitch = acc2rotation(accX, accY);
|
|
|
|
kalmanZ.setAngle(pitch);
|
|
gyroZangle = pitch;
|
|
|
|
timer = micros();
|
|
Serial.println("kalman mpu6050 init");
|
|
}
|
|
|
|
void loop() {
|
|
while (i2cRead(0x3B, i2cData, 14));
|
|
accX = (int16_t)((i2cData[0] << 8) | i2cData[1]);
|
|
accY = (int16_t)((i2cData[2] << 8) | i2cData[3]);
|
|
accZ = (int16_t)((i2cData[4] << 8) | i2cData[5]);
|
|
tempRaw = (int16_t)((i2cData[6] << 8) | i2cData[7]);
|
|
gyroX = (int16_t)((i2cData[8] << 8) | i2cData[9]);
|
|
gyroY = (int16_t)((i2cData[10] << 8) | i2cData[11]);
|
|
gyroZ = (int16_t)((i2cData[12] << 8) | i2cData[13]);
|
|
|
|
double dt = (double)(micros() - timer) / 1000000; // Calculate delta time
|
|
timer = micros();
|
|
|
|
double pitch = acc2rotation(accX, accY);
|
|
double gyroZrate = gyroZ / 131.0; // Convert to deg/s
|
|
|
|
kalAngleZ = kalmanZ.getAngle(pitch, gyroZrate + gyroZ_OFF, dt);
|
|
gyroZangle += (gyroZrate + gyroZ_OFF) * dt;
|
|
compAngleZ = 0.93 * (compAngleZ + (gyroZrate + gyroZ_OFF) * dt) + 0.07 * pitch;
|
|
|
|
// // Reset the gyro angle when it has drifted too much
|
|
// if (gyroZangle < -180 || gyroZangle > 180)
|
|
// gyroZangle = kalAngleZ;
|
|
|
|
Serial.print(pitch); Serial.print("\t");
|
|
// Serial.print(gyroZrate); Serial.print("\t");
|
|
// Serial.print(kalAngleZ); Serial.print("\t");
|
|
// Serial.print(gyroZangle); Serial.print("\t");
|
|
Serial.print(compAngleZ); Serial.print("\t");
|
|
Serial.print("\r\n");
|
|
}
|
|
/* mpu6050加速度转换为角度
|
|
acc2rotation(ax, ay)
|
|
acc2rotation(az, ay) */
|
|
double acc2rotation(double x, double y)
|
|
{
|
|
if (y < 0)
|
|
{
|
|
return atan(x / y) / 1.570796 * 90 + 180;
|
|
}
|
|
else if (x < 0)
|
|
{
|
|
return (atan(x / y) / 1.570796 * 90 + 360);
|
|
}
|
|
else
|
|
{
|
|
return (atan(x / y) / 1.570796 * 90);
|
|
}
|
|
}
|
|
|
|
// function constraining the angle in between -60~60
|
|
float constrainAngle(float x)
|
|
{
|
|
float a = 0;
|
|
if (x < 0)
|
|
{
|
|
a = 120 + x;
|
|
if (a < abs(x))
|
|
return a;
|
|
}
|
|
return x;
|
|
}
|