ExtendedPathIterator (mxGraph 3.4.0.0 API Specification)

```
public interface ExtendedPathIterator
```
The ExtendedPathIterator class represents a geometric path constructed from straight lines, quadratic and cubic (Bezier) curves and elliptical arcs. This interface is identical to that of PathIterator except it can return SEG_ARCTO from currentSegment, also the array of values passed to currentSegment must be of length 7 or an error will be thrown. This does not extend PathIterator as it would break the interface contract for that class.

Field Summary

Fields
Modifier and Type	Field and Description
`static int`	`SEG_ARCTO` The segment type constant for an elliptical arc.
`static int`	`SEG_CLOSE` The segment type constant that specifies that the preceding subpath should be closed by appending a line segment back to the point corresponding to the most recent SEG_MOVETO.
`static int`	`SEG_CUBICTO` The segment type constant for the set of 3 points that specify a cubic parametric curve to be drawn from the most recently specified point.
`static int`	`SEG_LINETO` The segment type constant for a point that specifies the end point of a line to be drawn from the most recently specified point.
`static int`	`SEG_MOVETO` The segment type constant for a point that specifies the end point of a line to be drawn from the most recently specified point.
`static int`	`SEG_QUADTO` The segment type constant for the pair of points that specify a quadratic parametric curve to be drawn from the most recently specified point.
`static int`	`WIND_EVEN_ODD` The winding rule constant for specifying an even-odd rule for determining the interior of a path.
`static int`	`WIND_NON_ZERO` The winding rule constant for specifying a non-zero rule for determining the interior of a path.

Method Summary

Methods
Modifier and Type	Method and Description
`int`	`currentSegment()`
`int`	`currentSegment(double[] coords)`
`int`	`currentSegment(float[] coords)`
`int`	`getWindingRule()`
`boolean`	`isDone()`
`void`	`next()`

- Field Detail
  - SEG_CLOSE
```
static final int SEG_CLOSE
```
    The segment type constant that specifies that the preceding subpath should be closed by appending a line segment back to the point corresponding to the most recent SEG_MOVETO.
    
    See Also:
    Constant Field Values
  - SEG_MOVETO
```
static final int SEG_MOVETO
```
    The segment type constant for a point that specifies the end point of a line to be drawn from the most recently specified point.
    
    See Also:
    Constant Field Values
  - SEG_LINETO
```
static final int SEG_LINETO
```
    The segment type constant for a point that specifies the end point of a line to be drawn from the most recently specified point.
    
    See Also:
    Constant Field Values
  - SEG_QUADTO
```
static final int SEG_QUADTO
```
    The segment type constant for the pair of points that specify a quadratic parametric curve to be drawn from the most recently specified point. The curve is interpolated by solving the parametric control equation in the range (t=[0..1]) using the most recently specified (current) point (CP), the first control point (P1), and the final interpolated control point (P2).
    
    See Also:
    Constant Field Values
  - SEG_CUBICTO
```
static final int SEG_CUBICTO
```
    The segment type constant for the set of 3 points that specify a cubic parametric curve to be drawn from the most recently specified point. The curve is interpolated by solving the parametric control equation in the range (t=[0..1]) using the most recently specified (current) point (CP), the first control point (P1), the second control point (P2), and the final interpolated control point (P3).
    
    See Also:
    Constant Field Values
  - SEG_ARCTO
```
static final int SEG_ARCTO
```
    The segment type constant for an elliptical arc. This consists of Seven values [rx, ry, angle, largeArcFlag, sweepFlag, x, y]. rx, ry are the radious of the ellipse. angle is angle of the x axis of the ellipse. largeArcFlag is zero if the smaller of the two arcs are to be used. sweepFlag is zero if the 'left' branch is taken one otherwise. x and y are the destination for the ellipse.
    
    See Also:
    Constant Field Values
  - WIND_EVEN_ODD
```
static final int WIND_EVEN_ODD
```
    The winding rule constant for specifying an even-odd rule for determining the interior of a path. The even-odd rule specifies that a point lies inside the path if a ray drawn in any direction from that point to infinity is crossed by path segments an odd number of times.
    
    See Also:
    Constant Field Values
  - WIND_NON_ZERO
```
static final int WIND_NON_ZERO
```
    The winding rule constant for specifying a non-zero rule for determining the interior of a path. The non-zero rule specifies that a point lies inside the path if a ray drawn in any direction from that point to infinity is crossed by path segments a different number of times in the counter-clockwise direction than the clockwise direction.
    
    See Also:
    Constant Field Values
- Method Detail
  - currentSegment
```
int currentSegment()
```
  - currentSegment
```
int currentSegment(double[] coords)
```
  - currentSegment
```
int currentSegment(float[] coords)
```
  - getWindingRule
```
int getWindingRule()
```
  - isDone
```
boolean isDone()
```
  - next
```
void next()
```

Interface ExtendedPathIterator

Field Summary

Method Summary

Field Detail

SEG_CLOSE

SEG_MOVETO

SEG_LINETO

SEG_QUADTO

SEG_CUBICTO

SEG_ARCTO

WIND_EVEN_ODD

WIND_NON_ZERO

Method Detail

currentSegment

currentSegment

currentSegment

getWindingRule

isDone

next