From ab4678fc23a177d5d772f3df7b83b6ca91a7c15a Mon Sep 17 00:00:00 2001 From: Thorsten Liebig Date: Wed, 12 Dec 2012 22:27:47 +0100 Subject: [PATCH] doc: update to lumped port doc Signed-off-by: Thorsten Liebig --- matlab/AddLumpedPort.m | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/matlab/AddLumpedPort.m b/matlab/AddLumpedPort.m index 26a510e..faf8bd7 100644 --- a/matlab/AddLumpedPort.m +++ b/matlab/AddLumpedPort.m @@ -3,10 +3,13 @@ function [CSX, port] = AddLumpedPort( CSX, prio, portnr, R, start, stop, dir, ex % % Add a 3D lumped port as an excitation. % +% A lumped port consists of an excitation, a lumped resistor, a voltage and +% current probe. +% % CSX: CSX-object created by InitCSX() % prio: priority for substrate and probe boxes % portnr: (integer) number of the port -% R: internal resistance of the port +% R: internal resistance of the port (lumped element) % start: 3D start rowvector for port definition % stop: 3D end rowvector for port definition % dir: direction/amplitude of port (e.g.: [1 0 0], [0 1 0] or [0 0 1]) @@ -18,7 +21,7 @@ function [CSX, port] = AddLumpedPort( CSX, prio, portnr, R, start, stop, dir, ex % start = [-0.1 -width/2 0]; % stop = [ 0.1 width/2 height]; % [CSX] = AddLumpedPort(CSX, 5 ,1 , 50, start, stop, [0 0 1], 'excite'); -% this defines a lumped port in z-direction (dir) +% this defines a lumped port in z-direction with a 50 Ohm port impedence % % openEMS matlab interface % -----------------------