examples adapted to win32

TESTSUITE/helperscripts/invoke_openEMS.m

@@ -1,15 +0,0 @@
-function invoke_openEMS( opts )
-
-if nargin < 1
-    opts = '';
-end
-% openEMS_opts = [openEMS_opts ' --disable-dumps'];
-% openEMS_opts = [openEMS_opts ' --debug-material'];
-
-filename = mfilename('fullpath');
-dir = fileparts( filename );
-openEMS_Path = [dir '/../../'];
-
-command = [openEMS_Path 'openEMS.sh ' opts];
-disp(command);
-system(command);

matlab/examples/Circ_Waveguide.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear all;
+clear
 clc
 
 %% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -18,7 +18,7 @@ f0 = 400e6;
 p11 = 1.841;
 kc = p11 / rad /unit;
 k = 2*pi*f0/C0;
-fc = C0*kc/2/pi
+fc = C0*kc/2/pi;
 beta = sqrt(k^2 - kc^2);
 
 kc = kc*unit;
@@ -28,8 +28,7 @@ func_Ea = [ num2str(1/kc) '*sin(a)*0.5*(j0('  num2str(kc) '*rho)-jn(2,'  num2str
 func_Ex = [func_Er '*cos(a) - ' func_Ea '*sin(a)'];
 func_Ey = [func_Er '*sin(a) + ' func_Ea '*cos(a)'];
 
-%% define file pathes and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% define and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-openEMS_Path = [pwd() '/../../']
 openEMS_opts = '';
 % openEMS_opts = [openEMS_opts ' --disable-dumps'];
 % openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -110,21 +109,14 @@ CSX = AddProbe(CSX,'ut1',0);
 start = [ -rad 0 0/2 ];stop = [ rad 0 0/2 ];
 CSX = AddBox(CSX,'ut1', 0 ,start,stop);
 
-%current calc
-CSX = AddProbe(CSX,'it1',1);
-mid = 0.5*(coax_rad_i+coax_rad_ai);
-start = [ -mid -mid length/2 ];stop = [ mid mid length/2 ];
-CSX = AddBox(CSX,'it1', 0 ,start,stop);
-
 %% Write openEMS compatoble xml-file %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 
 %% cd to working dir and run openEMS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 savePath = pwd();
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args);
-system(command)
 cd(savePath);
 
 %% do the plots %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

matlab/examples/Circ_Waveguide_CylinderCoords.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear all;
+clear
 clc
 
 %% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -22,15 +22,14 @@ f0 = 400e6;
 p11 = 1.841;
 kc = p11 / rad /unit;
 k = 2*pi*f0/C0;
-fc = C0*kc/2/pi
+fc = C0*kc/2/pi;
 beta = sqrt(k^2 - kc^2);
 
 kc = kc*unit;
 func_Er = [ num2str(-1/kc^2,15) '/rho*cos(a)*j1('  num2str(kc,15) '*rho)'];
 func_Ea = [ num2str(1/kc,15) '*sin(a)*0.5*(j0('  num2str(kc,15) '*rho)-jn(2,'  num2str(kc,15) '*rho))'];
 
-%% define file pathes and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% define openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-openEMS_Path = [pwd() '/../../']
 openEMS_opts = '';
 % openEMS_opts = [openEMS_opts ' --disable-dumps'];
 % openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -117,9 +116,8 @@ WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 %% cd to working dir and run openEMS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 savePath = pwd();
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args);
-system(command)
 cd(savePath);
 
 %% do the plots %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -153,4 +151,4 @@ for z =z_planes
         Ex(10,5)
         pause(1)
     end
-end
+end

matlab/examples/Coax.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear all;
+clear
 clc
 
 %% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -18,8 +18,7 @@ Z0 = sqrt(MUE0/EPS0);
 f0 = 0.5e9;
 epsR = 1;
 
-%% define file pathes and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% define openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-openEMS_Path = [pwd() '/../../']
 openEMS_opts = '';
 openEMS_opts = [openEMS_opts ' --disable-dumps'];
 % openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -98,9 +97,8 @@ WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 %% cd to working dir and run openEMS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 savePath = pwd();
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args)
-system(command)
 cd(savePath);
 
 %% postproc & do the plots %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

matlab/examples/Coax_CylinderCoords.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear all;
+clear
 clc
 
 %% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -21,8 +21,7 @@ max_alpha = max_mesh;
 N_alpha = ceil(rad_a * 2*pi / max_alpha);
 mesh_res = [max_mesh 2*pi/N_alpha max_mesh];
 
-%% define file pathes and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% define and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-openEMS_Path = [pwd() '/../../'];
 openEMS_opts = '';
 openEMS_opts = [openEMS_opts ' --disable-dumps'];
 % openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -107,9 +106,8 @@ WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 %% cd to working dir and run openEMS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 savePath = pwd();
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args);
-system(command)
 cd(savePath);
 
 %% postproc & do the plots %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -129,5 +127,3 @@ plot(UI.FD{1}.f,real(Z),'Linewidth',2);
 plot(UI.FD{1}.f,imag(Z),'r','Linewidth',2);
 xlim([0 2*f0]);
 legend('Z_L','\Re\{Z\}','\Im\{Z\}','Location','Best');
-
-

matlab/examples/Coax_partial_CylinderCoords.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear all;
+clear
 clc
 
 EPS0 = 8.85418781762e-12;
@@ -21,7 +21,6 @@ max_alpha = max_mesh;
 N_alpha = ceil(rad_a * 2*pi * partial / max_alpha);
 mesh_res = [max_mesh 2*pi*partial/N_alpha max_mesh];
 
-openEMS_Path = [pwd() '/../../']
 openEMS_opts = '';
 openEMS_opts = [openEMS_opts ' --disable-dumps'];
 % openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -105,9 +104,8 @@ WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 %cd to working dir and run openEMS
 savePath = pwd();
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args)
-system(command)
 cd(savePath);
 
 UI = ReadUI({'ut1_1','ut1_2','it1'},'tmp/');

matlab/examples/Helix.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear;
+clear
 clc
 
 %% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -16,8 +16,7 @@ port_resist = 1000;
 f_max = 100e6;
 f_excite = 300e6;
 
-%% define file pathes and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% define openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-openEMS_Path = [pwd() '/../../']
 openEMS_opts = '';
 % openEMS_opts = [openEMS_opts ' --disable-dumps'];
 openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -27,8 +26,8 @@ openEMS_opts = [openEMS_opts ' --debug-boxes'];
 Sim_Path = 'tmp';
 Sim_CSX = 'helix.xml';
 
-rmdir(Sim_Path,'s');
+[status, message, messageid] = rmdir(Sim_Path,'s');
-mkdir(Sim_Path);
+[status,message,messageid] = mkdir(Sim_Path);
 
 %% setup FDTD parameter & excitation function %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 FDTD = InitFDTD(30000,1e-6);
@@ -120,11 +119,10 @@ CSX = AddBox(CSX,'Ht_',0 , start,stop);
 WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 
 %% cd to working dir and run openEMS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-savePath = pwd();
+savePath = pwd;
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args);
-system(command)
 cd(savePath);
 
 %% postproc & do the plots %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

matlab/examples/MSL.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear all;
+clear
 clc
 
 %% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -14,8 +14,7 @@ mesh_res = [5 5 10];
 EPS0 = 8.85418781762e-12;
 MUE0 = 1.256637062e-6;
 
-%% define file pathes and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% define openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-openEMS_Path = [pwd() '/../../']
 openEMS_opts = '';
 % openEMS_opts = [openEMS_opts ' --disable-dumps'];
 % openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -86,8 +85,7 @@ WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 %% cd to working dir and run openEMS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 savePath = pwd();
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args);
-system(command)
 cd(savePath);
 

matlab/examples/PlaneWave.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear all;
+clear
 clc
 
 %% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -12,8 +12,7 @@ mesh_res = 25;
 EPS0 = 8.85418781762e-12;
 MUE0 = 1.256637062e-6;
 
-%% define file pathes and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% define openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-openEMS_Path = [pwd() '/../../']
 openEMS_opts = '';
 % openEMS_opts = [openEMS_opts ' --disable-dumps'];
 % openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -25,7 +24,7 @@ Sim_CSX = 'plane_wave.xml';
 mkdir(Sim_Path);
 
 %% setup FDTD parameter & excitation function %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-FDTD = InitFDTD(5e5,1e-6,'OverSampling',10);
+FDTD = InitFDTD(5e5,1e-5,'OverSampling',10);
 FDTD = SetGaussExcite(FDTD,0.5e9,0.5e9);
 BC = [1 1 0 0 0 0];
 FDTD = SetBoundaryCond(FDTD,BC);
@@ -71,9 +70,8 @@ WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 %% cd to working dir and run openEMS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 savePath = pwd();
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args);
-system(command)
 cd(savePath);
 
 %% do the plots %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -83,4 +81,3 @@ PlotArgs.component=2;
 PlotArgs.Limit = 'auto';
 
 PlotHDF5FieldData('tmp/Et.h5',PlotArgs)
-

matlab/examples/Rect_Waveguide.m

@@ -1,5 +1,5 @@
-close all;
+close all
-clear all;
+clear
 clc
 
 %% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -24,14 +24,13 @@ f0 = 1e9;
 
 k = 2*pi*f0/C0;
 kc = sqrt((m*pi/a/unit)^2 + (n*pi/b/unit)^2);
-fc = C0*kc/2/pi
+fc = C0*kc/2/pi;
 beta = sqrt(k^2 - kc^2);
 
 func_Ex = [num2str(n/b/unit) '*cos(' num2str(m*pi/a) '*x)*sin('  num2str(n*pi/b) '*y)'];
 func_Ey = [num2str(m/a/unit) '*sin(' num2str(m*pi/a) '*x)*cos('  num2str(n*pi/b) '*y)'];
 
-%% define file pathes and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% define and openEMS options %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-openEMS_Path = [pwd() '/../../']
 openEMS_opts = '';
 % openEMS_opts = [openEMS_opts ' --disable-dumps'];
 % openEMS_opts = [openEMS_opts ' --debug-material'];
@@ -95,9 +94,8 @@ WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
 %% cd to working dir and run openEMS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 savePath = pwd();
 cd(Sim_Path); %cd to working dir
-command = [openEMS_Path 'openEMS.sh ' Sim_CSX ' ' openEMS_opts];
+args = [Sim_CSX ' ' openEMS_opts];
-disp(command);
+invoke_openEMS(args);
-system(command)
 cd(savePath);
 
 %% do the plots %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -107,4 +105,3 @@ PlotArgs.component=2;
 PlotArgs.Limit = 'auto';
 
 PlotHDF5FieldData('tmp/Et.h5',PlotArgs)
-

matlab/invoke_openEMS.m

@@ -0,0 +1,25 @@
+function invoke_openEMS( opts )
+
+if nargin < 1
+    error 'specify the xml file to simulate'
+end
+
+% opts = [opts ' --disable-dumps'];
+% opts = [opts ' --debug-material'];
+% opts = [opts ' --debug-boxes'];
+% opts = [opts ' --engine=sse'];
+% opts = [opts ' --engine=multithreaded'];
+
+filename = mfilename('fullpath');
+dir = fileparts( filename );
+openEMS_Path = [dir filesep '..' filesep];
+    
+if isunix
+	openEMS_Path = [openEMS_Path 'openEMS.sh'];
+else
+	openEMS_Path = [openEMS_Path 'openEMS'];
+end
+
+command = [openEMS_Path ' ' opts];
+disp( ['invoking openEMS simulator: ' command] );
+system(command);