ab682cc0bd
A few fixes for MPI
...
main.cpp:
1. Check return value of ParseFDTDSetup and exit if false
2. Use exit instead of return. These are almost identical. But
in my OpenMPI installation the process with teh highes rank
segfaults at the end when using return. This is not the case
with exit. Probably some C++ cleanup problem (destructors).
openems.cpp:
Give Parse_XML_FDTDSetup a deterministic return value.
openems_fdtd_mpi.cpp:
1. Remove the word "only" in an error message because there can
also be too many processes.
2. Fix the indexing variables for SetSplitPos in SetupMPI. Otherwise
more than one split results in an out-of-range exception and
unexpected behavior.
RunOpenEMS_MPI.m:
Apply Settings.MPI.GlobalArgs also to multi-host scenarios.
2016-12-02 19:03:35 +01:00
765490d7a3
cricital bug fix for mode matching probes
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2016-11-15 20:13:18 +01:00
bb3e73f6bf
fix default over sampling
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2016-07-30 22:04:15 +02:00
d75069cfef
MPI: update for MPI usage
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2016-01-27 18:37:07 +01:00
18e21d5fa0
check and update CSXCAD during setup
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-30 14:17:56 +01:00
22093a6347
get BC type and PML size
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-30 14:17:40 +01:00
2572398482
move welcome screen and show usage to openEMS lib
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-19 15:38:21 +01:00
d439926992
openEMS: check if an excitation was defined
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-19 15:03:30 +01:00
e4ad3dba0f
openEMS: set verbose level method
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-19 15:03:17 +01:00
ad02096df5
openEMS: simple interface to create a Gaussian pulse excitation
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-19 15:03:02 +01:00
205c1546f6
fix boundary conditions
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-15 22:13:54 +01:00
6140b07c47
main: more flexible FDTD setup
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-13 22:33:26 +01:00
38ff1ce28c
improve default steady state probe positions
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-09-29 19:57:21 +02:00
9c80672855
excitation: store only 2 periods of periodic excitations
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-09-03 22:53:31 +02:00
f06cc293dc
remove using namespace std from header files
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-06-18 21:45:22 +02:00
cd1db5d21b
operator: new steady state detection operator extension
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-05-04 20:47:19 +02:00
988198f968
add start/stop time for probe and dump boxes
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-03-06 21:38:27 +01:00
865e817de7
bug fix: get max freq from xml to setup conducting sheet model
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-04-08 21:32:18 +02:00
6f6ed4feac
critical fix: use new Operator->GetEngine for engine interface setup
...
Bug fix: engine interfaces for multigrids were using subgrid operator,
but main grid engine...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-06 16:08:13 +01:00
3fc2a41af9
operator: change how to average material to allow for overloaded cylindrical handling
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-28 21:02:49 +01:00
6892a0c589
support for multigrid level request of dump boxes
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-19 15:15:36 +01:00
ad7d3a5ca3
change in how the flag "CellConstantMaterial" is handled
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-08-23 17:29:10 +02:00
6c248efa3a
SAR: use cell based conductivity in all cases (new default)
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-08-23 17:28:18 +02:00
a607bc6969
more options to setup SAR averaging method
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-05-15 16:02:30 +02:00
c65b5df785
typo: replace Operator_Ext_TFST with Operator_Ext_TFSF
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-04-12 16:07:39 +02:00
b8f1184071
remove old and unused split-field pml
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-04-12 14:26:26 +02:00
816553fc34
Operator: allow to choose time stepping method
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 11:58:24 +01:00
e113afb656
new: support debye dispersive material
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-19 14:02:06 +01:00
8d5043bd44
operator: alternative material averaging method
...
If constant cell material is activated, material probing is performed
only in the center of a primary cell.
This should improve and simplify SAR calculation if all materials
are assumed as constant within a primary YEE cell.
Usage from Matlab/Octave:
FDTD = InitFDTD('CellConstantMaterial',1);
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-02-18 10:38:55 +01:00
01ada0cdb6
do not store averaged kappa for RAW-SAR dump
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-02-06 16:47:18 +01:00
944fd3c528
SAR fix missing conductivity storage
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-01-30 14:15:35 +01:00
3b44620278
current probes can be a point or line which allows for 1D/2D lumped ports
...
- this needs the new probe box interface in CSXCAD
- most tutorials have been updated
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-01-22 09:22:01 +01:00
e6c0444985
CSXCAD: match recent version with split files for primitives and properties
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-12-03 13:59:39 +01:00
c536e1f344
process fields: new SAR calculation
...
todo: needs much testing and evaluation
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-11-29 16:45:48 +01:00
f11b98ecf4
remove dependency on H5Cpp.h
2012-11-11 17:57:36 +01:00
d64e43a73c
run post processing after final time evaluation
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-11-06 12:46:54 +01:00
0022996df6
FDTD: new argument to reduce the used timestep by a given factor
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-09-27 14:20:20 +02:00
2f228f2161
update & fix to FDTD simulation statistics
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-09-25 11:24:25 +02:00
2966ba2902
new option to dump FDTD simulation statistics
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-09-24 15:16:47 +02:00
943995c48c
TFSF: disable for (currently) unsupported cylindrical mesh
2012-07-25 10:50:56 +02:00
df083a63cc
excitation: save & get some important frequencies
2012-07-23 12:09:16 +02:00
be8a3fbc51
new extension: total-field/scattered-field excitation
...
See new matlab tutorial: RCS_Sphere.m
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-07-18 13:12:25 +02:00
ad90817a50
continued (internal) reorganization of excitation
2012-07-17 13:23:00 +02:00
e20121540f
reorganization and cleanup of excitation handling
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-07-16 17:15:10 +02:00
317ef82993
new FDTD extension: conducting sheet model
2012-05-08 13:58:20 +02:00
3abe10848d
dispersive material: critical bug fixes
2012-04-27 16:47:27 +02:00
afd11bcc4a
read number of timesteps as float to better support scientific notation
2012-01-17 11:35:00 +01:00
2cbdf2d2b2
timestep length warning only for gaussian pulse excitation type
2012-01-17 11:31:53 +01:00
488772de25
removed misleading timestep progress information, warning about to few timesteps instead
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-01-17 10:22:16 +01:00
aaeb103c57
fparser external lib reference added
2011-11-28 11:58:41 +01:00
Thorsten Liebig
Sebastian Held