a8c0d0bede
FDTD: fix sse/sse_compressed engine creation
...
ref. 6353c70a
2018-01-04 10:06:29 +01:00
6133dea5b0
add field processing for electric and magnetic flux densities
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2017-05-28 12:01:04 +02:00
ff6920f3a8
FDTD: fix excitation signal length calculation and handling
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2017-02-11 18:17:54 +01:00
d8677b100d
forgot an << endl;
2016-12-10 14:06:42 +01:00
b32cf1fb62
clarified a warning for MPI
2016-12-10 12:35:36 +01:00
ab682cc0bd
A few fixes for MPI
...
main.cpp:
1. Check return value of ParseFDTDSetup and exit if false
2. Use exit instead of return. These are almost identical. But
in my OpenMPI installation the process with teh highes rank
segfaults at the end when using return. This is not the case
with exit. Probably some C++ cleanup problem (destructors).
openems.cpp:
Give Parse_XML_FDTDSetup a deterministic return value.
openems_fdtd_mpi.cpp:
1. Remove the word "only" in an error message because there can
also be too many processes.
2. Fix the indexing variables for SetSplitPos in SetupMPI. Otherwise
more than one split results in an out-of-range exception and
unexpected behavior.
RunOpenEMS_MPI.m:
Apply Settings.MPI.GlobalArgs also to multi-host scenarios.
2016-12-02 19:03:35 +01:00
5b2f5352eb
#if check for vtk >= 6
2016-03-21 11:35:36 +03:00
add2f2decb
fix wrong time step for cylinder mesh with r=0
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2016-02-18 22:58:07 +01:00
d5cbfec2be
MPI: fix FDTD setup for non-MPI
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2016-01-31 13:32:17 +01:00
d75069cfef
MPI: update for MPI usage
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2016-01-27 18:37:07 +01:00
8ff7ed4075
split openEMS into libopenEMS and openEMS binary
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-19 15:01:56 +01:00
6140b07c47
main: more flexible FDTD setup
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-12-13 22:33:26 +01:00
5cce4185df
improve excitation handling for periodic signals
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-09-06 10:19:01 +02:00
9c80672855
excitation: store only 2 periods of periodic excitations
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-09-03 22:53:31 +02:00
b2f5ab3c6b
improved steady state detection
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-09-03 22:35:14 +02:00
0f9f0fd830
fix: do not increase timestep to match periodic signal, only decreasing is ok!
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-09-03 21:25:49 +02:00
f06cc293dc
remove using namespace std from header files
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-06-18 21:45:22 +02:00
29ffbb66ab
cmake: improve build system and support win32
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-05-19 22:13:28 +02:00
cd1db5d21b
operator: new steady state detection operator extension
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-05-04 20:47:19 +02:00
63adb586fb
remove unused code from SSE compressed operator
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-10-27 23:09:11 +01:00
ac3dff8818
operator: speed improvement using a primitive pre-selection
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-10-19 21:59:39 +02:00
22d526f0ee
engine interface: improve interpolation for e-fields on boundary edges
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-10-09 21:08:11 +02:00
dae788a2a4
cmake: cleanup, build type for nf2ff
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-10-09 21:06:36 +02:00
480e6c430f
add CMake to openEMS
2014-09-18 21:12:50 +02:00
6da9213e62
initial support for vtk 6.x
...
run qmake with vtk-version given, e.g.:
qmake VTK_6_VERSION=6.1
or put this in localPaths.pri
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-29 14:51:00 +01:00
6f6ed4feac
critical fix: use new Operator->GetEngine for engine interface setup
...
Bug fix: engine interfaces for multigrids were using subgrid operator,
but main grid engine...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-06 16:08:13 +01:00
6353c70ae5
Operator: new method to get corresponding engine
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-06 15:40:39 +01:00
3d66de64d8
Engine interface: check for valid operator and engine
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-06 15:37:43 +01:00
3fc2a41af9
operator: change how to average material to allow for overloaded cylindrical handling
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-28 21:02:49 +01:00
87b6650f67
fix and improvemnt in getting cell center coordinate for material averaging
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-28 20:57:31 +01:00
dcf2e8c0cf
Operator: get access to cell center material averaging coordinates
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-20 15:48:04 +01:00
6a683d93d5
operator: add density as material type
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-20 15:47:28 +01:00
6892a0c589
support for multigrid level request of dump boxes
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-19 15:15:36 +01:00
2e8b2b7260
Added support for background material in CSXCAD
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-03 16:02:22 +01:00
3930db8be3
fix for curve in cylindrical coordinates and multigrids
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-03 16:02:21 +01:00
3a66a02550
fix in size of lumped elements caps
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-08-22 12:55:27 +02:00
e27e4057e1
operator: make Grid_Path a typedef struct
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-08-16 13:19:12 +02:00
6c80ad021d
pml: fix in material calculation
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-08-16 13:16:39 +02:00
37246be398
operator: additional fix to FindPath
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-06-10 10:13:58 +02:00
655cb7daed
operator: fix in handling curve primitives in cylindrical coordinates
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-06-05 14:56:34 +02:00
c65b5df785
typo: replace Operator_Ext_TFST with Operator_Ext_TFSF
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-04-12 16:07:39 +02:00
b8f1184071
remove old and unused split-field pml
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-04-12 14:26:26 +02:00
4c6294dfba
fix in conducting sheet extension, missing initialization
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-31 23:04:04 +02:00
8d8759cb1b
Operator: add optional range to DumpPEC2File to allow for separated dump in case of a multi grid cylindrical operator
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 12:02:08 +01:00
70ff8634f4
Cylindrical MultiGrid Operator: record level of multi grid
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 12:00:46 +01:00
816553fc34
Operator: allow to choose time stepping method
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 11:58:24 +01:00
6016a10fc2
Operator: use internal function to delete inactive extensions
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 11:55:39 +01:00
bd0df58253
bug fix: operator extensions copy constructor is missing copy for active flag
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 11:54:16 +01:00
e113afb656
new: support debye dispersive material
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-19 14:02:06 +01:00
57dfd64c9b
added support for Lorentz dispersive material
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-14 16:52:44 +01:00
Thorsten Liebig
Georg Michel
Dmitry Roshchin
Guilherme Brondani Torri