241 lines
9.5 KiB
Matlab
241 lines
9.5 KiB
Matlab
function [CSX,port] = AddCoaxialPort( CSX, prio, portnr, pec_name, materialname, start, stop, dir, r_i, r_o, r_os, varargin )
|
|
% function [CSX,port] = AddCoaxialPort( CSX, prio, portnr, pec_name, materialname, start, stop, dir, r_i, r_o, r_os, varargin )
|
|
%
|
|
% CSX: CSX-object created by InitCSX()
|
|
% prio: priority for excitation and probe boxes
|
|
% portnr: (integer) number of the port
|
|
% pec_name: metal property for coaxial inner/outer conductor (created by AddMetal())
|
|
% materialname: substrate property for coaxial line (created by AddMaterial())
|
|
% Note: this may be empty for an "air filled" coaxial line
|
|
% start: 3D start rowvector for coaxial cable axis
|
|
% stop: 3D end rowvector for coaxial cable axis
|
|
% dir: direction of wave propagation (choices: 0, 1, 2 or 'x','y','z')
|
|
% r_i: inner coaxial radius (in drawing unit)
|
|
% r_o: outer coaxial radius (in drawing unit)
|
|
% r_os: outer shell coaxial radius (in drawing unit)
|
|
%
|
|
% variable input:
|
|
% varargin: optional additional excitations options, see also AddExcitation
|
|
% 'ExciteAmp' excitation amplitude of transversal electric field profile,
|
|
% set to 0 (default) for a passive port
|
|
% 'FeedShift' shift to port from start by a given distance in drawing
|
|
% units. Default is 0. Only active if 'ExciteAmp' is set!
|
|
% 'Feed_R' Specify a lumped port resistance. Default is no lumped
|
|
% port resistance --> port has to end in an ABC.
|
|
% 'MeasPlaneShift' Shift the measurement plane from start t a given distance
|
|
% in drawing units. Default is the middle of start/stop.
|
|
% 'PortNamePrefix' a prefix to the port name
|
|
%
|
|
% the mesh must be already initialized
|
|
%
|
|
% example:
|
|
%
|
|
% openEMS matlab interface
|
|
% -----------------------
|
|
% Thorsten Liebig <thorsten.liebig@gmx.de> (c) 2013
|
|
%
|
|
% See also InitCSX AddMetal AddMaterial AddExcitation calcPort
|
|
|
|
%% validate arguments %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
%check mesh
|
|
if ~isfield(CSX,'RectilinearGrid')
|
|
error 'mesh needs to be defined! Use DefineRectGrid() first!';
|
|
end
|
|
if (~isfield(CSX.RectilinearGrid,'XLines') || ~isfield(CSX.RectilinearGrid,'YLines') || ~isfield(CSX.RectilinearGrid,'ZLines'))
|
|
error 'mesh needs to be defined! Use DefineRectGrid() first!';
|
|
end
|
|
|
|
% check dir
|
|
dir = DirChar2Int(dir);
|
|
|
|
%set defaults
|
|
feed_shift = 0;
|
|
feed_R = inf; %(default is open, no resitance)
|
|
excite_amp = 0;
|
|
measplanepos = nan;
|
|
PortNamePrefix = '';
|
|
|
|
excite_args = {};
|
|
|
|
%% read optional arguments %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
for n=1:2:numel(varargin)
|
|
if (strcmp(varargin{n},'FeedShift')==1);
|
|
feed_shift = varargin{n+1};
|
|
if (numel(feed_shift)>1)
|
|
error 'FeedShift must be a scalar value'
|
|
end
|
|
elseif (strcmp(varargin{n},'Feed_R')==1);
|
|
feed_R = varargin{n+1};
|
|
if (numel(feed_R)>1)
|
|
error 'Feed_R must be a scalar value'
|
|
end
|
|
elseif (strcmp(varargin{n},'MeasPlaneShift')==1);
|
|
measplanepos = varargin{n+1};
|
|
if (numel(measplanepos)>1)
|
|
error 'MeasPlaneShift must be a scalar value'
|
|
end
|
|
elseif (strcmp(varargin{n},'ExciteAmp')==1);
|
|
excite_amp = varargin{n+1};
|
|
elseif (strcmpi(varargin{n},'PortNamePrefix'))
|
|
PortNamePrefix = varargin{n+1};
|
|
else
|
|
excite_args{end+1} = varargin{n};
|
|
excite_args{end+1} = varargin{n+1};
|
|
end
|
|
end
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
% determine index (1, 2 or 3) of propagation (length of MSL)
|
|
idx_prop_n = dir + 1;
|
|
idx_prop_nP = mod((dir+1),3)+1;
|
|
idx_prop_nPP = mod((dir+2),3)+1;
|
|
|
|
% direction of propagation
|
|
if stop(idx_prop_n)-start(idx_prop_n) > 0
|
|
direction = +1;
|
|
else
|
|
direction = -1;
|
|
end
|
|
|
|
% create the metal for the coaxial line
|
|
CSX = AddCylinder( CSX, pec_name, prio, start, stop, r_i );
|
|
CSX = AddCylindricalShell( CSX, pec_name, prio, start, stop, 0.5*(r_o+r_os), r_os-r_o );
|
|
|
|
% create the material filling for the coaxial line
|
|
if (~isempty(materialname))
|
|
CSX = AddCylindricalShell( CSX, materialname, prio-1, start, stop, 0.5*(r_o+r_i), r_o-r_i );
|
|
end
|
|
|
|
if isnan(measplanepos)
|
|
measplanepos = (start(idx_prop_n)+stop(idx_prop_n))/2;
|
|
else
|
|
measplanepos = start(idx_prop_n)+direction*measplanepos;
|
|
end
|
|
|
|
% calculate position of the voltage probes
|
|
try
|
|
mesh{1} = sort(unique(CSX.RectilinearGrid.XLines));
|
|
mesh{2} = sort(unique(CSX.RectilinearGrid.YLines));
|
|
mesh{3} = sort(unique(CSX.RectilinearGrid.ZLines));
|
|
meshlines = interp1( mesh{idx_prop_n}, 1:numel(mesh{idx_prop_n}), measplanepos, 'nearest' );
|
|
meshlines = mesh{idx_prop_n}(meshlines-1:meshlines+1); % get three lines (approx. at center)
|
|
if direction == -1
|
|
meshlines = fliplr(meshlines);
|
|
end
|
|
v1_start(idx_prop_n) = meshlines(1);
|
|
v1_start(idx_prop_nP) = start(idx_prop_nP)+r_i;
|
|
v1_start(idx_prop_nPP) = start(idx_prop_nPP);
|
|
v1_stop = v1_start;
|
|
v1_stop(idx_prop_nP) = start(idx_prop_nP)+r_o;
|
|
v2_start = v1_start;
|
|
v2_stop = v1_stop;
|
|
v2_start(idx_prop_n) = meshlines(2);
|
|
v2_stop(idx_prop_n) = meshlines(2);
|
|
v3_start = v2_start;
|
|
v3_stop = v2_stop;
|
|
v3_start(idx_prop_n) = meshlines(3);
|
|
v3_stop(idx_prop_n) = meshlines(3);
|
|
catch
|
|
error('Unable to place voltage probe on mesh; check the location of the port and the probe (MeasPlaneShift), and make sure that the mesh is large enough');
|
|
end
|
|
|
|
% calculate position of the current probes
|
|
i1_start(idx_prop_n) = 0.5*(meshlines(1)+meshlines(2));
|
|
i1_start(idx_prop_nP) = start(idx_prop_nP)-r_i-0.1*(r_o-r_i);
|
|
i1_start(idx_prop_nPP) = start(idx_prop_nPP)-r_i-0.1*(r_o-r_i);
|
|
i1_stop = i1_start;
|
|
i1_stop(idx_prop_nP) = start(idx_prop_nP)+r_i+0.1*(r_o-r_i);
|
|
i1_stop(idx_prop_nPP) = start(idx_prop_nPP)+r_i+0.1*(r_o-r_i);
|
|
|
|
i2_start = i1_start;
|
|
i2_stop = i1_stop;
|
|
i2_start(idx_prop_n) = 0.5*(meshlines(2)+meshlines(3));
|
|
i2_stop(idx_prop_n) = 0.5*(meshlines(2)+meshlines(3));
|
|
|
|
% create the probes
|
|
port.U_filename{1} = [PortNamePrefix 'port_ut' num2str(portnr) 'A'];
|
|
weight = 1;
|
|
CSX = AddProbe( CSX, port.U_filename{1}, 0, 'weight', weight );
|
|
CSX = AddBox( CSX, port.U_filename{1}, prio, v1_start, v1_stop );
|
|
port.U_filename{2} = [PortNamePrefix 'port_ut' num2str(portnr) 'B'];
|
|
CSX = AddProbe( CSX, port.U_filename{2}, 0, 'weight', weight );
|
|
CSX = AddBox( CSX, port.U_filename{2}, prio, v2_start, v2_stop );
|
|
port.U_filename{3} = [PortNamePrefix 'port_ut' num2str(portnr) 'C'];
|
|
CSX = AddProbe( CSX, port.U_filename{3}, 0, 'weight', weight );
|
|
CSX = AddBox( CSX, port.U_filename{3}, prio, v3_start, v3_stop );
|
|
|
|
weight = direction;
|
|
port.I_filename{1} = [PortNamePrefix 'port_it' num2str(portnr) 'A'];
|
|
CSX = AddProbe( CSX, port.I_filename{1}, 1, 'weight', weight );
|
|
CSX = AddBox( CSX, port.I_filename{1}, prio, i1_start, i1_stop );
|
|
port.I_filename{2} = [PortNamePrefix 'port_it' num2str(portnr) 'B'];
|
|
CSX = AddProbe( CSX, port.I_filename{2}, 1,'weight', weight );
|
|
CSX = AddBox( CSX, port.I_filename{2}, prio, i2_start, i2_stop );
|
|
|
|
% create port structure
|
|
port.LengthScale = 1;
|
|
port.nr = portnr;
|
|
port.type = 'Coaxial';
|
|
port.drawingunit = CSX.RectilinearGrid.ATTRIBUTE.DeltaUnit;
|
|
port.v_delta = diff(meshlines)*port.LengthScale;
|
|
port.i_delta = diff( meshlines(1:end-1) + diff(meshlines)/2 )*port.LengthScale;
|
|
port.direction = direction;
|
|
port.excite = 0;
|
|
port.measplanepos = abs(v2_start(idx_prop_n) - start(idx_prop_n))*port.LengthScale;
|
|
|
|
port.r_i = r_i;
|
|
port.r_o = r_o;
|
|
|
|
% create excitation (if enabled) and port resistance
|
|
try
|
|
meshline = interp1( mesh{idx_prop_n}, 1:numel(mesh{idx_prop_n}), start(idx_prop_n) + feed_shift*direction, 'nearest' );
|
|
min_cell_prop = min(diff(mesh{idx_prop_n}));
|
|
ex_start = start;
|
|
ex_start(idx_prop_n) = mesh{idx_prop_n}(meshline) - 0.01*min_cell_prop;
|
|
ex_stop = ex_start;
|
|
ex_stop(idx_prop_n) = mesh{idx_prop_n}(meshline) + 0.01*min_cell_prop;
|
|
catch
|
|
error('Unable to place excitation on mesh; check the location of the port and the excitation (FeedShift), and make sure that the mesh is large enough');
|
|
end
|
|
|
|
port.excite = 0;
|
|
if (excite_amp~=0)
|
|
dir_names={'x','y','z'};
|
|
nameX = ['(' dir_names{idx_prop_nP} '-' num2str(start(idx_prop_nP)) ')'];
|
|
nameY = ['(' dir_names{idx_prop_nPP} '-' num2str(start(idx_prop_nPP)) ')'];
|
|
|
|
func_Ex = [ nameX '/(' nameX '*' nameX '+' nameY '*' nameY ') * (sqrt(' nameX '*' nameX '+' nameY '*' nameY ')<' num2str(r_o) ') * (sqrt(' nameX '*' nameX '+' nameY '*' nameY ')>' num2str(r_i) ')'];
|
|
func_Ey = [ nameY '/(' nameX '*' nameX '+' nameY '*' nameY ') * (sqrt(' nameX '*' nameX '+' nameY '*' nameY ')<' num2str(r_o) ') * (sqrt(' nameX '*' nameX '+' nameY '*' nameY ')>' num2str(r_i) ')'];
|
|
|
|
func_E{idx_prop_n} = 0;
|
|
func_E{idx_prop_nP} = func_Ex;
|
|
func_E{idx_prop_nPP} = func_Ey;
|
|
|
|
port.excite = 1;
|
|
evec = [1 1 1];
|
|
evec(idx_prop_n) = 0;
|
|
|
|
CSX = AddExcitation( CSX, [PortNamePrefix 'port_excite_' num2str(portnr)], 0, evec, excite_args{:} );
|
|
CSX = SetExcitationWeight(CSX, [PortNamePrefix 'port_excite_' num2str(portnr)], func_E );
|
|
CSX = AddCylindricalShell(CSX,[PortNamePrefix 'port_excite_' num2str(portnr)],0 ,ex_start,ex_stop,0.5*(r_i+r_o),(r_o-r_i));
|
|
end
|
|
|
|
%% resistance at start of coaxial line
|
|
ex_start = start;
|
|
ex_stop = stop;
|
|
ex_stop(idx_prop_n) = ex_start(idx_prop_n);
|
|
|
|
if (feed_R > 0) && ~isinf(feed_R)
|
|
error 'feed_R not yet implemented'
|
|
elseif isinf(feed_R)
|
|
% do nothing --> open port
|
|
elseif feed_R == 0
|
|
%port "resistance" as metal
|
|
CSX = AddBox( CSX, pec_name, prio, ex_start, ex_stop );
|
|
CSX = AddCylindricalShell(CSX, pec_name, prio ,ex_start, ex_stop, 0.5*(r_i+r_o),(r_o-r_i));
|
|
else
|
|
error('openEMS:AddCoaxialPort','Coaxial port with resistance <= 0 it not possible');
|
|
end
|
|
end
|