106 lines
3.3 KiB
Matlab
106 lines
3.3 KiB
Matlab
%
|
|
% Tutorials / Circ_Waveguide
|
|
%
|
|
% Description at:
|
|
% http://openems.de/index.php/Tutorial:_Circular_Waveguide
|
|
%
|
|
% Tested with
|
|
% - Matlab 2011a / Octave 3.4.3
|
|
% - openEMS v0.0.31
|
|
%
|
|
% (C) 2010-2013 Thorsten Liebig <thorsten.liebig@gmx.de>
|
|
|
|
close all
|
|
clear
|
|
clc
|
|
|
|
%% setup the simulation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
physical_constants;
|
|
unit = 1e-3; %drawing unit in mm
|
|
|
|
% waveguide dimensions
|
|
length = 2000;
|
|
rad = 350; %waveguide radius in mm
|
|
|
|
% frequency range of interest
|
|
f_start = 300e6;
|
|
f_stop = 500e6;
|
|
|
|
mesh_res = [10 2*pi/49.999 10]; %targeted mesh resolution
|
|
|
|
%% setup FDTD parameter & excitation function %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
FDTD = InitFDTD('EndCriteria',1e-4,'CoordSystem',1);
|
|
FDTD = SetGaussExcite(FDTD,0.5*(f_start+f_stop),0.5*(f_stop-f_start));
|
|
|
|
% boundary conditions
|
|
BC = [0 0 0 0 3 3]; %pml in pos. and neg. z-direction
|
|
FDTD = SetBoundaryCond(FDTD,BC);
|
|
|
|
%% setup CSXCAD mesh %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
CSX = InitCSX('CoordSystem',1); % init a cylindrical mesh
|
|
mesh.r = SmoothMeshLines([0 rad], mesh_res(1)); %mesh in radial direction
|
|
mesh.a = SmoothMeshLines([0 2*pi], mesh_res(2)); % mesh in aziumthal dir.
|
|
mesh.z = SmoothMeshLines([0 length], mesh_res(3));
|
|
CSX = DefineRectGrid(CSX, unit,mesh);
|
|
|
|
%% apply the waveguide port %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
start=[mesh.r(1) mesh.a(1) mesh.z(8)];
|
|
stop =[mesh.r(end) mesh.a(end) mesh.z(15)];
|
|
[CSX, port{1}] = AddCircWaveGuidePort( CSX, 0, 1, start, stop, rad*unit, 'TE11', 0, 1);
|
|
|
|
start=[mesh.r(1) mesh.a(1) mesh.z(end-13)];
|
|
stop =[mesh.r(end) mesh.a(end) mesh.z(end-14)];
|
|
[CSX, port{2}] = AddCircWaveGuidePort( CSX, 0, 2, start, stop, rad*unit, 'TE11');
|
|
|
|
%% define dump box... %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
CSX = AddDump(CSX,'Et','FileType',1,'SubSampling','4,4,4');
|
|
start = [mesh.r(1) mesh.a(1) mesh.z(1)];
|
|
stop = [mesh.r(end) mesh.a(end) mesh.z(end)];
|
|
CSX = AddBox(CSX,'Et',0 , start,stop);
|
|
|
|
%% Write openEMS compatoble xml-file %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
Sim_Path = 'tmp';
|
|
Sim_CSX = 'circ_wg.xml';
|
|
|
|
[status, message, messageid] = rmdir(Sim_Path,'s');
|
|
[status, message, messageid] = mkdir(Sim_Path);
|
|
|
|
WriteOpenEMS([Sim_Path '/' Sim_CSX],FDTD,CSX);
|
|
|
|
RunOpenEMS(Sim_Path, Sim_CSX)
|
|
|
|
%% postproc %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
freq = linspace(f_start,f_stop,201);
|
|
port = calcPort( port, Sim_Path, freq);
|
|
|
|
s11 = port{1}.uf.ref./ port{1}.uf.inc;
|
|
s21 = port{2}.uf.ref./ port{1}.uf.inc;
|
|
ZL = port{1}.uf.tot./port{1}.if.tot;
|
|
|
|
|
|
%% plot s-parameter %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
figure
|
|
plot(freq*1e-6,20*log10(abs(s11)),'k-','Linewidth',2);
|
|
xlim([freq(1) freq(end)]*1e-6);
|
|
grid on;
|
|
hold on;
|
|
plot(freq*1e-6,20*log10(abs(s21)),'r--','Linewidth',2);
|
|
l = legend('S_{11}','S_{21}','Location','Best');
|
|
set(l,'FontSize',12);
|
|
ylabel('S-Parameter (dB)','FontSize',12);
|
|
xlabel('frequency (MHz) \rightarrow','FontSize',12);
|
|
|
|
%% compare analytic and numerical wave-impedance %%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
figure
|
|
plot(freq*1e-6,real(ZL),'Linewidth',2);
|
|
hold on;
|
|
grid on;
|
|
plot(freq*1e-6,imag(ZL),'r--','Linewidth',2);
|
|
plot(freq*1e-6,port{1}.ZL,'g-.','Linewidth',2);
|
|
ylabel('ZL (\Omega)','FontSize',12);
|
|
xlabel('frequency (MHz) \rightarrow','FontSize',12);
|
|
xlim([freq(1) freq(end)]*1e-6);
|
|
l = legend('\Re(Z_L)','\Im(Z_L)','Z_L analytic','Location','Best');
|
|
set(l,'FontSize',12);
|
|
|