zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/ad9083_evb/a10soc/system_project.tcl

87 lines
4.2 KiB
Tcl
Raw Permalink Normal View History

Add copyright and license to .tcl, .ttcl files Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-06 12:08:22 +00:00
###############################################################################
## Copyright (C) 2021-2023 Analog Devices, Inc. All rights reserved.
### SPDX short identifier: ADIBSD
###############################################################################
scripts: Merge adi_env.tcl into a single file Move the new adi_env.tcl file from hdl/projects/scripts into hdl/scrips
2022-07-12 11:06:15 +00:00
source ../../../scripts/adi_env.tcl
ad9083: Add reference design for ad9083_a10soc
2021-09-14 07:12:43 +00:00
source ../../scripts/adi_project_intel.tcl
adi_project ad9083_evb_a10soc
source $ad_hdl_dir/projects/common/a10soc/a10soc_system_assign.tcl
# files
Updated the makefiles to build the projects in subdirectories based on the build parameters. Running 'make' will build the default project directly in the project folder (like it did before) Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory. Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory. Running 'make clean' will clean the default project only. Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build. Running 'make clean-all' will delete all the built configurations and libraries. Note that the 'JESD' and 'LANE' words from the parameter names are stripped. Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-09-23 09:28:22 +00:00
set_global_assignment -name VERILOG_FILE $ad_hdl_dir/library/common/ad_3w_spi.v
ad9083: Add reference design for ad9083_a10soc
2021-09-14 07:12:43 +00:00
# lane interface
# Note: This projects requires a hardware rework to function correctly.
# The rework connects FMC header pins directly to the FPGA so that they can be
# accessed by the fabric.
#
# Changes required:
# R610: DNI -> R0
# R611: DNI -> R0
# R612: R0 -> DNI
# R613: R0 -> DNI
# R620: DNI -> R0
# R632: DNI -> R0
# R621: R0 -> DNI
# R633: R0 -> DNI
set_location_assignment PIN_G14 -to rx_device_clk ; ## G06 FMCA_HPC_LA00_CC_P
set_location_assignment PIN_H14 -to "rx_device_clk(n)" ; ## G07 FMCA_HPC_LA00_CC_N
set_location_assignment PIN_N29 -to rx_ref_clk ; ## D04 FMCA_HPC_GBTCLK0_M2C_P
set_location_assignment PIN_N28 -to "rx_ref_clk(n)" ; ## D05 FMCA_HPC_GBTCLK0_M2C_N
set_location_assignment PIN_T31 -to rx_serial_data[0] ; ## C06 FMCA_HPC_DP0_M2C_P
set_location_assignment PIN_T30 -to "rx_serial_data[0](n)" ; ## C07 FMCA_HPC_DP0_M2C_N
set_location_assignment PIN_R33 -to rx_serial_data[1] ; ## A02 FMCA_HPC_DP1_M2C_P
set_location_assignment PIN_R32 -to "rx_serial_data[1](n)" ; ## A03 FMCA_HPC_DP1_M2C_N
set_location_assignment PIN_P35 -to rx_serial_data[2] ; ## A06 FMCA_HPC_DP2_M2C_P
set_location_assignment PIN_P34 -to "rx_serial_data[2](n)" ; ## A07 FMCA_HPC_DP2_M2C_N
set_location_assignment PIN_P31 -to rx_serial_data[3] ; ## A10 FMCA_HPC_DP3_M2C_P
set_location_assignment PIN_P30 -to "rx_serial_data[3](n)" ; ## A11 FMCA_HPC_DP3_M2C_N
set_location_assignment PIN_H12 -to rx_sync ; ## H10 FMCA_HPC_LA04_P
set_location_assignment PIN_H13 -to "rx_sync(n)" ; ## H11 FMCA_HPC_LA04_N
set_location_assignment PIN_B11 -to rx_sysref ; ## G12 FMCA_HPC_LA08_P
set_location_assignment PIN_B12 -to "rx_sysref(n)" ; ## G13 FMCA_HPC_LA08_N
set_instance_assignment -name IO_STANDARD LVDS -to rx_device_clk
set_instance_assignment -name IO_STANDARD LVDS -to "rx_device_clk(n)"
set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to rx_device_clk
set_instance_assignment -name IO_STANDARD LVDS -to rx_ref_clk
set_instance_assignment -name IO_STANDARD LVDS -to "rx_ref_clk(n)"
set_instance_assignment -name IO_STANDARD "HIGH SPEED DIFFERENTIAL I/O" -to rx_serial_data
set_instance_assignment -name XCVR_VCCR_VCCT_VOLTAGE 1_0V -to rx_serial_data
set_instance_assignment -name IO_STANDARD LVDS -to rx_sync
set_instance_assignment -name IO_STANDARD LVDS -to "rx_sync(n)"
set_instance_assignment -name IO_STANDARD LVDS -to rx_sysref
set_instance_assignment -name IO_STANDARD LVDS -to "rx_sysref(n)"
set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to rx_sysref
set_location_assignment PIN_D13 -to pwdn ; ## H08 FMCA_HPC_LA02_N
set_location_assignment PIN_A9 -to rstb ; ## H13 FMCA_HPC_LA07_P
set_location_assignment PIN_C14 -to refsel ; ## G09 FMCA_HPC_LA03_P
set_instance_assignment -name IO_STANDARD "1.8 V" -to pwdn
set_instance_assignment -name IO_STANDARD "1.8 V" -to rstb
set_instance_assignment -name IO_STANDARD "1.8 V" -to refsel
# spi
set_location_assignment PIN_B9 -to spi_csn_clk ; ## H14 FMCA_LA07_N
set_location_assignment PIN_C13 -to spi_csn_adc ; ## H07 FMCA_LA02_P
set_location_assignment PIN_E12 -to spi_clk ; ## D08 FMCA_LA01_P_CC
set_location_assignment PIN_E13 -to spi_sdio ; ## D09 FMCA_LA01_N_CC
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_csn_clk
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_csn_adc
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_clk
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_sdio
execute_flow -compile