zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/common/vcu118/vcu118_system_constr.xdc

77 lines
4.1 KiB
Plaintext
Raw Permalink Normal View History

Add copyright and license to .xdc files Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-10 08:38:46 +00:00
###############################################################################
## Copyright (C) 2019-2023 Analog Devices, Inc. All rights reserved.
### SPDX short identifier: ADIBSD
###############################################################################
vcu118: Initial commit for common files
2019-02-28 13:14:36 +00:00
# constraints
set_property -dict {PACKAGE_PIN L19 IOSTANDARD LVCMOS12} [get_ports sys_rst]
# clocks
common:vcu118: move system memory to DDR C2 The DDR controller for C2 for is much closer to the transceivers which connect to the FMCp connector so designs does not have to span over all three SLRs just over two reducing implementation and timing closure effort.
2019-11-22 15:46:23 +00:00
set_property -dict {PACKAGE_PIN AW26 IOSTANDARD LVDS} [get_ports sys_clk_p]
set_property -dict {PACKAGE_PIN AW27 IOSTANDARD LVDS} [get_ports sys_clk_n]
vcu118: Initial commit for common files
2019-02-28 13:14:36 +00:00
# ethernet
set_property PACKAGE_PIN AU21 [get_ports phy_tx_p]
set_property PACKAGE_PIN AV21 [get_ports phy_tx_n]
set_property PACKAGE_PIN AU24 [get_ports phy_rx_p]
set_property PACKAGE_PIN AV24 [get_ports phy_rx_n]
vcu118/vcu118_system_constr: Enable internal diff term for Ethernet clock There are no external termination resistors on the VCU118 for the SGMII clock lines. The board files enables them, but this was not reflected in the constraint files.
2022-02-14 10:54:25 +00:00
set_property -dict {PACKAGE_PIN AT22 IOSTANDARD LVDS DIFF_TERM_ADV TERM_100} [get_ports phy_clk_p]
set_property -dict {PACKAGE_PIN AU22 IOSTANDARD LVDS DIFF_TERM_ADV TERM_100} [get_ports phy_clk_n]
vcu118: Initial commit for common files
2019-02-28 13:14:36 +00:00
set_property -dict {PACKAGE_PIN BA21 IOSTANDARD LVCMOS18} [get_ports phy_rst_n]
set_property -dict {PACKAGE_PIN AV23 IOSTANDARD LVCMOS18} [get_ports mdio_mdc]
set_property -dict {PACKAGE_PIN AR23 IOSTANDARD LVCMOS18} [get_ports mdio_mdio]
set_false_path -through [get_nets phy_rst_n]
# uart
set_property -dict {PACKAGE_PIN AW25 IOSTANDARD LVCMOS18} [get_ports uart_sin]
set_property -dict {PACKAGE_PIN BB21 IOSTANDARD LVCMOS18} [get_ports uart_sout]
set_property -dict {PACKAGE_PIN B17 IOSTANDARD LVCMOS12} [get_ports gpio_bd[0]] ; ## GPIO_DIP_SW0
set_property -dict {PACKAGE_PIN G16 IOSTANDARD LVCMOS12} [get_ports gpio_bd[1]] ; ## GPIO_DIP_SW1
set_property -dict {PACKAGE_PIN J16 IOSTANDARD LVCMOS12} [get_ports gpio_bd[2]] ; ## GPIO_DIP_SW2
set_property -dict {PACKAGE_PIN D21 IOSTANDARD LVCMOS12} [get_ports gpio_bd[3]] ; ## GPIO_DIP_SW3
set_property -dict {PACKAGE_PIN BD23 IOSTANDARD LVCMOS18} [get_ports gpio_bd[4]] ; ## GPIO_PB_0
set_property -dict {PACKAGE_PIN BF22 IOSTANDARD LVCMOS18} [get_ports gpio_bd[5]] ; ## GPIO_PB_1
set_property -dict {PACKAGE_PIN BE22 IOSTANDARD LVCMOS18} [get_ports gpio_bd[6]] ; ## GPIO_PB_2
set_property -dict {PACKAGE_PIN BE23 IOSTANDARD LVCMOS18} [get_ports gpio_bd[7]] ; ## GPIO_PB_3
set_property -dict {PACKAGE_PIN BB24 IOSTANDARD LVCMOS18} [get_ports gpio_bd[8]] ; ## GPIO_PB_4
set_property -dict {PACKAGE_PIN AT32 IOSTANDARD LVCMOS12} [get_ports gpio_bd[9]] ; ## GPIO_LED_0_LS
set_property -dict {PACKAGE_PIN AV34 IOSTANDARD LVCMOS12} [get_ports gpio_bd[10]] ; ## GPIO_LED_1_LS
set_property -dict {PACKAGE_PIN AY30 IOSTANDARD LVCMOS12} [get_ports gpio_bd[11]] ; ## GPIO_LED_2_LS
set_property -dict {PACKAGE_PIN BB32 IOSTANDARD LVCMOS12} [get_ports gpio_bd[12]] ; ## GPIO_LED_3_LS
set_property -dict {PACKAGE_PIN BF32 IOSTANDARD LVCMOS12} [get_ports gpio_bd[13]] ; ## GPIO_LED_4_LS
set_property -dict {PACKAGE_PIN AU37 IOSTANDARD LVCMOS12} [get_ports gpio_bd[14]] ; ## GPIO_LED_5_LS
set_property -dict {PACKAGE_PIN AV36 IOSTANDARD LVCMOS12} [get_ports gpio_bd[15]] ; ## GPIO_LED_6_LS
set_property -dict {PACKAGE_PIN BA37 IOSTANDARD LVCMOS12} [get_ports gpio_bd[16]] ; ## GPIO_LED_7_LS
# iic
set_property -dict {PACKAGE_PIN AL25 IOSTANDARD LVCMOS18} [get_ports iic_rstn]
set_property -dict {PACKAGE_PIN AM24 IOSTANDARD LVCMOS18 DRIVE 8 SLEW SLOW} [get_ports iic_scl]
set_property -dict {PACKAGE_PIN AL24 IOSTANDARD LVCMOS18 DRIVE 8 SLEW SLOW} [get_ports iic_sda]
microblaze: add SPI clock constraint The SPI clock is a generated clock from the system clock. Worst case scenario is that the system clock is divided by two.
2019-05-30 08:16:35 +00:00
# Create SPI clock
create_generated_clock -name spi_clk \
-source [get_pins i_system_wrapper/system_i/axi_spi/ext_spi_clk] \
-divide_by 2 [get_pins i_system_wrapper/system_i/axi_spi/sck_o]
common/vcu118: Balance clocks Minimize skew on synchronous CDC timing paths between clocks originating from the same MMCM source. (sys_mem_clk and sys_cpu_clk) This is required mostly by the smart interconnect. The CLOCK_DELAY_GROUP property must be applied directly to the output net of BUFGs.
2019-09-09 11:41:42 +00:00
# Balance clocks
#
# Minimize skew on synchronous CDC timing paths between clocks originating
# from the same MMCM source. (sys_mem_clk and sys_cpu_clk)
# This is required mostly by the smart interconnect.
# Property must be applied directly to the output net of BUFGs.
set_property CLOCK_DELAY_GROUP BALANCE_CLOCKS \
[list [get_nets [get_property PARENT [get_nets {i_system_wrapper/system_i/sys_cpu_clk}]]] \
[get_nets [get_property PARENT [get_nets {i_system_wrapper/system_i/sys_mem_clk}]]] \
]