pluto_hdl_adi/library/util_pmod_fmeter/util_pmod_fmeter.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************

module util_pmod_fmeter (

  ref_clk,
  square_signal,

  // axi interface

  s_axi_aclk,
  s_axi_aresetn,
  s_axi_awvalid,
  s_axi_awaddr,
  s_axi_awready,
  s_axi_wvalid,
  s_axi_wdata,
  s_axi_wstrb,
  s_axi_wready,
  s_axi_bvalid,
  s_axi_bresp,
  s_axi_bready,
  s_axi_arvalid,
  s_axi_araddr,
  s_axi_arready,
  s_axi_rvalid,
  s_axi_rresp,
  s_axi_rdata,
  s_axi_rready);

  // parameters

  parameter       PCORE_ID = 0;

  // physical interface

  input           ref_clk;
  input           square_signal;

  // axi interface

  input           s_axi_aclk;
  input           s_axi_aresetn;
  input           s_axi_awvalid;
  input   [31:0]  s_axi_awaddr;
  output          s_axi_awready;
  input           s_axi_wvalid;
  input   [31:0]  s_axi_wdata;
  input   [ 3:0]  s_axi_wstrb;
  output          s_axi_wready;
  output          s_axi_bvalid;
  output  [ 1:0]  s_axi_bresp;
  input           s_axi_bready;
  input           s_axi_arvalid;
  input   [31:0]  s_axi_araddr;
  output          s_axi_arready;
  output          s_axi_rvalid;
  output  [ 1:0]  s_axi_rresp;
  output  [31:0]  s_axi_rdata;
  input           s_axi_rready;

  // internal signals

  wire            up_clk;
  wire            up_rstn;
  wire            reset;
  wire            up_rreq_s;
  wire    [13:0]  up_raddr_s;
  wire    [31:0]  up_rdata_s;
  wire            up_rack_s;
  wire            up_wack_s;
  wire            up_wreq_s;
  wire    [13:0]  up_waddr_s;
  wire    [31:0]  up_wdata_s;

  wire    [31:0]  signal_freq_s;

  //defaults

  assign up_clk     = s_axi_aclk;
  assign up_rstn    = s_axi_aresetn;
  assign adc_valid  = 1'b1;

  // frequency measurment module

  util_pmod_fmeter_core i_util_pmod_fmeter_core (
    .ref_clk(ref_clk),
    .reset(reset),
    .square_signal(square_signal),
    .signal_freq(signal_freq_s));

  // register map

  up_pmod i_up_pmod(
    .pmod_clk(ref_clk),
    .pmod_rst(reset),
    .pmod_signal_freq(signal_freq_s),
    .up_rstn(up_rstn),
    .up_clk(up_clk),
    .up_wreq(up_wreq_s),
    .up_waddr(up_waddr_s),
    .up_wdata(up_wdata_s),
    .up_wack(up_wack_s),
    .up_rreq(up_rreq_s),
    .up_raddr(up_raddr_s),
    .up_rdata(up_rdata_s),
    .up_rack(up_rack_s));

  // up bus interface

  up_axi i_up_axi (
    .up_rstn (up_rstn),
    .up_clk (up_clk),
    .up_axi_awvalid (s_axi_awvalid),
    .up_axi_awaddr (s_axi_awaddr),
    .up_axi_awready (s_axi_awready),
    .up_axi_wvalid (s_axi_wvalid),
    .up_axi_wdata (s_axi_wdata),
    .up_axi_wstrb (s_axi_wstrb),
    .up_axi_wready (s_axi_wready),
    .up_axi_bvalid (s_axi_bvalid),
    .up_axi_bresp (s_axi_bresp),
    .up_axi_bready (s_axi_bready),
    .up_axi_arvalid (s_axi_arvalid),
    .up_axi_araddr (s_axi_araddr),
    .up_axi_arready (s_axi_arready),
    .up_axi_rvalid (s_axi_rvalid),
    .up_axi_rresp (s_axi_rresp),
    .up_axi_rdata (s_axi_rdata),
    .up_axi_rready (s_axi_rready),
    .up_wreq (up_wreq_s),
    .up_waddr (up_waddr_s),
    .up_wdata (up_wdata_s),
    .up_wack (up_wack_s),
    .up_rreq (up_rreq_s),
    .up_raddr (up_raddr_s),
    .up_rdata (up_rdata_s),
    .up_rack (up_rack_s));

endmodule