pluto_hdl_adi/library/axi_tdd/axi_tdd.v

330 lines
10 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2021 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/1ps
module axi_tdd #(
// Boolean. Whether a false path constraint should be introduced for the tdd_sync
// trigger input. This allows asynchronous (or external) sources to be used.
// Note: This parameter isn't used inside of the core, but just for the
// configuration of the constraints file.
parameter ASYNC_TDD_SYNC = 1
) (
// clock
input clk,
input rst,
// control signals from the tdd control
output tdd_rx_vco_en,
output tdd_tx_vco_en,
output tdd_rx_rf_en,
output tdd_tx_rf_en,
// status signal
output tdd_enabled,
// sync signal
input tdd_sync,
output reg tdd_sync_cntr,
// tx/rx data flow control
output reg tdd_tx_valid,
output reg tdd_rx_valid,
// bus interface
input s_axi_aresetn,
input s_axi_aclk,
input s_axi_awvalid,
input [15:0] s_axi_awaddr,
output s_axi_awready,
input s_axi_wvalid,
input [31:0] s_axi_wdata,
input [ 3:0] s_axi_wstrb,
output s_axi_wready,
output s_axi_bvalid,
output [ 1:0] s_axi_bresp,
input s_axi_bready,
input s_axi_arvalid,
input [15:0] s_axi_araddr,
output s_axi_arready,
output s_axi_rvalid,
output [ 1:0] s_axi_rresp,
output [31:0] s_axi_rdata,
input s_axi_rready
);
// internal signals
wire up_rstn;
wire up_clk;
wire up_wreq;
wire [13:0] up_waddr;
wire [31:0] up_wdata;
wire up_wack;
wire up_rreq;
wire [13:0] up_raddr;
wire [31:0] up_rdata;
wire up_rack;
assign up_clk = s_axi_aclk;
assign up_rstn = s_axi_aresetn;
wire tdd_enable_s;
wire tdd_secondary_s;
wire [ 7:0] tdd_burst_count_s;
wire tdd_rx_only_s;
wire tdd_tx_only_s;
wire tdd_gated_rx_dmapath_s;
wire tdd_gated_tx_dmapath_s;
wire [23:0] tdd_counter_init_s;
wire [23:0] tdd_frame_length_s;
wire tdd_terminal_type_s;
wire tdd_sync_enable_s;
wire [23:0] tdd_vco_rx_on_1_s;
wire [23:0] tdd_vco_rx_off_1_s;
wire [23:0] tdd_vco_tx_on_1_s;
wire [23:0] tdd_vco_tx_off_1_s;
wire [23:0] tdd_rx_on_1_s;
wire [23:0] tdd_rx_off_1_s;
wire [23:0] tdd_rx_dp_on_1_s;
wire [23:0] tdd_rx_dp_off_1_s;
wire [23:0] tdd_tx_on_1_s;
wire [23:0] tdd_tx_off_1_s;
wire [23:0] tdd_tx_dp_on_1_s;
wire [23:0] tdd_tx_dp_off_1_s;
wire [23:0] tdd_vco_rx_on_2_s;
wire [23:0] tdd_vco_rx_off_2_s;
wire [23:0] tdd_vco_tx_on_2_s;
wire [23:0] tdd_vco_tx_off_2_s;
wire [23:0] tdd_rx_on_2_s;
wire [23:0] tdd_rx_off_2_s;
wire [23:0] tdd_rx_dp_on_2_s;
wire [23:0] tdd_rx_dp_off_2_s;
wire [23:0] tdd_tx_on_2_s;
wire [23:0] tdd_tx_off_2_s;
wire [23:0] tdd_tx_dp_on_2_s;
wire [23:0] tdd_tx_dp_off_2_s;
wire [ 7:0] tdd_status;
wire [23:0] tdd_counter_status;
wire tdd_rx_dp_en_s;
wire tdd_tx_dp_en_s;
reg tdd_vco_overlap;
reg tdd_rf_overlap;
assign tdd_enabled = tdd_enable_s;
// syncronization control signal
always @(posedge clk) begin
if (tdd_enable_s == 1'b1) begin
tdd_sync_cntr <= ~tdd_terminal_type_s;
end else begin
tdd_sync_cntr <= 1'b0;
end
end
// tx/rx data flow control
always @(posedge clk) begin
if ((tdd_enable_s == 1) && (tdd_gated_tx_dmapath_s == 1)) begin
tdd_tx_valid <= tdd_tx_dp_en_s;
end else begin
tdd_tx_valid <= 1'b1;
end
end
always @(posedge clk) begin
if ((tdd_enable_s == 1) && (tdd_gated_rx_dmapath_s == 1)) begin
tdd_rx_valid <= tdd_rx_dp_en_s;
end else begin
tdd_rx_valid <= 1'b1;
end
end
always @(posedge clk) begin
if (rst == 1'b1) begin
tdd_vco_overlap <= 1'b0;
tdd_rf_overlap <= 1'b0;
end else begin
tdd_vco_overlap <= tdd_rx_vco_en & tdd_tx_vco_en;
tdd_rf_overlap <= tdd_rx_rf_en & tdd_tx_rf_en;
end
end
assign tdd_status = {6'b0, tdd_rf_overlap, tdd_vco_overlap};
// instantiations
up_tdd_cntrl #(
.BASE_ADDRESS('h0)
) i_up_tdd_cntrl(
.clk(clk),
.rst(rst),
.tdd_enable(tdd_enable_s),
.tdd_secondary(tdd_secondary_s),
.tdd_burst_count(tdd_burst_count_s),
.tdd_tx_only(tdd_tx_only_s),
.tdd_rx_only(tdd_rx_only_s),
.tdd_gated_rx_dmapath(tdd_gated_rx_dmapath_s),
.tdd_gated_tx_dmapath(tdd_gated_tx_dmapath_s),
.tdd_counter_init(tdd_counter_init_s),
.tdd_frame_length(tdd_frame_length_s),
.tdd_terminal_type(tdd_terminal_type_s),
.tdd_vco_rx_on_1(tdd_vco_rx_on_1_s),
.tdd_vco_rx_off_1(tdd_vco_rx_off_1_s),
.tdd_vco_tx_on_1(tdd_vco_tx_on_1_s),
.tdd_vco_tx_off_1(tdd_vco_tx_off_1_s),
.tdd_rx_on_1(tdd_rx_on_1_s),
.tdd_rx_off_1(tdd_rx_off_1_s),
.tdd_rx_dp_on_1(tdd_rx_dp_on_1_s),
.tdd_rx_dp_off_1(tdd_rx_dp_off_1_s),
.tdd_tx_on_1(tdd_tx_on_1_s),
.tdd_tx_off_1(tdd_tx_off_1_s),
.tdd_tx_dp_on_1(tdd_tx_dp_on_1_s),
.tdd_tx_dp_off_1(tdd_tx_dp_off_1_s),
.tdd_vco_rx_on_2(tdd_vco_rx_on_2_s),
.tdd_vco_rx_off_2(tdd_vco_rx_off_2_s),
.tdd_vco_tx_on_2(tdd_vco_tx_on_2_s),
.tdd_vco_tx_off_2(tdd_vco_tx_off_2_s),
.tdd_rx_on_2(tdd_rx_on_2_s),
.tdd_rx_off_2(tdd_rx_off_2_s),
.tdd_rx_dp_on_2(tdd_rx_dp_on_2_s),
.tdd_rx_dp_off_2(tdd_rx_dp_off_2_s),
.tdd_tx_on_2(tdd_tx_on_2_s),
.tdd_tx_off_2(tdd_tx_off_2_s),
.tdd_tx_dp_on_2(tdd_tx_dp_on_2_s),
.tdd_tx_dp_off_2(tdd_tx_dp_off_2_s),
.tdd_status(tdd_status),
.up_rstn(up_rstn),
.up_clk(up_clk),
.up_wreq(up_wreq),
.up_waddr(up_waddr),
.up_wdata(up_wdata),
.up_wack(up_wack),
.up_rreq(up_rreq),
.up_raddr(up_raddr),
.up_rdata(up_rdata),
.up_rack(up_rack));
ad_tdd_control #(
.TX_DATA_PATH_DELAY(0),
.CONTROL_PATH_DELAY(0)
) i_tdd_control (
.clk(clk),
.rst(rst),
.tdd_enable(tdd_enable_s),
.tdd_secondary(tdd_secondary_s),
.tdd_counter_init(tdd_counter_init_s),
.tdd_frame_length(tdd_frame_length_s),
.tdd_burst_count(tdd_burst_count_s),
.tdd_rx_only(tdd_rx_only_s),
.tdd_tx_only(tdd_tx_only_s),
.tdd_sync (tdd_sync),
.tdd_vco_rx_on_1(tdd_vco_rx_on_1_s),
.tdd_vco_rx_off_1(tdd_vco_rx_off_1_s),
.tdd_vco_tx_on_1(tdd_vco_tx_on_1_s),
.tdd_vco_tx_off_1(tdd_vco_tx_off_1_s),
.tdd_rx_on_1(tdd_rx_on_1_s),
.tdd_rx_off_1(tdd_rx_off_1_s),
.tdd_rx_dp_on_1(tdd_rx_dp_on_1_s),
.tdd_rx_dp_off_1(tdd_rx_dp_off_1_s),
.tdd_tx_on_1(tdd_tx_on_1_s),
.tdd_tx_off_1(tdd_tx_off_1_s),
.tdd_tx_dp_on_1(tdd_tx_dp_on_1_s),
.tdd_tx_dp_off_1(tdd_tx_dp_off_1_s),
.tdd_vco_rx_on_2(tdd_vco_rx_on_2_s),
.tdd_vco_rx_off_2(tdd_vco_rx_off_2_s),
.tdd_vco_tx_on_2(tdd_vco_tx_on_2_s),
.tdd_vco_tx_off_2(tdd_vco_tx_off_2_s),
.tdd_rx_on_2(tdd_rx_on_2_s),
.tdd_rx_off_2(tdd_rx_off_2_s),
.tdd_rx_dp_on_2(tdd_rx_dp_on_2_s),
.tdd_rx_dp_off_2(tdd_rx_dp_off_2_s),
.tdd_tx_on_2(tdd_tx_on_2_s),
.tdd_tx_off_2(tdd_tx_off_2_s),
.tdd_tx_dp_on_2(tdd_tx_dp_on_2_s),
.tdd_tx_dp_off_2(tdd_tx_dp_off_2_s),
.tdd_rx_dp_en(tdd_rx_dp_en_s),
.tdd_tx_dp_en(tdd_tx_dp_en_s),
.tdd_rx_vco_en(tdd_rx_vco_en),
.tdd_tx_vco_en(tdd_tx_vco_en),
.tdd_rx_rf_en(tdd_rx_rf_en),
.tdd_tx_rf_en(tdd_tx_rf_en),
.tdd_counter_status(tdd_counter_status));
up_axi #(
.AXI_ADDRESS_WIDTH(16)
) i_up_axi (
.up_rstn(s_axi_aresetn),
.up_clk(s_axi_aclk),
.up_axi_awvalid(s_axi_awvalid),
.up_axi_awaddr(s_axi_awaddr),
.up_axi_awready(s_axi_awready),
.up_axi_wvalid(s_axi_wvalid),
.up_axi_wdata(s_axi_wdata),
.up_axi_wstrb(s_axi_wstrb),
.up_axi_wready(s_axi_wready),
.up_axi_bvalid(s_axi_bvalid),
.up_axi_bresp(s_axi_bresp),
.up_axi_bready(s_axi_bready),
.up_axi_arvalid(s_axi_arvalid),
.up_axi_araddr(s_axi_araddr),
.up_axi_arready(s_axi_arready),
.up_axi_rvalid(s_axi_rvalid),
.up_axi_rresp(s_axi_rresp),
.up_axi_rdata(s_axi_rdata),
.up_axi_rready(s_axi_rready),
.up_wreq(up_wreq),
.up_waddr(up_waddr),
.up_wdata(up_wdata),
.up_wack(up_wack),
.up_rreq(up_rreq),
.up_raddr(up_raddr),
.up_rdata(up_rdata),
.up_rack(up_rack));
endmodule