pluto_hdl_adi/library/common/ad_jesd_align.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms. 
// The user should keep this in in mind while exploring these cores. 
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
//  (at the option of the user):
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
//   2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module ad_jesd_align (

  // jesd interface

  input                   rx_clk,
  input       [ 3:0]      rx_ip_sof,
  input       [31:0]      rx_ip_data,
  output  reg             rx_sof,
  output  reg [31:0]      rx_data);

  // internal registers

  reg     [31:0]  rx_ip_data_d = 'd0;
  reg     [ 3:0]  rx_ip_sof_hold = 'd0;
  reg             rx_ip_sof_d = 'd0;

  // dword may contain more than one frame per clock

  always @(posedge rx_clk) begin
    rx_ip_data_d <= rx_ip_data;
    rx_ip_sof_d <= rx_ip_sof;
    if (rx_ip_sof != 4'h0) begin
      rx_ip_sof_hold <= rx_ip_sof;
    end
    rx_sof <= |rx_ip_sof_d;
    if (rx_ip_sof_hold[0] == 1'b1) begin
      rx_data <= rx_ip_data;
    end else if (rx_ip_sof_hold[1] == 1'b1) begin
      rx_data <= {rx_ip_data[ 7:0], rx_ip_data_d[31: 8]};
    end else if (rx_ip_sof_hold[2] == 1'b1) begin
      rx_data <= {rx_ip_data[15:0], rx_ip_data_d[31:16]};
    end else if (rx_ip_sof_hold[3] == 1'b1) begin
      rx_data <= {rx_ip_data[23:0], rx_ip_data_d[31:24]};
    end else begin
      rx_data <= 32'd0;
    end
  end

endmodule

// ***************************************************************************
// ***************************************************************************