pluto_hdl_adi/library/common/up_gt.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms. 
// The user should keep this in in mind while exploring these cores. 
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
//  (at the option of the user):
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
//   2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module up_gt #(

  parameter   integer GTH_OR_GTX_N = 0) (

  // drp interface

  output  reg             up_drp_qpll0_sel,
  output  reg             up_drp_qpll0_wr,
  output  reg [11:0]      up_drp_qpll0_addr,
  output  reg [15:0]      up_drp_qpll0_wdata,
  input       [15:0]      up_drp_qpll0_rdata,
  input                   up_drp_qpll0_ready,
  output  reg             up_drp_qpll1_sel,
  output  reg             up_drp_qpll1_wr,
  output  reg [11:0]      up_drp_qpll1_addr,
  output  reg [15:0]      up_drp_qpll1_wdata,
  input       [15:0]      up_drp_qpll1_rdata,
  input                   up_drp_qpll1_ready,

  // bus interface

  input                   up_rstn,
  input                   up_clk,
  input                   up_wreq,
  input       [13:0]      up_waddr,
  input       [31:0]      up_wdata,
  output  reg             up_wack,
  input                   up_rreq,
  input       [13:0]      up_raddr,
  output  reg [31:0]      up_rdata,
  output  reg             up_rack);


  // internal registers

  reg             up_drp_qpll0_status = 'd0;
  reg             up_drp_qpll0_rwn = 'd0;
  reg     [15:0]  up_drp_qpll0_rdata_hold = 'd0;
  reg             up_drp_qpll1_status = 'd0;
  reg             up_drp_qpll1_rwn = 'd0;
  reg     [15:0]  up_drp_qpll1_rdata_hold = 'd0;

  // internal signals

  wire            up_wreq_s;
  wire            up_rreq_s;

  // decode block select

  assign up_wreq_s = (up_waddr[13:8] == 6'h10) ? up_wreq : 1'b0;
  assign up_rreq_s = (up_raddr[13:8] == 6'h10) ? up_rreq : 1'b0;

  // processor write interface

  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_wack <= 'd0;
      up_drp_qpll0_sel <= 'd0;
      up_drp_qpll0_wr <= 'd0;
      up_drp_qpll0_status <= 'd0;
      up_drp_qpll0_rwn <= 'd0;
      up_drp_qpll0_addr <= 'd0;
      up_drp_qpll0_wdata <= 'd0;
      up_drp_qpll0_rdata_hold <= 'd0;
      up_drp_qpll1_sel <= 'd0;
      up_drp_qpll1_wr <= 'd0;
      up_drp_qpll1_status <= 'd0;
      up_drp_qpll1_rwn <= 'd0;
      up_drp_qpll1_addr <= 'd0;
      up_drp_qpll1_wdata <= 'd0;
      up_drp_qpll1_rdata_hold <= 'd0;
    end else begin
      up_wack <= up_wreq_s;
      if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h14)) begin
        up_drp_qpll0_sel <= 1'b1;
        up_drp_qpll0_wr <= ~up_wdata[28];
      end else begin
        up_drp_qpll0_sel <= 1'b0;
        up_drp_qpll0_wr <= 1'b0;
      end
      if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h14)) begin
        up_drp_qpll0_status <= 1'b1;
      end else if (up_drp_qpll0_ready == 1'b1) begin
        up_drp_qpll0_status <= 1'b0;
      end
      if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h14)) begin
        up_drp_qpll0_rwn <= up_wdata[28];
        up_drp_qpll0_addr <= up_wdata[27:16];
        up_drp_qpll0_wdata <= up_wdata[15:0];
      end
      if (up_drp_qpll0_ready == 1'b1) begin
        up_drp_qpll0_rdata_hold <= up_drp_qpll0_rdata;
      end
      if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h24)) begin
        up_drp_qpll1_sel <= 1'b1;
        up_drp_qpll1_wr <= ~up_wdata[28];
      end else begin
        up_drp_qpll1_sel <= 1'b0;
        up_drp_qpll1_wr <= 1'b0;
      end
      if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h24)) begin
        up_drp_qpll1_status <= 1'b1;
      end else if (up_drp_qpll1_ready == 1'b1) begin
        up_drp_qpll1_status <= 1'b0;
      end
      if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h24)) begin
        up_drp_qpll1_rwn <= up_wdata[28];
        up_drp_qpll1_addr <= up_wdata[27:16];
        up_drp_qpll1_wdata <= up_wdata[15:0];
      end
      if (up_drp_qpll1_ready == 1'b1) begin
        up_drp_qpll1_rdata_hold <= up_drp_qpll1_rdata;
      end
    end
  end

  // processor read interface

  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_rack <= 'd0;
      up_rdata <= 'd0;
    end else begin
      up_rack <= up_rreq_s;
      if (up_rreq_s == 1'b1) begin
        case (up_raddr[7:0])
          8'h14: up_rdata <= {3'd0, up_drp_qpll0_rwn,
                              up_drp_qpll0_addr, up_drp_qpll0_wdata};
          8'h15: up_rdata <= {15'd0, up_drp_qpll0_status, up_drp_qpll0_rdata};
          8'h24: up_rdata <= {3'd0, up_drp_qpll1_rwn,
                              up_drp_qpll1_addr, up_drp_qpll1_wdata};
          8'h25: up_rdata <= {15'd0, up_drp_qpll1_status, up_drp_qpll1_rdata};
          8'h3a: up_rdata <= GTH_OR_GTX_N;
          default: up_rdata <= 0;
        endcase
      end else begin
        up_rdata <= 32'd0;
      end
    end
  end

endmodule

// ***************************************************************************
// ***************************************************************************