pluto_hdl_adi/library/axi_ad3552r/axi_ad3552r.v

234 lines
7.1 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright (C) 2022-2023 Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_ad3552r #(
parameter ID = 0,
parameter FPGA_TECHNOLOGY = 0,
parameter FPGA_FAMILY = 0,
parameter SPEED_GRADE = 0,
parameter DEV_PACKAGE = 0,
parameter DDS_DISABLE = 0,
parameter DDS_TYPE = 1,
parameter DDS_CORDIC_DW = 16,
parameter DDS_CORDIC_PHASE_DW = 16
) (
// DAC INTERFACE
input dac_clk,
input [31:0] dma_data,
input valid_in_dma,
input valid_in_dma_sec,
output dac_data_ready,
input [15:0] data_in_a,
input [15:0] data_in_b,
input valid_in_a,
input valid_in_b,
output dac_sclk,
output dac_csn,
input [ 3:0] sdio_i,
output [ 3:0] sdio_o,
output sdio_t,
// sync transfer between 2 DAC'S
input external_sync,
output sync_ext_device,
// axi interface
input s_axi_aclk,
input s_axi_aresetn,
input s_axi_awvalid,
input [15:0] s_axi_awaddr,
input [ 2:0] s_axi_awprot,
output s_axi_awready,
input s_axi_wvalid,
input [31:0] s_axi_wdata,
input [ 3:0] s_axi_wstrb,
output s_axi_wready,
output s_axi_bvalid,
output [ 1:0] s_axi_bresp,
input s_axi_bready,
input s_axi_arvalid,
input [15:0] s_axi_araddr,
input [ 2:0] s_axi_arprot,
output s_axi_arready,
output s_axi_rvalid,
output [ 1:0] s_axi_rresp,
output [31:0] s_axi_rdata,
input s_axi_rready
);
// internal clocks and resets
wire dac_rst_s;
wire up_clk;
wire up_rstn;
// internal signals
wire up_wreq_s;
wire [13:0] up_waddr_s;
wire [31:0] up_wdata_s;
wire up_wack_s;
wire up_rreq_s;
wire [13:0] up_raddr_s;
wire [31:0] up_rdata_s;
wire up_rack_s;
wire [ 7:0] address;
wire [23:0] data_read;
wire [23:0] data_write;
wire ddr_sdr_n;
wire symb_8_16b;
wire transfer_data;
wire stream;
wire [31:0] dac_data;
wire dac_valid;
wire if_busy;
wire dac_ext_sync_arm;
// signal name changes
assign up_clk = s_axi_aclk;
assign up_rstn = s_axi_aresetn;
// device interface
axi_ad3552r_if axi_ad3552r_interface (
.clk_in(dac_clk),
.reset_in(dac_rst_s),
.dac_data(dac_data),
.dac_data_valid(dac_valid),
.dac_data_valid_ext(valid_in_dma_sec),
.dac_data_ready(dac_data_ready),
.address(address),
.data_read(data_read),
.data_write(data_write),
.sdr_ddr_n(sdr_ddr_n),
.symb_8_16b(symb_8_16b),
.transfer_data(transfer_data),
.stream(stream),
.if_busy(if_busy),
.external_sync(external_sync),
.external_sync_arm(dac_ext_sync_arm),
.sync_ext_device(sync_ext_device),
.sclk(dac_sclk),
.csn(dac_csn),
.sdio_i(sdio_i),
.sdio_o(sdio_o),
.sdio_t(sdio_t));
// core
axi_ad3552r_core #(
.ID(ID),
.FPGA_TECHNOLOGY(FPGA_TECHNOLOGY),
.FPGA_FAMILY(FPGA_FAMILY),
.SPEED_GRADE(SPEED_GRADE),
.DEV_PACKAGE(DEV_PACKAGE),
.DDS_DISABLE(DDS_DISABLE),
.DDS_TYPE(DDS_TYPE),
.DDS_CORDIC_DW(DDS_CORDIC_DW),
.DDS_CORDIC_PHASE_DW(DDS_CORDIC_PHASE_DW)
) axi_ad3552r_up_core (
.dac_clk(dac_clk),
.dac_rst(dac_rst_s),
.adc_data_in_a(data_in_a),
.adc_data_in_b(data_in_b),
.dma_data(dma_data),
.adc_valid_in_a(valid_in_a),
.adc_valid_in_b(valid_in_b),
.valid_in_dma(valid_in_dma),
.dac_data_ready(dac_data_ready),
.dac_data(dac_data),
.dac_valid(dac_valid),
.address(address),
.data_read(data_read),
.data_write(data_write),
.sdr_ddr_n(sdr_ddr_n),
.symb_8_16b(symb_8_16b),
.transfer_data(transfer_data),
.stream(stream),
.dac_ext_sync_arm(dac_ext_sync_arm),
.if_busy(if_busy),
.up_rstn(up_rstn),
.up_clk(up_clk),
.up_wreq(up_wreq_s),
.up_waddr(up_waddr_s),
.up_wdata(up_wdata_s),
.up_wack(up_wack_s),
.up_rreq(up_rreq_s),
.up_raddr(up_raddr_s),
.up_rdata(up_rdata_s),
.up_rack(up_rack_s));
// up bus interface
up_axi i_up_axi(
.up_rstn(up_rstn),
.up_clk(up_clk),
.up_axi_awvalid(s_axi_awvalid),
.up_axi_awaddr(s_axi_awaddr),
.up_axi_awready(s_axi_awready),
.up_axi_wvalid(s_axi_wvalid),
.up_axi_wdata(s_axi_wdata),
.up_axi_wstrb(s_axi_wstrb),
.up_axi_wready(s_axi_wready),
.up_axi_bvalid(s_axi_bvalid),
.up_axi_bresp(s_axi_bresp),
.up_axi_bready(s_axi_bready),
.up_axi_arvalid(s_axi_arvalid),
.up_axi_araddr(s_axi_araddr),
.up_axi_arready(s_axi_arready),
.up_axi_rvalid(s_axi_rvalid),
.up_axi_rresp(s_axi_rresp),
.up_axi_rdata(s_axi_rdata),
.up_axi_rready(s_axi_rready),
.up_wreq(up_wreq_s),
.up_waddr(up_waddr_s),
.up_wdata(up_wdata_s),
.up_wack(up_wack_s),
.up_rreq(up_rreq_s),
.up_raddr(up_raddr_s),
.up_rdata(up_rdata_s),
.up_rack(up_rack_s));
endmodule