pluto_hdl_adi/library/common/util_pulse_gen.v

115 lines
3.8 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright (C) 2014-2023 Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
2018-03-14 14:45:47 +00:00
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/1ps
module util_pulse_gen #(
parameter PULSE_WIDTH = 7,
parameter PULSE_PERIOD = 100000000 // t_period * clk_freq
) (
input clk,
input rstn,
input [31:0] pulse_width,
input [31:0] pulse_period,
input load_config,
output reg pulse,
output [31:0] pulse_counter
);
// internal registers
reg [31:0] pulse_period_cnt = 32'h0;
reg [31:0] pulse_period_read = 32'b0;
reg [31:0] pulse_width_read = 32'b0;
reg [31:0] pulse_period_d = 32'b0;
reg [31:0] pulse_width_d = 32'b0;
// flop the desired period
always @(posedge clk) begin
if (rstn == 1'b0) begin
if (PULSE_PERIOD == 'd0) begin
pulse_period_d <= 32'h1;
pulse_period_read <= 32'h1;
end else begin
pulse_period_d <= PULSE_PERIOD;
pulse_period_read <= PULSE_PERIOD;
end
pulse_width_d <= PULSE_WIDTH;
pulse_width_read <= PULSE_WIDTH;
end else begin
// latch the input period/width values
if (load_config) begin
if (pulse_period == 'd0) begin
pulse_period_read <= 32'h1;
end else begin
pulse_period_read <= pulse_period;
end
pulse_width_read <= pulse_width;
end
// update the current period/width at the end of the period
if (pulse_period_cnt == 32'h1) begin
pulse_period_d <= pulse_period_read;
pulse_width_d <= pulse_width_read;
end
end
end
// a free running counter
always @(posedge clk) begin
if (pulse_period_cnt == 'b0) begin
pulse_period_cnt <= pulse_period_d;
end else begin
pulse_period_cnt <= pulse_period_cnt - 32'b1;
end
end
// generate pulse with a specified width
always @ (posedge clk) begin
if ((pulse_period_cnt == 'h0) || (rstn == 1'b0)) begin
pulse <= 1'b0;
end else if (pulse_period_cnt == pulse_width_d) begin
pulse <= 1'b1;
end
end
assign pulse_counter = pulse_period_cnt;
endmodule