pluto_hdl_adi/projects/dac_fmc_ebz/a10soc/system_project.tcl

119 lines
5.9 KiB
Tcl
Raw Normal View History

###############################################################################
## Copyright (C) 2019-2023 Analog Devices, Inc. All rights reserved.
### SPDX short identifier: ADIBSD
###############################################################################
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl
source ../common/config.tcl
adi_project dac_fmc_ebz_a10soc [list \
JESD_L [get_config_param L] \
MODE $mode \
DEVICE $device \
DEVICE_CODE $device_code \
]
set_global_assignment -name OPTIMIZATION_MODE "BALANCED"
source $ad_hdl_dir/projects/common/a10soc/a10soc_system_assign.tcl
source $ad_hdl_dir/projects/common/a10soc/a10soc_plddr4_assign.tcl
# Note: This projects requires a hardware rework to function correctly.
# The rework connects FMC header pins directly to the FPGA so that they can be
# accessed by the fabric.
#
# Changes required:
# LA01_P_CC
# R612: R0 -> DNI
# R610: DNI -> R0
# LA01_N_CC
# R613: R0 -> DNI
# R611: DNI -> R0
# LA05_P
# R621: R0 -> DNI
# R620: DNI -> R0
# LA05_N
# R633: R0 -> DNI
# R632: DNI -> R0
set_location_assignment PIN_N29 -to tx_ref_clk ; ## D04 FMCA_HPC_GBTCLK0_M2C_P
set_location_assignment PIN_N28 -to "tx_ref_clk(n)" ; ## D05 FMCA_HPC_GBTCLK0_M2C_N
set_location_assignment PIN_N37 -to tx_serial_data[0] ; ## C02 FMCA_HPC_DP0_C2M_P SERDIN7_P
set_location_assignment PIN_N36 -to "tx_serial_data[0](n)"; ## C03 FMCA_HPC_DP0_C2M_N
set_location_assignment PIN_M39 -to tx_serial_data[1] ; ## A22 FMCA_HPC_DP1_C2M_P SERDIN6_P
set_location_assignment PIN_M38 -to "tx_serial_data[1](n)"; ## A23 FMCA_HPC_DP1_C2M_N
set_location_assignment PIN_L37 -to tx_serial_data[2] ; ## A26 FMCA_HPC_DP2_C2M_P SERDIN5_P
set_location_assignment PIN_L36 -to "tx_serial_data[2](n)"; ## A27 FMCA_HPC_DP2_C2M_N
set_location_assignment PIN_K39 -to tx_serial_data[3] ; ## A30 FMCA_HPC_DP3_C2M_P SERDIN4_P
set_location_assignment PIN_K38 -to "tx_serial_data[3](n)"; ## A31 FMCA_HPC_DP3_C2M_N
set_location_assignment PIN_J37 -to tx_serial_data[4] ; ## A34 FMCA_HPC_DP4_C2M_P SERDIN2_N
set_location_assignment PIN_J36 -to "tx_serial_data[4](n)"; ## A35 FMCA_HPC_DP4_C2M_N
set_location_assignment PIN_H39 -to tx_serial_data[5] ; ## A38 FMCA_HPC_DP5_C2M_P SERDIN0_N
set_location_assignment PIN_H38 -to "tx_serial_data[5](n)"; ## A39 FMCA_HPC_DP5_C2M_N
set_location_assignment PIN_G37 -to tx_serial_data[6] ; ## B36 FMCA_HPC_DP6_C2M_P SERDIN1_N
set_location_assignment PIN_G36 -to "tx_serial_data[6](n)"; ## B37 FMCA_HPC_DP6_C2M_N
set_location_assignment PIN_F39 -to tx_serial_data[7] ; ## B32 FMCA_HPC_DP7_C2M_P SERDIN3_N
set_location_assignment PIN_F38 -to "tx_serial_data[7](n)"; ## B33 FMCA_HPC_DP7_C2M_N
set_location_assignment PIN_E12 -to tx_sync ; ## D08 FMCA_HPC_LA01_P
set_location_assignment PIN_E13 -to "tx_sync(n)" ; ## D09 FMCA_HPC_LA01_N
# For AD9161/2/4-FMC-EBZ SYSREF is placed in other place
if {$device_code == 3} {
set_location_assignment PIN_C13 -to tx_sysref ; ## H07 FMCA_HPC_LA02_P
set_location_assignment PIN_D13 -to "tx_sysref(n)" ; ## H08 FMCA_HPC_LA02_N
} else {
set_location_assignment PIN_G14 -to tx_sysref ; ## G06 FMCA_HPC_LA00_P
set_location_assignment PIN_H14 -to "tx_sysref(n)" ; ## G07 FMCA_HPC_LA00_N
}
set_instance_assignment -name IO_STANDARD LVDS -to tx_ref_clk0
set_instance_assignment -name IO_STANDARD LVDS -to "tx_ref_clk0(n)"
set_instance_assignment -name IO_STANDARD "HIGH SPEED DIFFERENTIAL I/O" -to tx_serial_data
set_instance_assignment -name XCVR_VCCR_VCCT_VOLTAGE 1_0V -to tx_serial_data
set_instance_assignment -name IO_STANDARD LVDS -to tx_sync
set_instance_assignment -name IO_STANDARD LVDS -to "tx_sync(n)"
set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to tx_sync
set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to "tx_sync(n)"
set_instance_assignment -name IO_STANDARD LVDS -to tx_sysref
set_instance_assignment -name IO_STANDARD LVDS -to "tx_sysref(n)"
set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to tx_sysref
set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to "tx_sysref(n)"
# gpio
# For AD9135-FMC-EBZ, AD9136-FMC-EBZ, AD9144-FMC-EBZ, AD9152-FMC-EBZ, AD9154-FMC-EBZ
set_location_assignment PIN_A9 -to dac_txen[0] ; ## H13 FMCA_LA07_P
set_location_assignment PIN_B9 -to dac_txen[1] ; ## H14 FMCA_LA07_N
# For AD9171-FMC-EBZ, AD9172-FMC-EBZ, AD9173-FMC-EBZ
set_location_assignment PIN_A10 -to dac_txen[2] ; ## C10 FMCA_LA06_P
set_location_assignment PIN_B10 -to dac_txen[3] ; ## C11 FMCA_LA06_N
set_instance_assignment -name IO_STANDARD "1.8 V" -to dac_txen[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to dac_txen[1]
set_instance_assignment -name IO_STANDARD "1.8 V" -to dac_txen[2]
set_instance_assignment -name IO_STANDARD "1.8 V" -to dac_txen[3]
# spi
set_location_assignment PIN_F14 -to spi_en ; ## D12 FMCA_LA05_N
set_location_assignment PIN_C14 -to spi_clk ; ## G09 FMCA_LA03_P
set_location_assignment PIN_D14 -to spi_mosi ; ## G10 FMCA_LA03_N
set_location_assignment PIN_H12 -to spi_miso ; ## H10 FMCA_LA04_P
set_location_assignment PIN_H13 -to spi_csn_dac ; ## H11 FMCA_LA04_N
set_location_assignment PIN_F13 -to spi_csn_clk ; ## D11 FMCA_LA05_P
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_en_n
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_clk
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_mosi
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_miso
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_csn_clk
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi_csn_dac
set_global_assignment -name PLACEMENT_EFFORT_MULTIPLIER 1.2
execute_flow -compile