zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/pluto/Readme.md

11 lines
601 B
Markdown
Raw Normal View History

start adding some doc to the ./projects directory This adds a Readme.md to each project directory with pointers to project documentation in the wiki, and the drivers (if they exist). This will help with some autogenerated doc in the wiki, that is generated with the innovatily named "wiki_summary.sh" shell script that parses through these Readme.md files, and generates a summary table. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Iacob Liviu Mihai <liviu.iacob@analog.com>
2021-11-01 01:11:05 +00:00
# PLUTO HDL Project
Here are some pointers to help you:
* [Board Product Page](https://www.analog.com/adalm-pluto)
pluto: Enable phaser integration This commit adds support for ADALM-PHASER, allowing the user to choose between the default PlutoSDR mode and Phaser mode through a software controlled GPIO pin: phaser_enable. The Generic TDD Engine was integrated to output a logic signal on the L10P pin, which connects to the input of the ADF4159, when receiving an external synchronization signal on the L12N pin from the Raspberry Pi. Two additional TDD channels are used to synchronize the TX/RX DMA transfer start: - TDD CH1 is connected to the RX DMA, triggering the synchronization flag; - TDD CH2 is connected to the TX unpacker's reset, backpressuring the TX DMA until deasserted. Signed-off-by: Ionut Podgoreanu <ionut.podgoreanu@analog.com>
2023-07-20 12:26:03 +00:00
* [Board Product Page](https://www.analog.com/cn0566)
start adding some doc to the ./projects directory This adds a Readme.md to each project directory with pointers to project documentation in the wiki, and the drivers (if they exist). This will help with some autogenerated doc in the wiki, that is generated with the innovatily named "wiki_summary.sh" shell script that parses through these Readme.md files, and generates a summary table. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Iacob Liviu Mihai <liviu.iacob@analog.com>
2021-11-01 01:11:05 +00:00
* Parts : [RF Agile Transceiver](https://www.analog.com/ad9363)
* Project Doc: https://wiki.analog.com/university/tools/pluto
pluto: Enable phaser integration This commit adds support for ADALM-PHASER, allowing the user to choose between the default PlutoSDR mode and Phaser mode through a software controlled GPIO pin: phaser_enable. The Generic TDD Engine was integrated to output a logic signal on the L10P pin, which connects to the input of the ADF4159, when receiving an external synchronization signal on the L12N pin from the Raspberry Pi. Two additional TDD channels are used to synchronize the TX/RX DMA transfer start: - TDD CH1 is connected to the RX DMA, triggering the synchronization flag; - TDD CH2 is connected to the TX unpacker's reset, backpressuring the TX DMA until deasserted. Signed-off-by: Ionut Podgoreanu <ionut.podgoreanu@analog.com>
2023-07-20 12:26:03 +00:00
* Project Doc: https://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0566
start adding some doc to the ./projects directory This adds a Readme.md to each project directory with pointers to project documentation in the wiki, and the drivers (if they exist). This will help with some autogenerated doc in the wiki, that is generated with the innovatily named "wiki_summary.sh" shell script that parses through these Readme.md files, and generates a summary table. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Iacob Liviu Mihai <liviu.iacob@analog.com>
2021-11-01 01:11:05 +00:00
* HDL Doc: https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/reference_hdl
* Linux Drivers: https://wiki.analog.com/resources/tools-software/linux-drivers/iio-transceiver/ad9361