pluto_hdl_adi/library/common/ad_iqcor.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms. 
// The user should keep this in in mind while exploring these cores. 
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
//  (at the option of the user):
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
//   2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************
// iq correction = a*(i+x) + b*(q+y); offsets are added in dcfilter.

`timescale 1ns/100ps

module ad_iqcor #(

  // select i/q if disabled

  parameter   Q_OR_I_N = 0,
  parameter   DISABLE = 0) (

  // data interface

  input           clk,
  input           valid,
  input   [15:0]  data_in,
  input   [15:0]  data_iq,
  output          valid_out,
  output  [15:0]  data_out,

  // control interface

  input           iqcor_enable,
  input   [15:0]  iqcor_coeff_1,
  input   [15:0]  iqcor_coeff_2);

  // internal registers

  reg             p1_valid = 'd0;
  reg     [15:0]  p1_data_i = 'd0;
  reg     [15:0]  p1_data_q = 'd0;
  reg     [33:0]  p1_data_p = 'd0;
  reg             valid_int = 'd0;
  reg     [15:0]  data_int = 'd0;
  reg     [15:0]  iqcor_coeff_1_r = 'd0;
  reg     [15:0]  iqcor_coeff_2_r = 'd0;

  // internal signals

  wire    [15:0]  data_i_s;
  wire    [15:0]  data_q_s;
  wire    [33:0]  p1_data_p_i_s;
  wire            p1_valid_s;
  wire    [15:0]  p1_data_i_s;
  wire    [33:0]  p1_data_p_q_s;
  wire    [15:0]  p1_data_q_s;

  // data-path disable

  generate
  if (DISABLE == 1) begin
  assign valid_out = valid;
  assign data_out = data_in;
  end else begin
  assign valid_out = valid_int;
  assign data_out = data_int;
  end
  endgenerate

  // swap i & q

  assign data_i_s = (Q_OR_I_N == 1) ? data_iq : data_in;
  assign data_q_s = (Q_OR_I_N == 1) ? data_in : data_iq;

  // coefficients are flopped to remove warnings from vivado

  always @(posedge clk) begin
    iqcor_coeff_1_r <= iqcor_coeff_1;
    iqcor_coeff_2_r <= iqcor_coeff_2;
  end

  // scaling functions - i

  ad_mul #(.DELAY_DATA_WIDTH(17)) i_mul_i (
    .clk (clk),
    .data_a ({data_i_s[15], data_i_s}),
    .data_b ({iqcor_coeff_1_r[15], iqcor_coeff_1_r}),
    .data_p (p1_data_p_i_s),
    .ddata_in ({valid, data_i_s}),
    .ddata_out ({p1_valid_s, p1_data_i_s}));

  // scaling functions - q

  ad_mul #(.DELAY_DATA_WIDTH(16)) i_mul_q (
    .clk (clk),
    .data_a ({data_q_s[15], data_q_s}),
    .data_b ({iqcor_coeff_2_r[15], iqcor_coeff_2_r}),
    .data_p (p1_data_p_q_s),
    .ddata_in (data_q_s),
    .ddata_out (p1_data_q_s));

  // sum

  always @(posedge clk) begin
    p1_valid <= p1_valid_s;
    p1_data_i <= p1_data_i_s;
    p1_data_q <= p1_data_q_s;
    p1_data_p <= p1_data_p_i_s + p1_data_p_q_s;
  end

  // output registers

  always @(posedge clk) begin
    valid_int <= p1_valid;
    if (iqcor_enable == 1'b1) begin
      data_int <= p1_data_p[29:14];
    end else if (Q_OR_I_N == 1) begin
      data_int <= p1_data_q;
    end else begin
      data_int <= p1_data_i;
    end
  end

endmodule

// ***************************************************************************
// ***************************************************************************