pluto_hdl_adi/library/common/pl330_dma_fifo.vhd

141 lines
3.3 KiB
VHDL
Raw Normal View History

library ieee;
use ieee.std_logic_1164.all;
library work;
use work.dma_fifo;
entity pl330_dma_fifo is
generic (
RAM_ADDR_WIDTH : integer := 3;
FIFO_DWIDTH : integer := 32;
FIFO_DIRECTION : integer := 0 -- 0 = write FIFO, 1 = read FIFO
);
port (
clk : in std_logic;
resetn : in std_logic;
fifo_reset : in std_logic;
-- Enable DMA interface
enable : in Boolean;
-- Write port
in_stb : in std_logic;
in_ack : out std_logic;
in_data : in std_logic_vector(FIFO_DWIDTH-1 downto 0);
-- Read port
out_stb : out std_logic;
out_ack : in std_logic;
out_data : out std_logic_vector(FIFO_DWIDTH-1 downto 0);
-- PL330 DMA interface
dclk : in std_logic;
dresetn : in std_logic;
davalid : in std_logic;
daready : out std_logic;
datype : in std_logic_vector(1 downto 0);
drvalid : out std_logic;
drready : in std_logic;
drtype : out std_logic_vector(1 downto 0);
drlast : out std_logic;
DBG : out std_logic_vector(7 downto 0)
);
end;
architecture imp of pl330_dma_fifo is
signal request_data : Boolean;
type state_type is (IDLE, REQUEST, WAITING, FLUSH);
signal state : state_type;
signal i_in_ack : std_logic;
signal i_out_stb : std_logic;
begin
in_ack <= i_in_ack;
out_stb <= i_out_stb;
fifo: entity dma_fifo
generic map (
RAM_ADDR_WIDTH => RAM_ADDR_WIDTH,
FIFO_DWIDTH => FIFO_DWIDTH
)
port map (
clk => clk,
resetn => resetn,
fifo_reset => fifo_reset,
in_stb => in_stb,
in_ack => i_in_ack,
in_data => in_data,
out_stb => i_out_stb,
out_ack => out_ack,
out_data => out_data
);
request_data <= i_in_ack = '1' when FIFO_DIRECTION = 0 else i_out_stb = '1';
drlast <= '0';
daready <= '1';
drvalid <= '1' when (state = REQUEST) or (state = FLUSH) else '0';
drtype <= "00" when state = REQUEST else "10";
DBG(0) <= davalid;
DBG(2 downto 1) <= datype;
DBG(3) <= '1' when request_data else '0';
process (state)
begin
case state is
when IDLE => DBG(5 downto 4) <= "00";
when REQUEST => DBG(5 downto 4) <= "01";
when WAITING => DBG(5 downto 4) <= "10";
when FLUSH => DBG(5 downto 4) <= "11";
end case;
end process;
pl330_req_fsm: process (dclk) is
begin
if rising_edge(dclk) then
if dresetn = '0' then
state <= IDLE;
else
-- The controller may send a FLUSH request at any time and it won't
-- respond to any of our requests until we've ack the FLUSH request.
-- The FLUSH request is also supposed to reset our state machine, so
-- go back to idle after having acked the FLUSH.
if davalid = '1' and datype = "10" then
state <= FLUSH;
else
case state is
-- Nothing to do, wait for the fifo to run empty
when IDLE =>
if request_data and enable then
state <= REQUEST;
end if;
-- Send out a request to the PL330
when REQUEST =>
if drready = '1' then
state <= WAITING;
end if;
-- Wait for a ACK from the PL330 that it did transfer the data
when WAITING =>
if fifo_reset = '1' then
state <= IDLE;
elsif davalid = '1' then
if datype = "00" then
state <= IDLE;
end if;
end if;
-- Send out an ACK for the flush
when FLUSH =>
if drready = '1' then
state <= IDLE;
end if;
end case;
end if;
end if;
end if;
end process;
end;