zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/ad40xx_fmc/zed/system_bd.tcl

30 lines
1.1 KiB
Tcl
Raw Normal View History

ad40xx: Initial commit
2017-11-14 12:57:24 +00:00
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
ad40xx: Fix bd.tcl script
2020-10-29 09:57:19 +00:00
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
ad40xx: Initial commit
2017-11-14 12:57:24 +00:00
# specify the spi reference clock frequency in MHz
ad40xx/zed: fixed system_bd spi_engine_execution: fixed sdo default
2019-05-29 08:18:52 +00:00
set spi_clk_ref_frequency 166
ad40xx: Initial commit
2017-11-14 12:57:24 +00:00
# specify ADC resolution -- supported resolutions 16/18/20 bits
ad400xx_fmc: Parametrize board select, sampling rate and adc resolution fix comments
2021-08-30 13:14:12 +00:00
set ADC_RESOLUTION [get_env_param ADC_RESOLUTION 20]
ad40xx: Initial commit
2017-11-14 12:57:24 +00:00
# specify ADC sampling rate in samples/seconds
# NOTE: This rate can be set just in turbo mode -- if turbo mode is not used
# the max rate should be 1.6 MSPS
ad400xx_fmc: Parametrize board select, sampling rate and adc resolution fix comments
2021-08-30 13:14:12 +00:00
# supported sampling rates: 2/1.8/1/0.5 MSPS depending on the board
set ADC_SAMPLING_RATE [get_env_param ADC_SAMPLING_RATE 1800000]
ad40xx: Initial commit
2017-11-14 12:57:24 +00:00
source ../common/ad40xx_bd.tcl
Updated the makefiles to build the projects in subdirectories based on the build parameters. Running 'make' will build the default project directly in the project folder (like it did before) Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory. Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory. Running 'make clean' will clean the default project only. Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build. Running 'make clean-all' will delete all the built configurations and libraries. Note that the 'JESD' and 'LANE' words from the parameter names are stripped. Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-09-23 09:28:22 +00:00
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
system_id: deployed ip
2019-06-28 08:41:21 +00:00
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
Updated the makefiles to build the projects in subdirectories based on the build parameters. Running 'make' will build the default project directly in the project folder (like it did before) Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory. Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory. Running 'make clean' will clean the default project only. Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build. Running 'make clean-all' will delete all the built configurations and libraries. Note that the 'JESD' and 'LANE' words from the parameter names are stripped. Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-09-23 09:28:22 +00:00
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
system_id: deployed ip
2019-06-28 08:41:21 +00:00
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid: Remove cstring init string
2020-09-28 21:10:35 +00:00
ad400xx_fmc: Parametrize board select, sampling rate and adc resolution fix comments
2021-08-30 13:14:12 +00:00
set AD40XX_ADAQ400X_N [get_env_param AD40XX_ADAQ400X_N 1]
set sys_cstring "ad40xx: $AD40XX_ADAQ400X_N - adc_sampling_rate: $ADC_SAMPLING_RATE - adc_resolution: $ADC_RESOLUTION"
sysid_gen_sys_init_file $sys_cstring
system_id: deployed ip
2019-06-28 08:41:21 +00:00