pluto_hdl_adi/projects/adrv9009/zcu102/system_project.tcl

source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

# get_env_param retrieves parameter value from the environment if exists,
# other case use the default value
#
#   Use over-writable parameters from the environment.
#
#    e.g.
#      make TX_JESD_L=2 RX_OS_JESD_M=4
#      make TX_JESD_M=4 TX_JESD_L=2 RX_JESD_M=4 RX_JESD_L=1 RX_OS_JESD_M=2 RX_OS_JESD_L=1
#      make TX_JESD_M=2 TX_JESD_L=1 RX_JESD_M=4 RX_JESD_L=1 RX_OS_JESD_M=2 RX_OS_JESD_L=1

# Parameter description:
#   [TX/RX/RX_OS]_JESD_M : Number of converters per link
#   [TX/RX/RX_OS]_JESD_L : Number of lanes per link
#   [TX/RX/RX_OS]_JESD_S : Number of samples per frame
#   [TX/RX/RX_OS]_JESD_NP : Number of bits per sample

adi_project adrv9009_zcu102 0 [list \
  TX_JESD_M       [get_env_param TX_JESD_M       4 ] \
  TX_JESD_L       [get_env_param TX_JESD_L       4 ] \
  TX_JESD_S       [get_env_param TX_JESD_S       1 ] \
  RX_JESD_M       [get_env_param RX_JESD_M       4 ] \
  RX_JESD_L       [get_env_param RX_JESD_L       2 ] \
  RX_JESD_S       [get_env_param RX_JESD_S       1 ] \
  RX_OS_JESD_M    [get_env_param RX_OS_JESD_M    2 ] \
  RX_OS_JESD_L    [get_env_param RX_OS_JESD_L    2 ] \
  RX_OS_JESD_S    [get_env_param RX_OS_JESD_S    1 ] \
]

adi_project_files adrv9009_zcu102 [list \
  "system_top.v" \
  "system_constr.xdc"\
  "$ad_hdl_dir/library/common/ad_iobuf.v" \
  "$ad_hdl_dir/library/common/ad_bus_mux.v" \
  "$ad_hdl_dir/library/common/util_pulse_gen.v" \
  "$ad_hdl_dir/projects/common/zcu102/zcu102_system_constr.xdc" ]

## To improve timing of the BRAM buffers
set_property strategy Performance_RefinePlacement [get_runs impl_1]

adi_project_run adrv9009_zcu102