zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/adrv9009zu11eg/adrv2crr_fmcomms8/system_project.tcl

45 lines
1.6 KiB
Tcl
Raw Normal View History

scripts: Merge adi_env.tcl into a single file Move the new adi_env.tcl file from hdl/projects/scripts into hdl/scrips
2022-07-12 11:06:15 +00:00
source ../../../scripts/adi_env.tcl
adrv9009zu11eg: Add FMCOMMS8 support
2020-02-03 09:08:30 +00:00
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl
projects: 9009: system_project.tcl: List configs as comments Add a list with make commands with the proper parameters for each devicetree availible at the moment. Signed-off-by: LIacob106 <liviu.iacob@analog.com>
2022-11-29 16:51:57 +00:00
# get_env_param retrieves parameter value from the environment if exists,
# other case use the default value
#
# Use over-writable parameters from the environment.
#
# e.g.
# make TX_JESD_L=8 RX_OS_JESD_M=16
# make TX_JESD_M=16 TX_JESD_L=8 RX_JESD_M=16 RX_JESD_L=4 RX_OS_JESD_M=8 RX_OS_JESD_L=4
# make TX_JESD_M=8 TX_JESD_L=4 RX_JESD_M=16 RX_JESD_L=4 RX_OS_JESD_M=8 RX_OS_JESD_L=4
# Parameter description:
# [TX/RX/RX_OS]_JESD_M : Number of converters per link
# [TX/RX/RX_OS]_JESD_L : Number of lanes per link
# [TX/RX/RX_OS]_JESD_S : Number of samples per frame
# [TX/RX/RX_OS]_JESD_NP : Number of bits per sample
#
adrv9009zu11eg: Use adi_project_create instead of adi_project
2021-01-14 16:22:15 +00:00
adi_project_create fmcomms8_adrv9009zu11eg 0 [list \
projects/adrv9009zu11eg: expose jesd params to make and add FMCOMMS8 parameter Expose JESD parameters to make. Add FMCOMMS8 parameter. Changed the name of the observation path to match the rest of the repo. Replace old dac_data_width formula with a more generic one.
2022-09-07 11:49:49 +00:00
RX_JESD_M [get_env_param RX_JESD_M 16 ] \
RX_JESD_L [get_env_param RX_JESD_L 8 ] \
RX_JESD_S [get_env_param RX_JESD_S 1 ] \
TX_JESD_M [get_env_param TX_JESD_M 16 ] \
TX_JESD_L [get_env_param TX_JESD_L 16 ] \
TX_JESD_S [get_env_param TX_JESD_S 1 ] \
RX_OS_JESD_M [get_env_param RX_OS_JESD_M 8 ] \
RX_OS_JESD_L [get_env_param RX_OS_JESD_L 8 ] \
RX_OS_JESD_S [get_env_param RX_OS_JESD_S 1 ] \
adrv9009zu11eg: Use adi_project_create instead of adi_project
2021-01-14 16:22:15 +00:00
] "xczu11eg-ffvf1517-2-i"
adrv9009zu11eg: Add FMCOMMS8 support
2020-02-03 09:08:30 +00:00
Updated the makefiles to build the projects in subdirectories based on the build parameters. Running 'make' will build the default project directly in the project folder (like it did before) Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory. Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory. Running 'make clean' will clean the default project only. Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build. Running 'make clean-all' will delete all the built configurations and libraries. Note that the 'JESD' and 'LANE' words from the parameter names are stripped. Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-09-23 09:28:22 +00:00
adi_project_files fmcomms8_adrv9009zu11eg [list \
adrv9009zu11eg: Add FMCOMMS8 support
2020-02-03 09:08:30 +00:00
"system_top.v" \
"fmcomms8_constr.xdc"\
"../common/adrv9009zu11eg_spi.v" \
"../common/adrv9009zu11eg_constr.xdc" \
"../common/adrv2crr_fmc_constr.xdc" \
library: Move ad_iobuf to the common library, as it's not Xilinx specific Updated all system_project and Makefiles
2020-09-23 08:30:18 +00:00
"$ad_hdl_dir/library/common/ad_iobuf.v" \
adrv9009zu11eg: Add FMCOMMS8 support
2020-02-03 09:08:30 +00:00
]
adi_project_run fmcomms8_adrv9009zu11eg