pluto_hdl_adi/library/axi_dmac/dest_fifo_inf.v

143 lines
3.8 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
2018-03-14 14:45:47 +00:00
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
module dmac_dest_fifo_inf #(
parameter ID_WIDTH = 3,
parameter DATA_WIDTH = 64,
parameter BEATS_PER_BURST_WIDTH = 4)(
input clk,
input resetn,
input enable,
output enabled,
input req_valid,
output req_ready,
output [ID_WIDTH-1:0] response_id,
output reg [ID_WIDTH-1:0] data_id = 'h0,
input data_eot,
input response_eot,
input en,
output reg [DATA_WIDTH-1:0] dout,
output reg valid,
output reg underflow,
output xfer_req,
output fifo_ready,
input fifo_valid,
input [DATA_WIDTH-1:0] fifo_data,
input fifo_last,
output response_valid,
input response_ready,
output response_resp_eot,
output [1:0] response_resp
);
`include "inc_id.vh"
reg active = 1'b0;
/* Last beat of the burst */
wire fifo_last_beat;
/* Last beat of the segment */
wire fifo_eot_beat;
assign enabled = enable;
assign fifo_ready = en & (fifo_valid | ~enable);
/* fifo_last == 1'b1 implies fifo_valid == 1'b1 */
assign fifo_last_beat = fifo_ready & fifo_last;
assign fifo_eot_beat = fifo_last_beat & data_eot;
assign req_ready = fifo_eot_beat | ~active;
assign xfer_req = active;
always @(posedge clk) begin
if (en) begin
dout <= fifo_valid ? fifo_data : {DATA_WIDTH{1'b0}};
valid <= fifo_valid & enable;
underflow <= ~(fifo_valid & enable);
end else begin
valid <= 1'b0;
underflow <= 1'b0;
end
end
always @(posedge clk) begin
if (resetn == 1'b0) begin
data_id <= 'h00;
end else if (fifo_last_beat == 1'b1) begin
data_id <= inc_id(data_id);
end
end
always @(posedge clk) begin
if (resetn == 1'b0) begin
active <= 1'b0;
end else if (req_valid == 1'b1) begin
active <= 1'b1;
end else if (fifo_eot_beat == 1'b1) begin
active <= 1'b0;
end
end
dmac_response_generator # (
.ID_WIDTH(ID_WIDTH)
) i_response_generator (
.clk(clk),
.resetn(resetn),
.enable(enable),
.enabled(),
.request_id(data_id),
.response_id(response_id),
.eot(response_eot),
.resp_valid(response_valid),
.resp_ready(response_ready),
.resp_eot(response_resp_eot),
.resp_resp(response_resp)
);
endmodule