pluto_hdl_adi/library/data_offload/data_offload_regmap.v

379 lines
10 KiB
Coq
Raw Normal View History

2021-03-15 08:50:39 +00:00
// ***************************************************************************
// ***************************************************************************
// Copyright 2018 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module data_offload_regmap #(
parameter ID = 0,
parameter [ 0:0] MEM_TYPE = 1'b0,
parameter [33:0] MEM_SIZE = 1024,
parameter TX_OR_RXN_PATH = 0,
parameter AUTO_BRINGUP = 0) (
// microprocessor interface
input up_clk,
input up_rstn,
input up_rreq,
output reg up_rack,
input [13:0] up_raddr,
output reg [31:0] up_rdata,
input up_wreq,
output reg up_wack,
input [13:0] up_waddr,
input [31:0] up_wdata,
// source clock domain
input src_clk,
// destination clock domain
input dst_clk,
// resets for all clock domains
output reg src_sw_resetn,
output reg dst_sw_resetn,
// status bit from the memory controller
input ddr_calib_done,
// bypass control
output src_bypass,
output dst_bypass,
output oneshot,
// synchronization
output sync,
output [ 1:0] sync_config,
2021-03-19 08:11:42 +00:00
output reg [31:0] src_transfer_length,
2021-03-15 08:50:39 +00:00
// FSM control and status
input [ 1:0] src_fsm_status,
input [ 1:0] dst_fsm_status,
input [31:0] sample_count_msb,
input [31:0] sample_count_lsb
);
// local parameters
localparam [31:0] CORE_VERSION = 32'h00010061; // 1.00.a
2021-03-15 08:50:39 +00:00
localparam [31:0] CORE_MAGIC = 32'h44414F46; // DAOF
// internal registers
reg [31:0] up_scratch = 'd0;
reg up_sw_resetn = 'd0;
reg up_bypass = 'd0;
reg up_sync = 'd0;
reg [ 1:0] up_sync_config = 'd0;
reg up_oneshot = 1'b0;
reg [31:0] up_transfer_length = 'd0;
//internal signals
wire up_ddr_calib_done_s;
wire [ 1:0] up_wr_fsm_status_s;
wire [ 1:0] up_rd_fsm_status_s;
wire [31:0] up_sample_count_msb_s;
wire [31:0] up_sample_count_lsb_s;
wire src_sw_resetn_s;
wire dst_sw_resetn_s;
2021-03-19 08:11:42 +00:00
wire [31:0] src_transfer_length_s;
2021-03-15 08:50:39 +00:00
// write interface
always @(posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_wack <= up_wreq;
up_scratch <= 'd0;
up_sw_resetn <= AUTO_BRINGUP;
up_oneshot <= ~TX_OR_RXN_PATH;
up_bypass <= 'd0;
up_sync <= 'd0;
up_sync_config <= 'd0;
up_transfer_length <= 32'h0;
end else begin
up_wack <= up_wreq;
/* Scratch Register */
if ((up_wreq == 1'b1) && (up_waddr[11:0] == 14'h02)) begin
up_scratch <= up_wdata;
end
/* Transfer Length Register */
if ((up_wreq == 1'b1) && (up_waddr[11:0] == 14'h07)) begin
up_transfer_length <= up_wdata;
end
/* Reset Offload Register */
if ((up_wreq == 1'b1) && (up_waddr[11:0] == 14'h21)) begin
up_sw_resetn <= up_wdata[0];
end
/* Control Register */
if ((up_wreq == 1'b1) && (up_waddr[11:0] == 14'h22)) begin
up_oneshot <= up_wdata[1];
up_bypass <= up_wdata[0];
end
/* SYNC Offload Register - self cleared, one pulse signal */
if ((up_wreq == 1'b1) && (up_waddr[11:0] == 14'h40)) begin
up_sync <= up_wdata[0];
end else begin
up_sync <= 1'b0;
end
/* SYNC RX Configuration Register */
if ((up_wreq == 1'b1) && (up_waddr[11:0] == 14'h41)) begin
up_sync_config <= up_wdata[1:0];
end
end
end
//read interface for common registers
always @(posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_rack <= 1'b0;
up_rdata <= 14'b0;
end else begin
up_rack <= up_rreq;
case(up_raddr)
/* Version Register */
14'h000: up_rdata <= {
CORE_VERSION[31:16], /* MAJOR */
CORE_VERSION[15: 8], /* MINOR */
CORE_VERSION[ 7: 0] /* PATCH */
};
/* Peripheral ID Register */
14'h001: up_rdata <= ID;
/* Peripheral ID Register */
14'h002: up_rdata <= up_scratch;
/* Identification Register */
14'h003: up_rdata <= CORE_MAGIC;
/* Configuration Register */
14'h004: up_rdata <= {
30'b0,
/* 1 */ TX_OR_RXN_PATH[0],
/* 0 */ MEM_TYPE[0]
2021-03-15 08:50:39 +00:00
};
/* Configuration Storage Unit Size LSB Register */
14'h005: up_rdata <= MEM_SIZE[31:0];
/* Configuration Storage Unit Size MSB Register */
14'h006: up_rdata <= {
30'b0,
2021-03-15 08:50:39 +00:00
/* 00-01 */ MEM_SIZE[33:32]
};
/* Configuration data transfer length */
14'h007: up_rdata <= up_transfer_length;
/* 0x08-0x1f reserved for future use */
/* Memory Physical Interface Status */
14'h020: up_rdata <= {
31'b0,
/* 0 */ up_ddr_calib_done_s
};
/* Reset Offload Register */
14'h021: up_rdata <= {
31'b0,
/* 0 */ up_sw_resetn
};
/* Control Register */
14'h022: up_rdata <= {
30'b0,
/* 1 */ up_oneshot,
/* 0 */ up_bypass
};
/* 0x24-0x3f reserved for future use */
/* SYNC Offload Register */
14'h040: up_rdata <= {
31'b0,
/* 0 */ up_sync
};
/* SYNC RX Configuration Register */
14'h041: up_rdata <= {
30'b0,
/* 00-01 */ up_sync_config
};
/* 0x42-0x7f reserved for future use */
/* FMS Debug Register */
14'h080: up_rdata <= {
24'b0,
2021-03-15 08:50:39 +00:00
/* 07-06 */ 2'b0,
/* 05-04 */ up_rd_fsm_status_s,
/* 03-02 */ 2'b0,
/* 01-00 */ up_wr_fsm_status_s
};
/* Sample Count LSB Register */
14'h081: up_rdata <= up_sample_count_lsb_s;
/* Sample Count MSB Register */
14'h082: up_rdata <= up_sample_count_msb_s;
default: up_rdata <= 32'h00000000;
endcase
end
end /* read interface */
// Clock Domain Crossing Logic for reset, control and status signals
sync_data #(
.NUM_OF_BITS (2),
.ASYNC_CLK (1))
i_dst_fsm_status (
.in_clk (dst_clk),
.in_data (dst_fsm_status),
.out_clk (up_clk),
.out_data (up_rd_fsm_status_s)
);
sync_data #(
.NUM_OF_BITS (2),
.ASYNC_CLK (1))
i_src_fsm_status (
.in_clk (src_clk),
.in_data (src_fsm_status),
.out_clk (up_clk),
.out_data (up_wr_fsm_status_s)
);
sync_data #(
.NUM_OF_BITS (64),
.ASYNC_CLK (1))
i_xfer_status (
.in_clk (src_clk),
.in_data ({sample_count_msb,
sample_count_lsb}),
.out_clk (up_clk),
.out_data ({up_sample_count_msb_s,
up_sample_count_lsb_s})
);
generate
if (TX_OR_RXN_PATH) begin : sync_tx_path
sync_data #(
.NUM_OF_BITS (3),
.ASYNC_CLK (1))
i_sync_xfer_control (
.in_clk (up_clk),
.in_data ({up_sync_config,
up_sync}),
.out_clk (dst_clk),
.out_data ({sync_config,
sync})
);
end else begin : sync_rx_path
sync_data #(
.NUM_OF_BITS (3),
.ASYNC_CLK (1))
i_sync_xfer_control (
.in_clk (up_clk),
.in_data ({up_sync_config,
up_sync}),
.out_clk (src_clk),
.out_data ({sync_config,
sync})
);
end
endgenerate
sync_bits #(
.NUM_OF_BITS (2),
.ASYNC_CLK (1))
i_src_xfer_control (
.in_bits ({ up_sw_resetn, up_bypass }),
.out_clk (src_clk),
.out_resetn (1'b1),
.out_bits ({ src_sw_resetn_s, src_bypass })
);
sync_bits #(
.NUM_OF_BITS (2),
.ASYNC_CLK (1))
i_dst_xfer_control (
.in_bits ({ up_sw_resetn, up_bypass }),
.out_clk (dst_clk),
.out_resetn (1'b1),
.out_bits ({ dst_sw_resetn_s, dst_bypass })
);
sync_bits #(
.NUM_OF_BITS (1),
.ASYNC_CLK (1))
i_ddr_calib_done_sync (
.in_bits (ddr_calib_done),
.out_clk (up_clk),
.out_resetn (1'b1),
.out_bits (up_ddr_calib_done_s)
);
sync_bits #(
.NUM_OF_BITS (1),
.ASYNC_CLK (1))
i_dst_oneshot_sync (
.in_bits (up_oneshot),
.out_clk (dst_clk),
.out_resetn (1'b1),
.out_bits (oneshot)
);
sync_data #(
.NUM_OF_BITS (32),
.ASYNC_CLK (1))
i_sync_src_transfer_length (
.in_clk (up_clk),
.in_data (up_transfer_length),
.out_clk (src_clk),
2021-03-19 08:11:42 +00:00
.out_data (src_transfer_length_s)
2021-03-15 08:50:39 +00:00
);
always @(posedge src_clk) begin
src_sw_resetn <= src_sw_resetn_s;
2021-03-19 08:11:42 +00:00
src_transfer_length <= src_transfer_length_s;
2021-03-15 08:50:39 +00:00
end
always @(posedge dst_clk) begin
dst_sw_resetn <= dst_sw_resetn_s;
end
endmodule