zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/common/zc706/zc706_system_bd.tcl

234 lines
8.4 KiB
Tcl
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# create board design
# default ports
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 ddr
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:iic_rtl:1.0 iic_main
create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:fixedio_rtl:1.0 fixed_io
create_bd_port -dir O spi0_csn_2_o
create_bd_port -dir O spi0_csn_1_o
create_bd_port -dir O spi0_csn_0_o
create_bd_port -dir I spi0_csn_i
create_bd_port -dir I spi0_clk_i
create_bd_port -dir O spi0_clk_o
create_bd_port -dir I spi0_sdo_i
create_bd_port -dir O spi0_sdo_o
create_bd_port -dir I spi0_sdi_i
create_bd_port -dir O spi1_csn_2_o
create_bd_port -dir O spi1_csn_1_o
create_bd_port -dir O spi1_csn_0_o
create_bd_port -dir I spi1_csn_i
create_bd_port -dir I spi1_clk_i
create_bd_port -dir O spi1_clk_o
create_bd_port -dir I spi1_sdo_i
create_bd_port -dir O spi1_sdo_o
create_bd_port -dir I spi1_sdi_i
create_bd_port -dir I -from 63 -to 0 gpio_i
create_bd_port -dir O -from 63 -to 0 gpio_o
create_bd_port -dir O -from 63 -to 0 gpio_t
# hdmi interface
create_bd_port -dir O hdmi_out_clk
create_bd_port -dir O hdmi_hsync
create_bd_port -dir O hdmi_vsync
create_bd_port -dir O hdmi_data_e
create_bd_port -dir O -from 23 -to 0 hdmi_data
# spdif audio
create_bd_port -dir O spdif
# instance: sys_ps7
zc706- ad-ip-instance & ad-ip-parameter
2017-04-06 17:03:22 +00:00
ad_ip_instance processing_system7 sys_ps7
ad_ip_parameter sys_ps7 CONFIG.preset ZC706
ad_ip_parameter sys_ps7 CONFIG.PCW_TTC0_PERIPHERAL_ENABLE 0
ad_ip_parameter sys_ps7 CONFIG.PCW_EN_CLK1_PORT 1
ad_ip_parameter sys_ps7 CONFIG.PCW_EN_RST1_PORT 1
ad_ip_parameter sys_ps7 CONFIG.PCW_EN_CLK2_PORT 1
ad_ip_parameter sys_ps7 CONFIG.PCW_EN_RST2_PORT 1
ad_ip_parameter sys_ps7 CONFIG.PCW_FPGA0_PERIPHERAL_FREQMHZ 100.0
ad_ip_parameter sys_ps7 CONFIG.PCW_FPGA1_PERIPHERAL_FREQMHZ 200.0
ad_ip_parameter sys_ps7 CONFIG.PCW_USE_FABRIC_INTERRUPT 1
ad_ip_parameter sys_ps7 CONFIG.PCW_IRQ_F2P_INTR 1
ad_ip_parameter sys_ps7 CONFIG.PCW_GPIO_EMIO_GPIO_ENABLE 1
ad_ip_parameter sys_ps7 CONFIG.PCW_GPIO_EMIO_GPIO_IO 64
ad_ip_parameter sys_ps7 CONFIG.PCW_USE_DMA0 1
ad_ip_parameter sys_ps7 CONFIG.PCW_IRQ_F2P_MODE REVERSE
ad_ip_parameter sys_ps7 CONFIG.PCW_SPI0_PERIPHERAL_ENABLE 1
ad_ip_parameter sys_ps7 CONFIG.PCW_SPI0_SPI0_IO EMIO
ad_ip_parameter sys_ps7 CONFIG.PCW_SPI1_PERIPHERAL_ENABLE 1
ad_ip_parameter sys_ps7 CONFIG.PCW_SPI1_SPI1_IO EMIO
ad_ip_instance axi_iic axi_iic_main
ad_ip_parameter axi_iic_main CONFIG.USE_BOARD_FLOW true
ad_ip_parameter axi_iic_main CONFIG.IIC_BOARD_INTERFACE Custom
ad_ip_instance xlconcat sys_concat_intc
ad_ip_parameter sys_concat_intc CONFIG.NUM_PORTS 16
ad_ip_instance proc_sys_reset sys_rstgen
ad_ip_parameter sys_rstgen CONFIG.C_EXT_RST_WIDTH 1
base: Add system_processor_rst for all the global clocks
2019-05-29 06:16:36 +00:00
ad_ip_instance proc_sys_reset sys_200m_rstgen
ad_ip_parameter sys_200m_rstgen CONFIG.C_EXT_RST_WIDTH 1
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# hdmi peripherals
zc706- ad-ip-instance & ad-ip-parameter
2017-04-06 17:03:22 +00:00
ad_ip_instance axi_clkgen axi_hdmi_clkgen
ad_ip_instance axi_hdmi_tx axi_hdmi_core
axi_hdmi_tx: Added INTERFACE parameter for selecting the interface type Update all carriers/projects bd for configurable video interface: - common zc702, zc706, zed - adrv9361z7035/ccfmc_lvds - imageon
2018-07-23 12:21:44 +00:00
ad_ip_parameter axi_hdmi_core CONFIG.INTERFACE 24_BIT
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
common/zc706: Replace VDMA with ADI DMAC
2018-05-16 13:56:12 +00:00
ad_ip_instance axi_dmac axi_hdmi_dma
ad_ip_parameter axi_hdmi_dma CONFIG.DMA_TYPE_SRC 0
ad_ip_parameter axi_hdmi_dma CONFIG.DMA_TYPE_DEST 1
ad_ip_parameter axi_hdmi_dma CONFIG.CYCLIC true
ad_ip_parameter axi_hdmi_dma CONFIG.AXI_SLICE_SRC 0
ad_ip_parameter axi_hdmi_dma CONFIG.AXI_SLICE_DEST 0
ad_ip_parameter axi_hdmi_dma CONFIG.DMA_2D_TRANSFER true
ad_ip_parameter axi_hdmi_dma CONFIG.DMA_DATA_WIDTH_SRC 64
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# audio peripherals
zc706- ad-ip-instance & ad-ip-parameter
2017-04-06 17:03:22 +00:00
ad_ip_instance clk_wiz sys_audio_clkgen
ad_ip_parameter sys_audio_clkgen CONFIG.CLKOUT1_REQUESTED_OUT_FREQ 12.288
ad_ip_parameter sys_audio_clkgen CONFIG.USE_LOCKED false
ad_ip_parameter sys_audio_clkgen CONFIG.USE_RESET true
common: zed/zc702/zc706/mitx045: audio_clkgen: Disable phase alignment There is no need for the audio clock to be phase aligned to its source clock. When phase alignment is disabled the MMCM uses an internal feedback path without requiring external resources, so disable it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-20 15:26:02 +00:00
ad_ip_parameter sys_audio_clkgen CONFIG.USE_PHASE_ALIGNMENT false
zc706- ad-ip-instance & ad-ip-parameter
2017-04-06 17:03:22 +00:00
ad_ip_parameter sys_audio_clkgen CONFIG.RESET_TYPE ACTIVE_LOW
common: zed/zc702/zc706/mitx045: Set audio clkgen clock source type Depending on the configuration of the clock source type of the input clock the clocking wizard will instantiate all kinds of buffers on the input clock signal. For these particular projects there is no need to add any kind of buffer since the source is already coming from a global clock buffer. So set the configuration accordingly. Avoids the following warning: [Opt 31-32] Removing redundant IBUF since it is not being driven by a top-level port. i_system_wrapper/system_i/sys_audio_clkgen/inst/clkin1_ibufg Resolution: The tool has removed redundant IBUF. To resolve this warning, check for redundant IBUF in the input design. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-20 14:54:47 +00:00
ad_ip_parameter sys_audio_clkgen CONFIG.PRIM_SOURCE No_buffer
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
zc706- ad-ip-instance & ad-ip-parameter
2017-04-06 17:03:22 +00:00
ad_ip_instance axi_spdif_tx axi_spdif_tx_core
ad_ip_parameter axi_spdif_tx_core CONFIG.DMA_TYPE 1
ad_ip_parameter axi_spdif_tx_core CONFIG.S_AXI_ADDRESS_WIDTH 16
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# system reset/clock definitions
ad_connect sys_cpu_clk sys_ps7/FCLK_CLK0
ad_connect sys_200m_clk sys_ps7/FCLK_CLK1
ad_connect sys_cpu_reset sys_rstgen/peripheral_reset
ad_connect sys_cpu_resetn sys_rstgen/peripheral_aresetn
ad_connect sys_cpu_clk sys_rstgen/slowest_sync_clk
ad_connect sys_rstgen/ext_reset_in sys_ps7/FCLK_RESET0_N
base: Add system_processor_rst for all the global clocks
2019-05-29 06:16:36 +00:00
ad_connect sys_200m_reset sys_200m_rstgen/peripheral_reset
ad_connect sys_200m_resetn sys_200m_rstgen/peripheral_aresetn
ad_connect sys_200m_clk sys_200m_rstgen/slowest_sync_clk
ad_connect sys_200m_rstgen/ext_reset_in sys_ps7/FCLK_RESET1_N
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
common: Define three global clock nets For all the Xilinx base design, define three global clock nets, which are saved in the following three global variable: $sys_cpu_clk, $sys_dma_clk and $sys_iodelay_clk. These clock nets are connected to different clock sources depending of the FPGA architecture used on the carrier. In general the following frequencies are used: - sys_cpu_clk - 100MHz - sys_dma_clk - 200MHz or 250Mhz - sys_iodelay_clk - 200MHz or 500Mhz
2019-05-27 09:52:27 +00:00
# generic system clocks pointers
set sys_cpu_clk [get_bd_nets sys_cpu_clk]
set sys_dma_clk [get_bd_nets sys_200m_clk]
set sys_iodelay_clk [get_bd_nets sys_200m_clk]
block_design: Updates with new reset net variables
2019-05-30 06:43:44 +00:00
set sys_cpu_reset [get_bd_nets sys_cpu_reset]
set sys_cpu_resetn [get_bd_nets sys_cpu_resetn]
set sys_dma_reset [get_bd_nets sys_200m_reset]
set sys_dma_resetn [get_bd_nets sys_200m_resetn]
set sys_iodelay_reset [get_bd_nets sys_200m_reset]
set sys_iodelay_resetn [get_bd_nets sys_200m_resetn]
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# interface connections
ad_connect ddr sys_ps7/DDR
ad_connect gpio_i sys_ps7/GPIO_I
ad_connect gpio_o sys_ps7/GPIO_O
ad_connect gpio_t sys_ps7/GPIO_T
ad_connect fixed_io sys_ps7/FIXED_IO
ad_connect iic_main axi_iic_main/iic
ad_connect sys_200m_clk axi_hdmi_clkgen/clk
# spi connections
ad_connect spi0_csn_2_o sys_ps7/SPI0_SS2_O
ad_connect spi0_csn_1_o sys_ps7/SPI0_SS1_O
ad_connect spi0_csn_0_o sys_ps7/SPI0_SS_O
ad_connect spi0_csn_i sys_ps7/SPI0_SS_I
ad_connect spi0_clk_i sys_ps7/SPI0_SCLK_I
ad_connect spi0_clk_o sys_ps7/SPI0_SCLK_O
ad_connect spi0_sdo_i sys_ps7/SPI0_MOSI_I
ad_connect spi0_sdo_o sys_ps7/SPI0_MOSI_O
ad_connect spi0_sdi_i sys_ps7/SPI0_MISO_I
ad_connect spi1_csn_2_o sys_ps7/SPI1_SS2_O
ad_connect spi1_csn_1_o sys_ps7/SPI1_SS1_O
ad_connect spi1_csn_0_o sys_ps7/SPI1_SS_O
ad_connect spi1_csn_i sys_ps7/SPI1_SS_I
ad_connect spi1_clk_i sys_ps7/SPI1_SCLK_I
ad_connect spi1_clk_o sys_ps7/SPI1_SCLK_O
ad_connect spi1_sdo_i sys_ps7/SPI1_MOSI_I
ad_connect spi1_sdo_o sys_ps7/SPI1_MOSI_O
ad_connect spi1_sdi_i sys_ps7/SPI1_MISO_I
# hdmi
hdmi-tx- signal name changes
2015-08-28 17:48:12 +00:00
ad_connect sys_cpu_clk axi_hdmi_core/vdma_clk
axi_hdmi_tx update for: ZedBoard, ZC706, ZC702, de10nano, ADRV9361-Z7035 (#897)
2022-03-29 13:51:21 +00:00
ad_connect axi_hdmi_core/reference_clk axi_hdmi_clkgen/clk_0
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_connect axi_hdmi_core/hdmi_out_clk hdmi_out_clk
ad_connect axi_hdmi_core/hdmi_24_hsync hdmi_hsync
ad_connect axi_hdmi_core/hdmi_24_vsync hdmi_vsync
ad_connect axi_hdmi_core/hdmi_24_data_e hdmi_data_e
ad_connect axi_hdmi_core/hdmi_24_data hdmi_data
common/zc706: Replace VDMA with ADI DMAC
2018-05-16 13:56:12 +00:00
zed, zc702, zc706, ccfmc: Send video trough axis interface
2018-09-17 17:12:12 +00:00
ad_connect axi_hdmi_dma/m_axis axi_hdmi_core/s_axis
common/zc706: Replace VDMA with ADI DMAC
2018-05-16 13:56:12 +00:00
ad_connect sys_cpu_resetn axi_hdmi_dma/s_axi_aresetn
ad_connect sys_cpu_resetn axi_hdmi_dma/m_src_axi_aresetn
ad_connect sys_cpu_clk axi_hdmi_dma/s_axi_aclk
ad_connect sys_cpu_clk axi_hdmi_dma/m_src_axi_aclk
ad_connect sys_cpu_clk axi_hdmi_dma/m_axis_aclk
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# spdif audio
ad_connect sys_cpu_clk axi_spdif_tx_core/DMA_REQ_ACLK
ad_connect sys_cpu_clk sys_ps7/DMA0_ACLK
ad_connect sys_cpu_resetn axi_spdif_tx_core/DMA_REQ_RSTN
ad_connect sys_ps7/DMA0_REQ axi_spdif_tx_core/DMA_REQ
ad_connect sys_ps7/DMA0_ACK axi_spdif_tx_core/DMA_ACK
ad_connect sys_200m_clk sys_audio_clkgen/clk_in1
projects/common: Cosmetic changes.
2015-08-25 06:58:32 +00:00
ad_connect sys_cpu_resetn sys_audio_clkgen/resetn
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_connect sys_audio_clkgen/clk_out1 axi_spdif_tx_core/spdif_data_clk
ad_connect spdif axi_spdif_tx_core/spdif_tx_o
system_id: deployed ip
2019-06-28 08:41:21 +00:00
# system id
ad_ip_instance axi_sysid axi_sysid_0
ad_ip_instance sysid_rom rom_sys_0
ad_connect axi_sysid_0/rom_addr rom_sys_0/rom_addr
ad_connect axi_sysid_0/sys_rom_data rom_sys_0/rom_data
ad_connect sys_cpu_clk rom_sys_0/clk
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# interrupts
ad_connect sys_concat_intc/dout sys_ps7/IRQ_F2P
common/zc706: Replace VDMA with ADI DMAC
2018-05-16 13:56:12 +00:00
ad_connect sys_concat_intc/In15 axi_hdmi_dma/irq
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_connect sys_concat_intc/In14 axi_iic_main/iic2intc_irpt
Remove interrupts from system_top for all xilinx projects - remove interrupts from system_top - for all suported carriers: - remove all interrupt bd pins - connect to GND all initial unconnected interrupt pins - update ad_cpu_interrupt procedure to disconnect a interrupt from GND before connectiong it to another pin.
2018-07-20 15:15:38 +00:00
ad_connect sys_concat_intc/In13 GND
ad_connect sys_concat_intc/In12 GND
ad_connect sys_concat_intc/In11 GND
ad_connect sys_concat_intc/In10 GND
ad_connect sys_concat_intc/In9 GND
ad_connect sys_concat_intc/In8 GND
ad_connect sys_concat_intc/In7 GND
ad_connect sys_concat_intc/In6 GND
ad_connect sys_concat_intc/In5 GND
ad_connect sys_concat_intc/In4 GND
ad_connect sys_concat_intc/In3 GND
ad_connect sys_concat_intc/In2 GND
ad_connect sys_concat_intc/In1 GND
ad_connect sys_concat_intc/In0 GND
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# interconnects
ad_cpu_interconnect 0x41600000 axi_iic_main
system_id: deployed ip
2019-06-28 08:41:21 +00:00
ad_cpu_interconnect 0x45000000 axi_sysid_0
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_cpu_interconnect 0x79000000 axi_hdmi_clkgen
ad_cpu_interconnect 0x43000000 axi_hdmi_dma
ad_cpu_interconnect 0x70e00000 axi_hdmi_core
ad_cpu_interconnect 0x75c00000 axi_spdif_tx_core
ad_mem_hp0_interconnect sys_cpu_clk sys_ps7/S_AXI_HP0
common/zc706: Replace VDMA with ADI DMAC
2018-05-16 13:56:12 +00:00
ad_mem_hp0_interconnect sys_cpu_clk axi_hdmi_dma/m_src_axi
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00