zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/daq2/common/daq2_bd.tcl

252 lines
13 KiB
Tcl
Raw Normal View History

daq2: rebase conflicts
2014-10-22 20:39:17 +00:00
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
# daq2
create_bd_port -dir I rx_ref_clk
create_bd_port -dir O rx_sync
create_bd_port -dir I rx_sysref
create_bd_port -dir I -from 3 -to 0 rx_data_p
create_bd_port -dir I -from 3 -to 0 rx_data_n
create_bd_port -dir I tx_ref_clk
create_bd_port -dir I tx_sync
create_bd_port -dir I tx_sysref
create_bd_port -dir O -from 3 -to 0 tx_data_p
create_bd_port -dir O -from 3 -to 0 tx_data_n
# dac peripherals
set axi_ad9144_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9144:1.0 axi_ad9144_core]
set_property -dict [list CONFIG.PCORE_QUAD_DUAL_N {0}] $axi_ad9144_core
set axi_ad9144_jesd [create_bd_cell -type ip -vlnv xilinx.com:ip:jesd204:6.0 axi_ad9144_jesd]
set_property -dict [list CONFIG.C_NODE_IS_TRANSMIT {1}] $axi_ad9144_jesd
set_property -dict [list CONFIG.C_LANES {4}] $axi_ad9144_jesd
set axi_ad9144_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9144_dma]
set_property -dict [list CONFIG.C_DMA_TYPE_SRC {0}] $axi_ad9144_dma
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
set_property -dict [list CONFIG.C_DMA_TYPE_DEST {1}] $axi_ad9144_dma
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
set_property -dict [list CONFIG.PCORE_ID {1}] $axi_ad9144_dma
set_property -dict [list CONFIG.C_AXI_SLICE_SRC {0}] $axi_ad9144_dma
set_property -dict [list CONFIG.C_AXI_SLICE_DEST {0}] $axi_ad9144_dma
set_property -dict [list CONFIG.C_CLKS_ASYNC_REQ_SRC {1}] $axi_ad9144_dma
set_property -dict [list CONFIG.C_DMA_LENGTH_WIDTH {24}] $axi_ad9144_dma
set_property -dict [list CONFIG.C_2D_TRANSFER {0}] $axi_ad9144_dma
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
set_property -dict [list CONFIG.C_CYCLIC {0}] $axi_ad9144_dma
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_SRC {128}] $axi_ad9144_dma
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_DEST {128}] $axi_ad9144_dma
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
set axi_ad9144_upack [create_bd_cell -type ip -vlnv analog.com:user:util_upack:1.0 axi_ad9144_upack]
set_property -dict [list CONFIG.CH_DW {64}] $axi_ad9144_upack
set_property -dict [list CONFIG.CH_CNT {2}] $axi_ad9144_upack
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
# adc peripherals
set axi_ad9680_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9680:1.0 axi_ad9680_core]
set axi_ad9680_jesd [create_bd_cell -type ip -vlnv xilinx.com:ip:jesd204:6.0 axi_ad9680_jesd]
set_property -dict [list CONFIG.C_NODE_IS_TRANSMIT {0}] $axi_ad9680_jesd
set_property -dict [list CONFIG.C_LANES {4}] $axi_ad9680_jesd
set axi_ad9680_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9680_dma]
set_property -dict [list CONFIG.C_DMA_TYPE_SRC {1}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_DMA_TYPE_DEST {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.PCORE_ID {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_AXI_SLICE_SRC {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_AXI_SLICE_DEST {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_CLKS_ASYNC_DEST_REQ {1}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_SYNC_TRANSFER_START {1}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_DMA_LENGTH_WIDTH {24}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_2D_TRANSFER {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_CYCLIC {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_SRC {64}] $axi_ad9680_dma
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_DEST {64}] $axi_ad9680_dma
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
set axi_ad9680_cpack [create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 axi_ad9680_cpack]
set_property -dict [list CONFIG.CH_DW {64}] $axi_ad9680_cpack
set_property -dict [list CONFIG.CH_CNT {2}] $axi_ad9680_cpack
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
# dac/adc common gt
set axi_daq2_gt [create_bd_cell -type ip -vlnv analog.com:user:axi_jesd_gt:1.0 axi_daq2_gt]
set_property -dict [list CONFIG.PCORE_NUM_OF_TX_LANES {4}] $axi_daq2_gt
set_property -dict [list CONFIG.PCORE_NUM_OF_RX_LANES {4}] $axi_daq2_gt
set_property -dict [list CONFIG.PCORE_TX_LANE_SEL_0 {0}] $axi_daq2_gt
set_property -dict [list CONFIG.PCORE_TX_LANE_SEL_1 {3}] $axi_daq2_gt
set_property -dict [list CONFIG.PCORE_TX_LANE_SEL_2 {1}] $axi_daq2_gt
set_property -dict [list CONFIG.PCORE_TX_LANE_SEL_3 {2}] $axi_daq2_gt
# connections (gt)
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect axi_daq2_gt/ref_clk_q rx_ref_clk
ad_connect axi_daq2_gt/ref_clk_c tx_ref_clk
ad_connect axi_daq2_gt/rx_data_p rx_data_p
ad_connect axi_daq2_gt/rx_data_n rx_data_n
ad_connect axi_daq2_gt/rx_sync rx_sync
ad_connect axi_daq2_gt/rx_ext_sysref rx_sysref
ad_connect axi_daq2_gt/tx_data_p tx_data_p
ad_connect axi_daq2_gt/tx_data_n tx_data_n
ad_connect axi_daq2_gt/tx_sync tx_sync
ad_connect axi_daq2_gt/tx_ext_sysref tx_sysref
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
# connections (dac)
ad_connect axi_daq2_gt/tx_clk_g axi_daq2_gt/tx_clk
ad_connect axi_daq2_gt/tx_clk_g axi_ad9144_core/tx_clk
ad_connect axi_daq2_gt/tx_clk_g axi_ad9144_jesd/tx_core_clk
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect axi_daq2_gt/tx_clk_g axi_ad9144_upack/dac_clk
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
ad_connect axi_daq2_gt/tx_rst axi_ad9144_jesd/tx_reset
ad_connect axi_daq2_gt/tx_sysref axi_ad9144_jesd/tx_sysref
create_bd_cell -type ip -vlnv analog.com:user:util_ccat:1.0 util_ccat_tx_gt_charisk
set_property -dict [list CONFIG.CH_DW {4}] [get_bd_cells util_ccat_tx_gt_charisk]
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_ccat_tx_gt_charisk]
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect util_ccat_tx_gt_charisk/ccat_data axi_daq2_gt/tx_gt_charisk
ad_connect util_ccat_tx_gt_charisk/data_0 axi_ad9144_jesd/gt0_txcharisk
ad_connect util_ccat_tx_gt_charisk/data_1 axi_ad9144_jesd/gt1_txcharisk
ad_connect util_ccat_tx_gt_charisk/data_2 axi_ad9144_jesd/gt2_txcharisk
ad_connect util_ccat_tx_gt_charisk/data_3 axi_ad9144_jesd/gt3_txcharisk
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
create_bd_cell -type ip -vlnv analog.com:user:util_ccat:1.0 util_ccat_tx_gt_data
set_property -dict [list CONFIG.CH_DW {32}] [get_bd_cells util_ccat_tx_gt_data]
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_ccat_tx_gt_data]
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect util_ccat_tx_gt_data/ccat_data axi_daq2_gt/tx_gt_data
ad_connect util_ccat_tx_gt_data/data_0 axi_ad9144_jesd/gt0_txdata
ad_connect util_ccat_tx_gt_data/data_1 axi_ad9144_jesd/gt1_txdata
ad_connect util_ccat_tx_gt_data/data_2 axi_ad9144_jesd/gt2_txdata
ad_connect util_ccat_tx_gt_data/data_3 axi_ad9144_jesd/gt3_txdata
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
ad_connect axi_daq2_gt/tx_rst_done axi_ad9144_jesd/tx_reset_done
ad_connect axi_daq2_gt/tx_ip_sync axi_ad9144_jesd/tx_sync
ad_connect axi_daq2_gt/tx_ip_sof axi_ad9144_jesd/tx_start_of_frame
ad_connect axi_daq2_gt/tx_ip_data axi_ad9144_jesd/tx_tdata
ad_connect axi_daq2_gt/tx_data axi_ad9144_core/tx_data
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect axi_ad9144_core/dac_valid_0 axi_ad9144_upack/dac_valid_0
ad_connect axi_ad9144_core/dac_enable_0 axi_ad9144_upack/dac_enable_0
ad_connect axi_ad9144_core/dac_ddata_0 axi_ad9144_upack/dac_data_0
ad_connect axi_ad9144_core/dac_valid_1 axi_ad9144_upack/dac_valid_1
ad_connect axi_ad9144_core/dac_enable_1 axi_ad9144_upack/dac_enable_1
ad_connect axi_ad9144_core/dac_ddata_1 axi_ad9144_upack/dac_data_1
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
ad_connect sys_cpu_resetn axi_ad9144_dma/m_src_axi_aresetn
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect sys_cpu_clk axi_ad9144_dma/m_axis_aclk
ad_connect axi_ad9144_dma/m_axis_xfer_req axi_ad9144_fifo/dma_xfer_req
ad_connect axi_ad9144_dma/m_axis_aclk axi_ad9144_fifo/dma_clk
daq2/common: axi_ad9144_fifo needs a proper reset sequence Connect the axi_ad9144_fifo/dma_rst signal to sys_cpu_reset
2015-06-12 11:03:46 +00:00
ad_connect sys_cpu_reset axi_ad9144_fifo/dma_rst
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect axi_ad9144_dma/m_axis_ready axi_ad9144_fifo/dma_ready
ad_connect axi_ad9144_dma/m_axis_data axi_ad9144_fifo/dma_data
ad_connect axi_ad9144_dma/m_axis_valid axi_ad9144_fifo/dma_valid
ad_connect axi_ad9144_dma/m_axis_last axi_ad9144_fifo/dma_xfer_last
ad_connect axi_ad9144_fifo/dac_clk axi_daq2_gt/tx_clk
ad_connect axi_ad9144_fifo/dac_valid axi_ad9144_upack/dac_valid
ad_connect axi_ad9144_fifo/dac_data axi_ad9144_upack/dac_data
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
# connections (adc)
ad_connect axi_daq2_gt/rx_clk_g axi_daq2_gt/rx_clk
ad_connect axi_daq2_gt/rx_clk_g axi_ad9680_core/rx_clk
ad_connect axi_daq2_gt/rx_clk_g axi_ad9680_jesd/rx_core_clk
ad6676evb, daq2, fmcadc2, fmcjesdadc1, usdrx1: Updated jesd reset connection
2015-04-30 09:11:46 +00:00
ad_connect axi_daq2_gt/rx_jesd_rst axi_ad9680_jesd/rx_reset
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect axi_daq2_gt/rx_clk_g axi_ad9680_cpack/adc_clk
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
ad_connect axi_daq2_gt/rx_sysref axi_ad9680_jesd/rx_sysref
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_charisk
set_property -dict [list CONFIG.CH_DW {4}] [get_bd_cells util_bsplit_rx_gt_charisk]
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_bsplit_rx_gt_charisk]
ad_connect util_bsplit_rx_gt_charisk/data axi_daq2_gt/rx_gt_charisk
ad_connect util_bsplit_rx_gt_charisk/split_data_0 axi_ad9680_jesd/gt0_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_1 axi_ad9680_jesd/gt1_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_2 axi_ad9680_jesd/gt2_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_3 axi_ad9680_jesd/gt3_rxcharisk
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_disperr
set_property -dict [list CONFIG.CH_DW {4}] [get_bd_cells util_bsplit_rx_gt_disperr]
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_bsplit_rx_gt_disperr]
ad_connect util_bsplit_rx_gt_disperr/data axi_daq2_gt/rx_gt_disperr
ad_connect util_bsplit_rx_gt_disperr/split_data_0 axi_ad9680_jesd/gt0_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_1 axi_ad9680_jesd/gt1_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_2 axi_ad9680_jesd/gt2_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_3 axi_ad9680_jesd/gt3_rxdisperr
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_notintable
set_property -dict [list CONFIG.CH_DW {4}] [get_bd_cells util_bsplit_rx_gt_notintable]
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_bsplit_rx_gt_notintable]
ad_connect util_bsplit_rx_gt_notintable/data axi_daq2_gt/rx_gt_notintable
ad_connect util_bsplit_rx_gt_notintable/split_data_0 axi_ad9680_jesd/gt0_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_1 axi_ad9680_jesd/gt1_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_2 axi_ad9680_jesd/gt2_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_3 axi_ad9680_jesd/gt3_rxnotintable
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_data
set_property -dict [list CONFIG.CH_DW {32}] [get_bd_cells util_bsplit_rx_gt_data]
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_bsplit_rx_gt_data]
ad_connect util_bsplit_rx_gt_data/data axi_daq2_gt/rx_gt_data
ad_connect util_bsplit_rx_gt_data/split_data_0 axi_ad9680_jesd/gt0_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_1 axi_ad9680_jesd/gt1_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_2 axi_ad9680_jesd/gt2_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_3 axi_ad9680_jesd/gt3_rxdata
ad_connect axi_daq2_gt/rx_rst_done axi_ad9680_jesd/rx_reset_done
ad_connect axi_daq2_gt/rx_ip_comma_align axi_ad9680_jesd/rxencommaalign_out
ad_connect axi_daq2_gt/rx_ip_sync axi_ad9680_jesd/rx_sync
ad_connect axi_daq2_gt/rx_ip_sof axi_ad9680_jesd/rx_start_of_frame
ad_connect axi_daq2_gt/rx_ip_data axi_ad9680_jesd/rx_tdata
ad_connect axi_daq2_gt/rx_data axi_ad9680_core/rx_data
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect axi_ad9680_core/adc_enable_0 axi_ad9680_cpack/adc_enable_0
ad_connect axi_ad9680_core/adc_valid_0 axi_ad9680_cpack/adc_valid_0
ad_connect axi_ad9680_core/adc_data_0 axi_ad9680_cpack/adc_data_0
ad_connect axi_ad9680_core/adc_enable_1 axi_ad9680_cpack/adc_enable_1
ad_connect axi_ad9680_core/adc_valid_1 axi_ad9680_cpack/adc_valid_1
ad_connect axi_ad9680_core/adc_data_1 axi_ad9680_cpack/adc_data_1
ad_connect axi_daq2_gt/rx_rst axi_ad9680_fifo/adc_rst
ad_connect axi_daq2_gt/rx_rst axi_ad9680_cpack/adc_rst
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
ad_connect axi_ad9680_core/adc_clk axi_ad9680_fifo/adc_clk
ad_connect axi_ad9680_core/adc_dovf axi_ad9680_fifo/adc_wovf
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_connect axi_ad9680_cpack/adc_valid axi_ad9680_fifo/adc_wr
ad_connect axi_ad9680_cpack/adc_data axi_ad9680_fifo/adc_wdata
ad_connect sys_cpu_clk axi_ad9680_fifo/dma_clk
daq2: move gpio/spi to base design
2015-03-09 20:08:25 +00:00
ad_connect sys_cpu_clk axi_ad9680_dma/s_axis_aclk
ad_connect sys_cpu_resetn axi_ad9680_dma/m_dest_axi_aresetn
ad_connect axi_ad9680_fifo/dma_wr axi_ad9680_dma/s_axis_valid
ad_connect axi_ad9680_fifo/dma_wdata axi_ad9680_dma/s_axis_data
ad_connect axi_ad9680_fifo/dma_wready axi_ad9680_dma/s_axis_ready
ad_connect axi_ad9680_fifo/dma_xfer_req axi_ad9680_dma/s_axis_xfer_req
# interconnect (cpu)
ad_cpu_interconnect 0x44A60000 axi_daq2_gt
ad_cpu_interconnect 0x44A00000 axi_ad9144_core
ad_cpu_interconnect 0x44A90000 axi_ad9144_jesd
ad_cpu_interconnect 0x7c420000 axi_ad9144_dma
ad_cpu_interconnect 0x44A10000 axi_ad9680_core
ad_cpu_interconnect 0x44A91000 axi_ad9680_jesd
ad_cpu_interconnect 0x7c400000 axi_ad9680_dma
# gt uses hp3, and 100MHz clock for both DRP and AXI4
ad_mem_hp3_interconnect sys_cpu_clk sys_ps7/S_AXI_HP3
ad_mem_hp3_interconnect sys_cpu_clk axi_daq2_gt/m_axi
# interconnect (mem/dac)
ad_mem_hp1_interconnect sys_cpu_clk sys_ps7/S_AXI_HP1
ad_mem_hp1_interconnect sys_cpu_clk axi_ad9144_dma/m_src_axi
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_cpu_clk axi_ad9680_dma/m_dest_axi
daq2: rebase conflicts
2014-10-22 20:39:17 +00:00
daq2: move intrs into ipi
2015-03-12 20:16:55 +00:00
# interrupts
daq2: rebase conflicts
2014-10-22 20:39:17 +00:00
daq2 : Integrate the DACFIFO into the supported projects. + All pack/unpack logic is made by the cpack and upack modules. + The DAC FIFO is integrated between the TX DMA and cpack. + All the top files are updated, all the projects compiled successfully.
2015-05-11 09:17:59 +00:00
ad_cpu_interrupt ps-12 mb-13 axi_ad9144_dma/irq
ad_cpu_interrupt ps-13 mb-12 axi_ad9680_dma/irq
daq2: rebase conflicts
2014-10-22 20:39:17 +00:00
daq2/zc706: open ports
2015-06-10 18:25:58 +00:00
ad_connect axi_ad9144_core/dac_ddata_2 GND
ad_connect axi_ad9144_core/dac_ddata_3 GND