zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/fmcomms2/common/fmcomms2_bd.tcl

221 lines
9.2 KiB
Tcl
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# fmcomms2
create_bd_port -dir I rx_clk_in_p
create_bd_port -dir I rx_clk_in_n
create_bd_port -dir I rx_frame_in_p
create_bd_port -dir I rx_frame_in_n
create_bd_port -dir I -from 5 -to 0 rx_data_in_p
create_bd_port -dir I -from 5 -to 0 rx_data_in_n
create_bd_port -dir O tx_clk_out_p
create_bd_port -dir O tx_clk_out_n
create_bd_port -dir O tx_frame_out_p
create_bd_port -dir O tx_frame_out_n
create_bd_port -dir O -from 5 -to 0 tx_data_out_p
create_bd_port -dir O -from 5 -to 0 tx_data_out_n
create_bd_port -dir O enable
create_bd_port -dir O txnrx
fmcomm2- enable/txnrx- through devif
2015-08-27 15:41:16 +00:00
create_bd_port -dir I up_enable
create_bd_port -dir I up_txnrx
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
fmcomms2_zc706: Update project with the new TDD sync interface
2015-09-09 09:35:22 +00:00
create_bd_port -dir O tdd_sync_o
create_bd_port -dir I tdd_sync_i
create_bd_port -dir O tdd_sync_t
fmcomms2: Add a synchronization interface for TDD mode. Supported carrier are ZC706 and RFSOM. The synchronization pulse is automatically generated by the master terminal, when TDD mode is enabled. By default a terminal is slave, software must write 0x01 into TDD register 0x50.
2015-07-28 11:41:32 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# ad9361 core
fmcomms2: Update IP instantiations
2017-04-21 12:09:37 +00:00
ad_ip_instance axi_ad9361 axi_ad9361
ad_ip_parameter axi_ad9361 CONFIG.ID 0
fmcomms2/common: Use DDS cordic on 14 bit atan LUT
2018-02-07 13:16:39 +00:00
# set to 1 for CORDIC or 2 for POLYNOMIAL
ad_ip_parameter axi_ad9361 CONFIG.DAC_DDS_TYPE 1
ad_ip_parameter axi_ad9361 CONFIG.DAC_DDS_CORDIC_DW 14
fmcomms2: Added FIFOs for DAC and ADC paths so that the path works at l_clk / 2 or l_clk /4 - removed ILA
2017-01-11 16:12:35 +00:00
ad_connect sys_200m_clk axi_ad9361/delay_clk
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_connect axi_ad9361/l_clk axi_ad9361/clk
fmcomms2: Added FIFOs for DAC and ADC paths so that the path works at l_clk / 2 or l_clk /4 - removed ILA
2017-01-11 16:12:35 +00:00
ad_connect rx_clk_in_p axi_ad9361/rx_clk_in_p
ad_connect rx_clk_in_n axi_ad9361/rx_clk_in_n
ad_connect rx_frame_in_p axi_ad9361/rx_frame_in_p
ad_connect rx_frame_in_n axi_ad9361/rx_frame_in_n
ad_connect rx_data_in_p axi_ad9361/rx_data_in_p
ad_connect rx_data_in_n axi_ad9361/rx_data_in_n
ad_connect tx_clk_out_p axi_ad9361/tx_clk_out_p
ad_connect tx_clk_out_n axi_ad9361/tx_clk_out_n
ad_connect tx_frame_out_p axi_ad9361/tx_frame_out_p
ad_connect tx_frame_out_n axi_ad9361/tx_frame_out_n
ad_connect tx_data_out_p axi_ad9361/tx_data_out_p
ad_connect tx_data_out_n axi_ad9361/tx_data_out_n
ad_connect enable axi_ad9361/enable
ad_connect txnrx axi_ad9361/txnrx
ad_connect up_enable axi_ad9361/up_enable
ad_connect up_txnrx axi_ad9361/up_txnrx
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
# tdd-sync
ad_ip_instance util_tdd_sync util_ad9361_tdd_sync
ad_ip_parameter util_ad9361_tdd_sync CONFIG.TDD_SYNC_PERIOD 10000000
ad_connect sys_cpu_clk util_ad9361_tdd_sync/clk
ad_connect sys_cpu_resetn util_ad9361_tdd_sync/rstn
ad_connect util_ad9361_tdd_sync/sync_out axi_ad9361/tdd_sync
ad_connect util_ad9361_tdd_sync/sync_mode axi_ad9361/tdd_sync_cntr
ad_connect tdd_sync_t axi_ad9361/tdd_sync_cntr
ad_connect tdd_sync_o util_ad9361_tdd_sync/sync_out
ad_connect tdd_sync_i util_ad9361_tdd_sync/sync_in
# interface clock divider to generate sampling clock
# interface runs at 4x in 2r2t mode, and 2x in 1r1t mode
ad_ip_instance xlconcat util_ad9361_divclk_sel_concat
ad_ip_parameter util_ad9361_divclk_sel_concat CONFIG.NUM_PORTS 2
ad_connect axi_ad9361/adc_r1_mode util_ad9361_divclk_sel_concat/In0
ad_connect axi_ad9361/dac_r1_mode util_ad9361_divclk_sel_concat/In1
ad_ip_instance util_reduced_logic util_ad9361_divclk_sel
ad_ip_parameter util_ad9361_divclk_sel CONFIG.C_SIZE 2
ad_connect util_ad9361_divclk_sel_concat/dout util_ad9361_divclk_sel/Op1
ad_ip_instance util_clkdiv util_ad9361_divclk
adrv936x, fmcomms2/5, usrpe31x: Fix warning on the dac path Fix warnining regarding SYNC_TRANSFER_START parameter which doesn't apply when the axi_dmac is configured for the tx path.
2018-08-16 13:31:22 +00:00
ad_connect util_ad9361_divclk_sel/Res util_ad9361_divclk/clk_sel
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_connect axi_ad9361/l_clk util_ad9361_divclk/clk
# resets at divided clock
ad_ip_instance proc_sys_reset util_ad9361_divclk_reset
adrv936x, fmcomms2/5, usrpe31x: Fix warning on the dac path Fix warnining regarding SYNC_TRANSFER_START parameter which doesn't apply when the axi_dmac is configured for the tx path.
2018-08-16 13:31:22 +00:00
ad_connect sys_rstgen/peripheral_aresetn util_ad9361_divclk_reset/ext_reset_in
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_connect util_ad9361_divclk/clk_out util_ad9361_divclk_reset/slowest_sync_clk
# adc-path wfifo
ad_ip_instance util_wfifo util_ad9361_adc_fifo
ad_ip_parameter util_ad9361_adc_fifo CONFIG.NUM_OF_CHANNELS 4
ad_ip_parameter util_ad9361_adc_fifo CONFIG.DIN_ADDRESS_WIDTH 4
ad_ip_parameter util_ad9361_adc_fifo CONFIG.DIN_DATA_WIDTH 16
ad_ip_parameter util_ad9361_adc_fifo CONFIG.DOUT_DATA_WIDTH 16
ad_connect axi_ad9361/l_clk util_ad9361_adc_fifo/din_clk
fmcomms2: Added FIFOs for DAC and ADC paths so that the path works at l_clk / 2 or l_clk /4 - removed ILA
2017-01-11 16:12:35 +00:00
ad_connect axi_ad9361/rst util_ad9361_adc_fifo/din_rst
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_connect util_ad9361_divclk/clk_out util_ad9361_adc_fifo/dout_clk
ad_connect util_ad9361_divclk_reset/peripheral_aresetn util_ad9361_adc_fifo/dout_rstn
fmcomms2: Added FIFOs for DAC and ADC paths so that the path works at l_clk / 2 or l_clk /4 - removed ILA
2017-01-11 16:12:35 +00:00
ad_connect axi_ad9361/adc_enable_i0 util_ad9361_adc_fifo/din_enable_0
ad_connect axi_ad9361/adc_valid_i0 util_ad9361_adc_fifo/din_valid_0
ad_connect axi_ad9361/adc_data_i0 util_ad9361_adc_fifo/din_data_0
ad_connect axi_ad9361/adc_enable_q0 util_ad9361_adc_fifo/din_enable_1
ad_connect axi_ad9361/adc_valid_q0 util_ad9361_adc_fifo/din_valid_1
ad_connect axi_ad9361/adc_data_q0 util_ad9361_adc_fifo/din_data_1
ad_connect axi_ad9361/adc_enable_i1 util_ad9361_adc_fifo/din_enable_2
ad_connect axi_ad9361/adc_valid_i1 util_ad9361_adc_fifo/din_valid_2
ad_connect axi_ad9361/adc_data_i1 util_ad9361_adc_fifo/din_data_2
ad_connect axi_ad9361/adc_enable_q1 util_ad9361_adc_fifo/din_enable_3
ad_connect axi_ad9361/adc_valid_q1 util_ad9361_adc_fifo/din_valid_3
ad_connect axi_ad9361/adc_data_q1 util_ad9361_adc_fifo/din_data_3
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_connect util_ad9361_adc_fifo/din_ovf axi_ad9361/adc_dovf
# adc-path channel pack
fmcomms2: Use new pack/unpack infrastructure Use the new util_cpack2 and util_upack2 cores. They have lower utilization that the old util_cpack and util_upack cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-12-06 11:28:32 +00:00
ad_ip_instance util_cpack2 util_ad9361_adc_pack { \
NUM_OF_CHANNELS 4 \
SAMPLE_DATA_WIDTH 16 \
}
ad_connect util_ad9361_divclk/clk_out util_ad9361_adc_pack/clk
ad_connect util_ad9361_divclk_reset/peripheral_reset util_ad9361_adc_pack/reset
ad_connect util_ad9361_adc_fifo/dout_valid_0 util_ad9361_adc_pack/fifo_wr_en
ad_connect util_ad9361_adc_pack/fifo_wr_overflow util_ad9361_adc_fifo/dout_ovf
for {set i 0} {$i < 4} {incr i} {
ad_connect util_ad9361_adc_fifo/dout_enable_$i util_ad9361_adc_pack/enable_$i
ad_connect util_ad9361_adc_fifo/dout_data_$i util_ad9361_adc_pack/fifo_wr_data_$i
}
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
# adc-path dma
ad_ip_instance axi_dmac axi_ad9361_adc_dma
ad_ip_parameter axi_ad9361_adc_dma CONFIG.DMA_TYPE_SRC 2
ad_ip_parameter axi_ad9361_adc_dma CONFIG.DMA_TYPE_DEST 0
ad_ip_parameter axi_ad9361_adc_dma CONFIG.CYCLIC 0
ad_ip_parameter axi_ad9361_adc_dma CONFIG.SYNC_TRANSFER_START 1
ad_ip_parameter axi_ad9361_adc_dma CONFIG.AXI_SLICE_SRC 0
ad_ip_parameter axi_ad9361_adc_dma CONFIG.AXI_SLICE_DEST 0
ad_ip_parameter axi_ad9361_adc_dma CONFIG.DMA_2D_TRANSFER 0
ad_ip_parameter axi_ad9361_adc_dma CONFIG.DMA_DATA_WIDTH_SRC 64
fmcomms2: Use new pack/unpack infrastructure Use the new util_cpack2 and util_upack2 cores. They have lower utilization that the old util_cpack and util_upack cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-12-06 11:28:32 +00:00
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_connect util_ad9361_divclk/clk_out axi_ad9361_adc_dma/fifo_wr_clk
fmcomms2: Use new pack/unpack infrastructure Use the new util_cpack2 and util_upack2 cores. They have lower utilization that the old util_cpack and util_upack cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-12-06 11:28:32 +00:00
ad_connect util_ad9361_adc_pack/packed_fifo_wr axi_ad9361_adc_dma/fifo_wr
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_connect sys_cpu_resetn axi_ad9361_adc_dma/m_dest_axi_aresetn
# dac-path rfifo
ad_ip_instance util_rfifo axi_ad9361_dac_fifo
ad_ip_parameter axi_ad9361_dac_fifo CONFIG.DIN_DATA_WIDTH 16
ad_ip_parameter axi_ad9361_dac_fifo CONFIG.DOUT_DATA_WIDTH 16
ad_ip_parameter axi_ad9361_dac_fifo CONFIG.DIN_ADDRESS_WIDTH 4
ad_connect axi_ad9361/l_clk axi_ad9361_dac_fifo/dout_clk
ad_connect axi_ad9361/rst axi_ad9361_dac_fifo/dout_rst
ad_connect util_ad9361_divclk/clk_out axi_ad9361_dac_fifo/din_clk
ad_connect util_ad9361_divclk_reset/peripheral_aresetn axi_ad9361_dac_fifo/din_rstn
ad_connect axi_ad9361_dac_fifo/dout_enable_0 axi_ad9361/dac_enable_i0
ad_connect axi_ad9361_dac_fifo/dout_valid_0 axi_ad9361/dac_valid_i0
ad_connect axi_ad9361_dac_fifo/dout_data_0 axi_ad9361/dac_data_i0
ad_connect axi_ad9361_dac_fifo/dout_enable_1 axi_ad9361/dac_enable_q0
ad_connect axi_ad9361_dac_fifo/dout_valid_1 axi_ad9361/dac_valid_q0
ad_connect axi_ad9361_dac_fifo/dout_data_1 axi_ad9361/dac_data_q0
ad_connect axi_ad9361_dac_fifo/dout_enable_2 axi_ad9361/dac_enable_i1
ad_connect axi_ad9361_dac_fifo/dout_valid_2 axi_ad9361/dac_valid_i1
ad_connect axi_ad9361_dac_fifo/dout_data_2 axi_ad9361/dac_data_i1
ad_connect axi_ad9361_dac_fifo/dout_enable_3 axi_ad9361/dac_enable_q1
ad_connect axi_ad9361_dac_fifo/dout_valid_3 axi_ad9361/dac_valid_q1
ad_connect axi_ad9361_dac_fifo/dout_data_3 axi_ad9361/dac_data_q1
ad_connect axi_ad9361_dac_fifo/dout_unf axi_ad9361/dac_dunf
# dac-path channel unpack
fmcomms2: Use new pack/unpack infrastructure Use the new util_cpack2 and util_upack2 cores. They have lower utilization that the old util_cpack and util_upack cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-12-06 11:28:32 +00:00
ad_ip_instance util_upack2 util_ad9361_dac_upack { \
NUM_OF_CHANNELS 4 \
SAMPLE_DATA_WIDTH 16 \
}
ad_connect util_ad9361_divclk/clk_out util_ad9361_dac_upack/clk
ad_connect util_ad9361_divclk_reset/peripheral_reset util_ad9361_dac_upack/reset
ad_connect util_ad9361_dac_upack/fifo_rd_en axi_ad9361_dac_fifo/din_valid_0
ad_connect util_ad9361_dac_upack/fifo_rd_underflow axi_ad9361_dac_fifo/din_unf
for {set i 0} {$i < 4} {incr i} {
ad_connect util_ad9361_dac_upack/enable_$i axi_ad9361_dac_fifo/din_enable_$i
ad_connect util_ad9361_dac_upack/fifo_rd_valid axi_ad9361_dac_fifo/din_valid_in_$i
ad_connect util_ad9361_dac_upack/fifo_rd_data_$i axi_ad9361_dac_fifo/din_data_$i
}
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
# dac-path dma
ad_ip_instance axi_dmac axi_ad9361_dac_dma
ad_ip_parameter axi_ad9361_dac_dma CONFIG.DMA_TYPE_SRC 0
fmcomms2: Use new pack/unpack infrastructure Use the new util_cpack2 and util_upack2 cores. They have lower utilization that the old util_cpack and util_upack cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-12-06 11:28:32 +00:00
ad_ip_parameter axi_ad9361_dac_dma CONFIG.DMA_TYPE_DEST 1
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_ip_parameter axi_ad9361_dac_dma CONFIG.CYCLIC 1
ad_ip_parameter axi_ad9361_dac_dma CONFIG.AXI_SLICE_SRC 0
fmcomms2: Use new pack/unpack infrastructure Use the new util_cpack2 and util_upack2 cores. They have lower utilization that the old util_cpack and util_upack cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-12-06 11:28:32 +00:00
ad_ip_parameter axi_ad9361_dac_dma CONFIG.AXI_SLICE_DEST 0
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_ip_parameter axi_ad9361_dac_dma CONFIG.DMA_2D_TRANSFER 0
ad_ip_parameter axi_ad9361_dac_dma CONFIG.DMA_DATA_WIDTH_DEST 64
fmcomms2: Use new pack/unpack infrastructure Use the new util_cpack2 and util_upack2 cores. They have lower utilization that the old util_cpack and util_upack cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-12-06 11:28:32 +00:00
ad_connect util_ad9361_divclk/clk_out axi_ad9361_dac_dma/m_axis_aclk
ad_connect axi_ad9361_dac_dma/m_axis util_ad9361_dac_upack/s_axis
fmcomms2_bd- keep data flow format
2017-08-03 17:41:16 +00:00
ad_connect sys_cpu_resetn axi_ad9361_dac_dma/m_src_axi_aresetn
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# interconnects
ad_cpu_interconnect 0x79020000 axi_ad9361
ad_cpu_interconnect 0x7C400000 axi_ad9361_adc_dma
ad_cpu_interconnect 0x7C420000 axi_ad9361_dac_dma
ad_mem_hp1_interconnect sys_cpu_clk sys_ps7/S_AXI_HP1
ad_mem_hp1_interconnect sys_cpu_clk axi_ad9361_adc_dma/m_dest_axi
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_cpu_clk axi_ad9361_dac_dma/m_src_axi
# interrupts
ad_cpu_interrupt ps-13 mb-12 axi_ad9361_adc_dma/irq
ad_cpu_interrupt ps-12 mb-13 axi_ad9361_dac_dma/irq