pluto_hdl_adi/library/axi_ltc235x/axi_ltc235x.v

513 lines
16 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2023 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_ltc235x #(
parameter ID = 0,
parameter XILINX_INTEL_N = 0,
parameter FPGA_TECHNOLOGY = 0,
parameter FPGA_FAMILY = 0,
parameter SPEED_GRADE = 0,
parameter DEV_PACKAGE = 0,
parameter [0:0] LVDS_CMOS_N = 0,
parameter LANE_0_ENABLE = 1,
parameter LANE_1_ENABLE = 1,
parameter LANE_2_ENABLE = 1,
parameter LANE_3_ENABLE = 1,
parameter LANE_4_ENABLE = 1,
parameter LANE_5_ENABLE = 1,
parameter LANE_6_ENABLE = 1,
parameter LANE_7_ENABLE = 1,
parameter EXTERNAL_CLK = 0,
parameter LTC235X_FAMILY = 0,
parameter NUM_CHANNELS = 8,
parameter DATA_WIDTH = 18
) (
// physical data interface
input external_clk,
// common
input busy,
output lvds_cmos_n,
// cmos
output sdi,
output scki,
input scko,
input [ 7:0] sdo,
// lvds
output sdi_p,
output sdi_n,
output scki_p,
output scki_n,
input scko_p,
input scko_n,
input sdo_p,
input sdo_n,
// AXI Slave Memory Map
input s_axi_aclk,
input s_axi_aresetn,
input s_axi_awvalid,
input [15:0] s_axi_awaddr,
input [ 2:0] s_axi_awprot,
output s_axi_awready,
input s_axi_wvalid,
input [31:0] s_axi_wdata,
input [ 3:0] s_axi_wstrb,
output s_axi_wready,
output s_axi_bvalid,
output [ 1:0] s_axi_bresp,
input s_axi_bready,
input s_axi_arvalid,
input [15:0] s_axi_araddr,
input [ 2:0] s_axi_arprot,
output s_axi_arready,
output s_axi_rvalid,
output [ 1:0] s_axi_rresp,
output [31:0] s_axi_rdata,
input s_axi_rready,
// Write FIFO interface
input adc_dovf,
output adc_valid_0,
output adc_valid_1,
output adc_valid_2,
output adc_valid_3,
output adc_valid_4,
output adc_valid_5,
output adc_valid_6,
output adc_valid_7,
output adc_enable_0,
output adc_enable_1,
output adc_enable_2,
output adc_enable_3,
output adc_enable_4,
output adc_enable_5,
output adc_enable_6,
output adc_enable_7,
output [31:0] adc_data_0,
output [31:0] adc_data_1,
output [31:0] adc_data_2,
output [31:0] adc_data_3,
output [31:0] adc_data_4,
output [31:0] adc_data_5,
output [31:0] adc_data_6,
output [31:0] adc_data_7
);
// localparam
localparam [ 7:0] ACTIVE_LANES = {
LANE_7_ENABLE == 1 ? 1'b1 : 1'b0,
LANE_6_ENABLE == 1 ? 1'b1 : 1'b0,
LANE_5_ENABLE == 1 ? 1'b1 : 1'b0,
LANE_4_ENABLE == 1 ? 1'b1 : 1'b0,
LANE_3_ENABLE == 1 ? 1'b1 : 1'b0,
LANE_2_ENABLE == 1 ? 1'b1 : 1'b0,
LANE_1_ENABLE == 1 ? 1'b1 : 1'b0,
LANE_0_ENABLE == 1 ? 1'b1 : 1'b0};
localparam [ 0:0] RD_RAW_DATA = 1'b1;
localparam [ 0:0] CMOS_OR_LVDS_N = ~LVDS_CMOS_N[0];
localparam [31:0] CONFIG = {18'd0, RD_RAW_DATA, 5'b0, CMOS_OR_LVDS_N, 7'b0}; // truncated value with size 45 to match size of target (32)
// internal registers
reg up_wack = 1'b0;
reg up_rack = 1'b0;
reg [31:0] up_rdata = 32'b0;
// internal signals
wire [23:0] softspan_24;
wire [ 2:0] softspan_3[0:7];
wire adc_valid;
wire up_clk;
wire up_rstn;
wire up_rreq_s;
wire [13:0] up_raddr_s;
wire up_wreq_s;
wire [13:0] up_waddr_s;
wire adc_clk_s;
wire [13:0] up_addr_s;
wire [31:0] up_wdata_s;
wire [31:0] up_rdata_s[0:8];
wire [ 8:0] up_rack_s;
wire [ 8:0] up_wack_s;
// read raw, feature
wire rd_req_s;
wire wr_req_s;
wire [15:0] wr_data_s;
wire [15:0] rd_data_s;
wire rd_valid_s;
wire adc_rst_s;
wire [ 7:0] adc_enable;
wire [ 2:0] adc_status_header[0:7];
wire [31:0] adc_data[0:7];
// defaults
assign up_clk = s_axi_aclk;
assign up_rstn = s_axi_aresetn;
assign lvds_cmos_n = LVDS_CMOS_N[0];
assign adc_valid_0 = adc_valid;
assign adc_valid_1 = adc_valid;
assign adc_valid_2 = adc_valid;
assign adc_valid_3 = adc_valid;
assign adc_valid_4 = adc_valid;
assign adc_valid_5 = adc_valid;
assign adc_valid_6 = adc_valid;
assign adc_valid_7 = adc_valid;
assign adc_enable_0 = adc_enable[0];
assign adc_enable_1 = adc_enable[1];
assign adc_enable_2 = adc_enable[2];
assign adc_enable_3 = adc_enable[3];
assign adc_enable_4 = adc_enable[4];
assign adc_enable_5 = adc_enable[5];
assign adc_enable_6 = adc_enable[6];
assign adc_enable_7 = adc_enable[7];
assign adc_data_0 = adc_data[0];
assign adc_data_1 = adc_data[1];
assign adc_data_2 = adc_data[2];
assign adc_data_3 = adc_data[3];
assign adc_data_4 = adc_data[4];
assign adc_data_5 = adc_data[5];
assign adc_data_6 = adc_data[6];
assign adc_data_7 = adc_data[7];
generate
if (NUM_CHANNELS == 8) begin
assign softspan_24 = {softspan_3[7], softspan_3[6], softspan_3[5], softspan_3[4], softspan_3[3], softspan_3[2], softspan_3[1], softspan_3[0]};
end else if (NUM_CHANNELS == 4) begin
assign softspan_24 = {softspan_3[3], softspan_3[2], softspan_3[1], softspan_3[0], 12'b0};
end else begin
assign softspan_24 = {softspan_3[1], softspan_3[0], 18'b0};
end
endgenerate
// processor read/write interface
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_wack <= 'd0;
up_rack <= 'd0;
up_rdata <= 'd0;
end else begin
up_wack <= |up_wack_s;
up_rack <= |up_rack_s;
up_rdata <= up_rdata_s[0] |
up_rdata_s[1] |
up_rdata_s[2] |
up_rdata_s[3] |
up_rdata_s[4] |
up_rdata_s[5] |
up_rdata_s[6] |
up_rdata_s[7] |
up_rdata_s[8];
end
end
// CMOS/LVDS INTERFACE
generate
if (EXTERNAL_CLK == 1'b1) begin
assign adc_clk_s = external_clk;
end else begin
assign adc_clk_s = up_clk;
end
if (LVDS_CMOS_N == 1) begin
axi_ltc235x_lvds #(
.XILINX_INTEL_N (XILINX_INTEL_N),
.LTC235X_FAMILY (LTC235X_FAMILY),
.NUM_CHANNELS (NUM_CHANNELS),
.DATA_WIDTH (DATA_WIDTH)
) i_ltc235x_lvds (
.rst (adc_rst_s),
.clk (adc_clk_s),
.adc_enable (adc_enable),
.softspan_next (softspan_24),
.scki_p (scki_p),
.scki_n (scki_n),
.sdi_p (sdi_p),
.sdi_n (sdi_n),
.scko_p (scko_p),
.scko_n (scko_n),
.sdo_p (sdo_p),
.sdo_n (sdo_n),
.busy (busy),
.adc_ch0_id (adc_status_header[0]),
.adc_ch1_id (adc_status_header[1]),
.adc_ch2_id (adc_status_header[2]),
.adc_ch3_id (adc_status_header[3]),
.adc_ch4_id (adc_status_header[4]),
.adc_ch5_id (adc_status_header[5]),
.adc_ch6_id (adc_status_header[6]),
.adc_ch7_id (adc_status_header[7]),
.adc_data_0 (adc_data_0),
.adc_data_1 (adc_data_1),
.adc_data_2 (adc_data_2),
.adc_data_3 (adc_data_3),
.adc_data_4 (adc_data_4),
.adc_data_5 (adc_data_5),
.adc_data_6 (adc_data_6),
.adc_data_7 (adc_data_7),
.adc_softspan_0 (),
.adc_softspan_1 (),
.adc_softspan_2 (),
.adc_softspan_3 (),
.adc_softspan_4 (),
.adc_softspan_5 (),
.adc_softspan_6 (),
.adc_softspan_7 (),
.adc_valid (adc_valid));
end else begin
axi_ltc235x_cmos #(
.LTC235X_FAMILY (LTC235X_FAMILY),
.ACTIVE_LANES (ACTIVE_LANES),
.NUM_CHANNELS (NUM_CHANNELS),
.DATA_WIDTH (DATA_WIDTH)
) i_ltc235x_cmos (
.rst (adc_rst_s),
.clk (adc_clk_s),
.adc_enable (adc_enable),
.softspan_next (softspan_24),
.scki (scki),
.sdi (sdi),
.scko (scko),
.sdo (sdo),
.busy (busy),
.adc_ch0_id (adc_status_header[0]),
.adc_ch1_id (adc_status_header[1]),
.adc_ch2_id (adc_status_header[2]),
.adc_ch3_id (adc_status_header[3]),
.adc_ch4_id (adc_status_header[4]),
.adc_ch5_id (adc_status_header[5]),
.adc_ch6_id (adc_status_header[6]),
.adc_ch7_id (adc_status_header[7]),
.adc_data_0 (adc_data_0),
.adc_data_1 (adc_data_1),
.adc_data_2 (adc_data_2),
.adc_data_3 (adc_data_3),
.adc_data_4 (adc_data_4),
.adc_data_5 (adc_data_5),
.adc_data_6 (adc_data_6),
.adc_data_7 (adc_data_7),
.adc_softspan_0 (),
.adc_softspan_1 (),
.adc_softspan_2 (),
.adc_softspan_3 (),
.adc_softspan_4 (),
.adc_softspan_5 (),
.adc_softspan_6 (),
.adc_softspan_7 (),
.adc_valid (adc_valid));
end
endgenerate
// regmap adc channels
generate
genvar i;
for (i = 0; i < NUM_CHANNELS; i=i+1) begin : regmap_channels
up_adc_channel #(
.CHANNEL_ID(i)
) i_up_adc_channel (
.adc_clk (adc_clk_s),
.adc_rst (adc_rst_s),
.adc_enable (adc_enable[i]),
.adc_iqcor_enb (),
.adc_dcfilt_enb (),
.adc_dfmt_se (),
.adc_dfmt_type (),
.adc_dfmt_enable (),
.adc_dcfilt_offset (),
.adc_dcfilt_coeff (),
.adc_iqcor_coeff_1 (),
.adc_iqcor_coeff_2 (),
.adc_pnseq_sel (),
.adc_data_sel (),
.adc_pn_err (1'b0),
.adc_pn_oos (1'b0),
.adc_or (1'b0),
.adc_read_data (adc_data[i]),
.adc_status_header({5'd0, adc_status_header[i]}),
.adc_crc_err(1'b0),
.adc_softspan (softspan_3[i]),
.up_adc_crc_err (),
.up_adc_pn_err (),
.up_adc_pn_oos (),
.up_adc_or (),
.up_usr_datatype_be (),
.up_usr_datatype_signed (),
.up_usr_datatype_shift (),
.up_usr_datatype_total_bits (),
.up_usr_datatype_bits (),
.up_usr_decimation_m (),
.up_usr_decimation_n (),
.adc_usr_datatype_be (1'b0),
.adc_usr_datatype_signed (1'b1),
.adc_usr_datatype_shift (8'd0),
.adc_usr_datatype_total_bits (8'd32),
.adc_usr_datatype_bits (8'd32),
.adc_usr_decimation_m (16'd1),
.adc_usr_decimation_n (16'd1),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s[i]),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s[i]),
.up_rack (up_rack_s[i]));
end
endgenerate
// up adc common
up_adc_common #(
.ID(ID),
.CONFIG(CONFIG)
) i_up_adc_common (
.mmcm_rst (),
.adc_clk (adc_clk_s),
.adc_rst (adc_rst_s),
.adc_r1_mode (),
.adc_ddr_edgesel (),
.adc_pin_mode (),
.adc_status ('h1),
.adc_sync_status (1'b1),
.adc_status_ovf (adc_dovf),
.adc_clk_ratio (32'd1),
.adc_start_code (),
.adc_sref_sync (),
.adc_sync (),
.adc_ext_sync_arm(),
.adc_ext_sync_disarm(),
.adc_ext_sync_manual_req(),
.adc_num_lanes(),
.adc_custom_control(),
.adc_crc_enable(),
.adc_sdr_ddr_n(),
.adc_symb_op(),
.adc_symb_8_16b(),
.up_pps_rcounter (32'b0),
.up_pps_status (1'b0),
.up_pps_irq_mask (),
.up_adc_r1_mode(),
.up_adc_ce (),
.up_status_pn_err (1'b0),
.up_status_pn_oos (1'b0),
.up_status_or (1'b0),
.up_drp_sel (),
.up_drp_wr (),
.up_drp_addr (),
.up_drp_wdata (),
.up_drp_rdata (32'd0),
.up_drp_ready (1'd0),
.up_drp_locked (1'd1),
.adc_config_wr (),
.adc_config_ctrl (),
.adc_config_rd (32'd0),
.adc_ctrl_status (1'd0),
.up_usr_chanmax_out (),
.up_usr_chanmax_in (8),
.up_adc_gpio_in (32'b0),
.up_adc_gpio_out (),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s[8]),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s[8]),
.up_rack (up_rack_s[8]));
// up bus interface
up_axi #(
.AXI_ADDRESS_WIDTH (16)
) i_up_axi (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_axi_awvalid (s_axi_awvalid),
.up_axi_awaddr (s_axi_awaddr),
.up_axi_awready (s_axi_awready),
.up_axi_wvalid (s_axi_wvalid),
.up_axi_wdata (s_axi_wdata),
.up_axi_wstrb (s_axi_wstrb),
.up_axi_wready (s_axi_wready),
.up_axi_bvalid (s_axi_bvalid),
.up_axi_bresp (s_axi_bresp),
.up_axi_bready (s_axi_bready),
.up_axi_arvalid (s_axi_arvalid),
.up_axi_araddr (s_axi_araddr),
.up_axi_arready (s_axi_arready),
.up_axi_rvalid (s_axi_rvalid),
.up_axi_rresp (s_axi_rresp),
.up_axi_rdata (s_axi_rdata),
.up_axi_rready (s_axi_rready),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata),
.up_rack (up_rack));
endmodule