pluto_hdl_adi/projects/fmcomms2/common/fmcomms2_bd.tcl

189 lines
9.8 KiB
Tcl
Raw Normal View History

# fmcomms2
create_bd_port -dir I rx_clk_in_p
create_bd_port -dir I rx_clk_in_n
create_bd_port -dir I rx_frame_in_p
create_bd_port -dir I rx_frame_in_n
create_bd_port -dir I -from 5 -to 0 rx_data_in_p
create_bd_port -dir I -from 5 -to 0 rx_data_in_n
create_bd_port -dir O tx_clk_out_p
create_bd_port -dir O tx_clk_out_n
create_bd_port -dir O tx_frame_out_p
create_bd_port -dir O tx_frame_out_n
create_bd_port -dir O -from 5 -to 0 tx_data_out_p
create_bd_port -dir O -from 5 -to 0 tx_data_out_n
create_bd_port -dir O enable
create_bd_port -dir O txnrx
2015-08-27 15:41:16 +00:00
create_bd_port -dir I up_enable
create_bd_port -dir I up_txnrx
create_bd_port -dir O tdd_sync_o
create_bd_port -dir I tdd_sync_i
create_bd_port -dir O tdd_sync_t
# ad9361 core
set axi_ad9361 [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9361:1.0 axi_ad9361]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.ID {0}] $axi_ad9361
set axi_ad9361_dac_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9361_dac_dma]
set_property -dict [list CONFIG.DMA_TYPE_SRC {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {2}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.CYCLIC {1}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.SYNC_TRANSFER_START {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {1}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $axi_ad9361_dac_dma
set util_ad9361_dac_upack [create_bd_cell -type ip -vlnv analog.com:user:util_upack:1.0 util_ad9361_dac_upack]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] $util_ad9361_dac_upack
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {16}] $util_ad9361_dac_upack
set axi_ad9361_adc_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9361_adc_dma]
set_property -dict [list CONFIG.DMA_TYPE_SRC {2}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.CYCLIC {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.SYNC_TRANSFER_START {1}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $axi_ad9361_adc_dma
set util_ad9361_adc_pack [create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 util_ad9361_adc_pack]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] $util_ad9361_adc_pack
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {16}] $util_ad9361_adc_pack
set util_ad9361_adc_fifo [create_bd_cell -type ip -vlnv analog.com:user:util_wfifo:1.0 util_ad9361_adc_fifo]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] $util_ad9361_adc_fifo
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.DIN_ADDRESS_WIDTH {4}] $util_ad9361_adc_fifo
set_property -dict [list CONFIG.DIN_DATA_WIDTH {16}] $util_ad9361_adc_fifo
set_property -dict [list CONFIG.DOUT_DATA_WIDTH {16}] $util_ad9361_adc_fifo
set util_ad9361_tdd_sync [create_bd_cell -type ip -vlnv analog.com:user:util_tdd_sync:1.0 util_ad9361_tdd_sync]
set_property -dict [list CONFIG.TDD_SYNC_PERIOD {10000000}] $util_ad9361_tdd_sync
# connections
ad_connect sys_200m_clk axi_ad9361/delay_clk
ad_connect axi_ad9361_clk axi_ad9361/l_clk
ad_connect axi_ad9361_clk axi_ad9361/clk
ad_connect rx_clk_in_p axi_ad9361/rx_clk_in_p
ad_connect rx_clk_in_n axi_ad9361/rx_clk_in_n
ad_connect rx_frame_in_p axi_ad9361/rx_frame_in_p
ad_connect rx_frame_in_n axi_ad9361/rx_frame_in_n
ad_connect rx_data_in_p axi_ad9361/rx_data_in_p
ad_connect rx_data_in_n axi_ad9361/rx_data_in_n
ad_connect tx_clk_out_p axi_ad9361/tx_clk_out_p
ad_connect tx_clk_out_n axi_ad9361/tx_clk_out_n
ad_connect tx_frame_out_p axi_ad9361/tx_frame_out_p
ad_connect tx_frame_out_n axi_ad9361/tx_frame_out_n
ad_connect tx_data_out_p axi_ad9361/tx_data_out_p
ad_connect tx_data_out_n axi_ad9361/tx_data_out_n
ad_connect enable axi_ad9361/enable
ad_connect txnrx axi_ad9361/txnrx
2015-08-27 15:41:16 +00:00
ad_connect up_enable axi_ad9361/up_enable
ad_connect up_txnrx axi_ad9361/up_txnrx
ad_connect axi_ad9361_clk util_ad9361_adc_fifo/din_clk
ad_connect axi_ad9361/rst util_ad9361_adc_fifo/din_rst
ad_connect sys_cpu_clk util_ad9361_adc_fifo/dout_clk
ad_connect sys_cpu_resetn util_ad9361_adc_fifo/dout_rstn
ad_connect sys_cpu_clk util_ad9361_adc_pack/adc_clk
ad_connect sys_cpu_reset util_ad9361_adc_pack/adc_rst
ad_connect sys_cpu_clk axi_ad9361_adc_dma/fifo_wr_clk
ad_connect axi_ad9361/adc_enable_i0 util_ad9361_adc_fifo/din_enable_0
ad_connect axi_ad9361/adc_valid_i0 util_ad9361_adc_fifo/din_valid_0
ad_connect axi_ad9361/adc_data_i0 util_ad9361_adc_fifo/din_data_0
ad_connect axi_ad9361/adc_enable_q0 util_ad9361_adc_fifo/din_enable_1
ad_connect axi_ad9361/adc_valid_q0 util_ad9361_adc_fifo/din_valid_1
ad_connect axi_ad9361/adc_data_q0 util_ad9361_adc_fifo/din_data_1
ad_connect axi_ad9361/adc_enable_i1 util_ad9361_adc_fifo/din_enable_2
ad_connect axi_ad9361/adc_valid_i1 util_ad9361_adc_fifo/din_valid_2
ad_connect axi_ad9361/adc_data_i1 util_ad9361_adc_fifo/din_data_2
ad_connect axi_ad9361/adc_enable_q1 util_ad9361_adc_fifo/din_enable_3
ad_connect axi_ad9361/adc_valid_q1 util_ad9361_adc_fifo/din_valid_3
ad_connect axi_ad9361/adc_data_q1 util_ad9361_adc_fifo/din_data_3
ad_connect util_ad9361_adc_fifo/dout_enable_0 util_ad9361_adc_pack/adc_enable_0
ad_connect util_ad9361_adc_fifo/dout_valid_0 util_ad9361_adc_pack/adc_valid_0
ad_connect util_ad9361_adc_fifo/dout_data_0 util_ad9361_adc_pack/adc_data_0
ad_connect util_ad9361_adc_fifo/dout_enable_1 util_ad9361_adc_pack/adc_enable_1
ad_connect util_ad9361_adc_fifo/dout_valid_1 util_ad9361_adc_pack/adc_valid_1
ad_connect util_ad9361_adc_fifo/dout_data_1 util_ad9361_adc_pack/adc_data_1
ad_connect util_ad9361_adc_fifo/dout_enable_2 util_ad9361_adc_pack/adc_enable_2
ad_connect util_ad9361_adc_fifo/dout_valid_2 util_ad9361_adc_pack/adc_valid_2
ad_connect util_ad9361_adc_fifo/dout_data_2 util_ad9361_adc_pack/adc_data_2
ad_connect util_ad9361_adc_fifo/dout_enable_3 util_ad9361_adc_pack/adc_enable_3
ad_connect util_ad9361_adc_fifo/dout_valid_3 util_ad9361_adc_pack/adc_valid_3
ad_connect util_ad9361_adc_fifo/dout_data_3 util_ad9361_adc_pack/adc_data_3
ad_connect util_ad9361_adc_pack/adc_valid axi_ad9361_adc_dma/fifo_wr_en
ad_connect util_ad9361_adc_pack/adc_sync axi_ad9361_adc_dma/fifo_wr_sync
ad_connect util_ad9361_adc_pack/adc_data axi_ad9361_adc_dma/fifo_wr_din
ad_connect axi_ad9361_adc_dma/fifo_wr_overflow util_ad9361_adc_fifo/dout_ovf
ad_connect util_ad9361_adc_fifo/din_ovf axi_ad9361/adc_dovf
ad_connect axi_ad9361_clk util_ad9361_dac_upack/dac_clk
ad_connect axi_ad9361_clk axi_ad9361_dac_dma/fifo_rd_clk
ad_connect util_ad9361_dac_upack/dac_enable_0 axi_ad9361/dac_enable_i0
ad_connect util_ad9361_dac_upack/dac_valid_0 axi_ad9361/dac_valid_i0
ad_connect util_ad9361_dac_upack/dac_data_0 axi_ad9361/dac_data_i0
ad_connect util_ad9361_dac_upack/dac_enable_1 axi_ad9361/dac_enable_q0
ad_connect util_ad9361_dac_upack/dac_valid_1 axi_ad9361/dac_valid_q0
ad_connect util_ad9361_dac_upack/dac_data_1 axi_ad9361/dac_data_q0
ad_connect util_ad9361_dac_upack/dac_enable_2 axi_ad9361/dac_enable_i1
ad_connect util_ad9361_dac_upack/dac_valid_2 axi_ad9361/dac_valid_i1
ad_connect util_ad9361_dac_upack/dac_data_2 axi_ad9361/dac_data_i1
ad_connect util_ad9361_dac_upack/dac_enable_3 axi_ad9361/dac_enable_q1
ad_connect util_ad9361_dac_upack/dac_valid_3 axi_ad9361/dac_valid_q1
ad_connect util_ad9361_dac_upack/dac_data_3 axi_ad9361/dac_data_q1
ad_connect util_ad9361_dac_upack/dac_valid axi_ad9361_dac_dma/fifo_rd_en
ad_connect util_ad9361_dac_upack/dac_data axi_ad9361_dac_dma/fifo_rd_dout
ad_connect axi_ad9361_dac_dma/fifo_rd_underflow axi_ad9361/dac_dunf
ad_connect sys_cpu_clk util_ad9361_tdd_sync/clk
ad_connect sys_cpu_resetn util_ad9361_tdd_sync/rstn
ad_connect util_ad9361_tdd_sync/sync_out axi_ad9361/tdd_sync
ad_connect util_ad9361_tdd_sync/sync_mode axi_ad9361/tdd_sync_cntr
ad_connect tdd_sync_t axi_ad9361/tdd_sync_cntr
ad_connect tdd_sync_o util_ad9361_tdd_sync/sync_out
ad_connect tdd_sync_i util_ad9361_tdd_sync/sync_in
# interconnects
ad_cpu_interconnect 0x79020000 axi_ad9361
ad_cpu_interconnect 0x7C400000 axi_ad9361_adc_dma
ad_cpu_interconnect 0x7C420000 axi_ad9361_dac_dma
ad_mem_hp1_interconnect sys_cpu_clk sys_ps7/S_AXI_HP1
ad_mem_hp1_interconnect sys_cpu_clk axi_ad9361_adc_dma/m_dest_axi
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_cpu_clk axi_ad9361_dac_dma/m_src_axi
ad_connect sys_cpu_resetn axi_ad9361_adc_dma/m_dest_axi_aresetn
ad_connect sys_cpu_resetn axi_ad9361_dac_dma/m_src_axi_aresetn
# interrupts
ad_cpu_interrupt ps-13 mb-12 axi_ad9361_adc_dma/irq
ad_cpu_interrupt ps-12 mb-13 axi_ad9361_dac_dma/irq
# ila (adc)
set ila_adc [create_bd_cell -type ip -vlnv xilinx.com:ip:ila:6.0 ila_adc]
set_property -dict [list CONFIG.C_MONITOR_TYPE {Native}] $ila_adc
set_property -dict [list CONFIG.C_TRIGIN_EN {false}] $ila_adc
set_property -dict [list CONFIG.C_EN_STRG_QUAL {1}] $ila_adc
set_property -dict [list CONFIG.C_NUM_OF_PROBES {5}] $ila_adc
set_property -dict [list CONFIG.C_PROBE0_WIDTH {16}] $ila_adc
set_property -dict [list CONFIG.C_PROBE1_WIDTH {16}] $ila_adc
set_property -dict [list CONFIG.C_PROBE2_WIDTH {16}] $ila_adc
set_property -dict [list CONFIG.C_PROBE3_WIDTH {16}] $ila_adc
set_property -dict [list CONFIG.C_PROBE4_WIDTH {1}] $ila_adc
ad_connect util_ad9361_adc_fifo/dout_data_0 ila_adc/probe0
ad_connect util_ad9361_adc_fifo/dout_data_1 ila_adc/probe1
ad_connect util_ad9361_adc_fifo/dout_data_2 ila_adc/probe2
ad_connect util_ad9361_adc_fifo/dout_data_3 ila_adc/probe3
ad_connect util_ad9361_adc_fifo/dout_valid_0 ila_adc/probe4
ad_connect sys_cpu_clk ila_adc/clk