zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/axi_ad9361/axi_ad9361_rx.v

409 lines
11 KiB
Coq
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ADC channel-need to work on dual mode for pn sequence
`timescale 1ns/100ps
module axi_ad9361_rx (
library/axi_ad9361: mmcm rst for plls
2016-05-04 17:39:26 +00:00
// common
mmcm_rst,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// adc interface
adc_rst,
adc_clk,
adc_valid,
adc_data,
adc_status,
adc_r1_mode,
adc_ddr_edgesel,
dac_data,
// delay interface
up_dld,
up_dwdata,
up_drdata,
delay_clk,
delay_rst,
delay_locked,
// dma interface
adc_enable_i0,
adc_valid_i0,
adc_data_i0,
adc_enable_q0,
adc_valid_q0,
adc_data_q0,
adc_enable_i1,
adc_valid_i1,
adc_data_i1,
adc_enable_q1,
adc_valid_q1,
adc_data_q1,
adc_dovf,
adc_dunf,
// gpio
up_adc_gpio_in,
up_adc_gpio_out,
// processor interface
up_rstn,
up_clk,
up_wreq,
up_waddr,
up_wdata,
up_wack,
up_rreq,
up_raddr,
up_rdata,
up_rack);
// parameters
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
parameter DATAPATH_DISABLE = 0;
parameter ID = 0;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
library/axi_ad9361: mmcm rst for plls
2016-05-04 17:39:26 +00:00
// common
output mmcm_rst;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// adc interface
output adc_rst;
input adc_clk;
input adc_valid;
input [47:0] adc_data;
input adc_status;
output adc_r1_mode;
output adc_ddr_edgesel;
input [47:0] dac_data;
// delay interface
ad9361- cmos mode
2016-03-04 15:38:58 +00:00
output [12:0] up_dld;
output [64:0] up_dwdata;
input [64:0] up_drdata;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
input delay_clk;
output delay_rst;
input delay_locked;
// dma interface
output adc_enable_i0;
output adc_valid_i0;
output [15:0] adc_data_i0;
output adc_enable_q0;
output adc_valid_q0;
output [15:0] adc_data_q0;
output adc_enable_i1;
output adc_valid_i1;
output [15:0] adc_data_i1;
output adc_enable_q1;
output adc_valid_q1;
output [15:0] adc_data_q1;
input adc_dovf;
input adc_dunf;
// gpio
input [31:0] up_adc_gpio_in;
output [31:0] up_adc_gpio_out;
// processor interface
input up_rstn;
input up_clk;
input up_wreq;
input [13:0] up_waddr;
input [31:0] up_wdata;
output up_wack;
input up_rreq;
input [13:0] up_raddr;
output [31:0] up_rdata;
output up_rack;
// internal registers
reg up_status_pn_err = 'd0;
reg up_status_pn_oos = 'd0;
reg up_status_or = 'd0;
reg [31:0] up_rdata = 'd0;
reg up_rack = 'd0;
reg up_wack = 'd0;
// internal signals
wire [15:0] adc_dcfilter_data_out_0_s;
wire [15:0] adc_dcfilter_data_out_1_s;
wire [15:0] adc_dcfilter_data_out_2_s;
wire [15:0] adc_dcfilter_data_out_3_s;
wire [ 3:0] up_adc_pn_err_s;
wire [ 3:0] up_adc_pn_oos_s;
wire [ 3:0] up_adc_or_s;
wire [31:0] up_rdata_s[0:5];
wire up_rack_s[0:5];
wire up_wack_s[0:5];
// processor read interface
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_status_pn_err <= 'd0;
up_status_pn_oos <= 'd0;
up_status_or <= 'd0;
up_rdata <= 'd0;
up_rack <= 'd0;
up_wack <= 'd0;
end else begin
up_status_pn_err <= | up_adc_pn_err_s;
up_status_pn_oos <= | up_adc_pn_oos_s;
up_status_or <= | up_adc_or_s;
up_rdata <= up_rdata_s[0] | up_rdata_s[1] | up_rdata_s[2] |
up_rdata_s[3] | up_rdata_s[4] | up_rdata_s[5];
up_rack <= up_rack_s[0] | up_rack_s[1] | up_rack_s[2] |
up_rack_s[3] | up_rack_s[4] | up_rack_s[5];
up_wack <= up_wack_s[0] | up_wack_s[1] | up_wack_s[2] |
up_wack_s[3] | up_wack_s[4] | up_wack_s[5];
end
end
// channel 0 (i)
axi_ad9361_rx_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.Q_OR_I_N(0),
.CHANNEL_ID(0),
.DATAPATH_DISABLE (DATAPATH_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_rx_channel_0 (
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_valid (adc_valid),
.adc_data (adc_data[11:0]),
.adc_data_q (adc_data[23:12]),
.adc_or (1'b0),
.dac_data (dac_data[11:0]),
.adc_dcfilter_data_out (adc_dcfilter_data_out_0_s),
.adc_dcfilter_data_in (adc_dcfilter_data_out_1_s),
.adc_iqcor_valid (adc_valid_i0),
.adc_iqcor_data (adc_data_i0),
.adc_enable (adc_enable_i0),
.up_adc_pn_err (up_adc_pn_err_s[0]),
.up_adc_pn_oos (up_adc_pn_oos_s[0]),
.up_adc_or (up_adc_or_s[0]),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[0]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[0]),
.up_rack (up_rack_s[0]));
// channel 1 (q)
axi_ad9361_rx_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.Q_OR_I_N(1),
.CHANNEL_ID(1),
.DATAPATH_DISABLE (DATAPATH_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_rx_channel_1 (
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_valid (adc_valid),
.adc_data (adc_data[23:12]),
.adc_data_q (adc_data[11:0]),
.adc_or (1'b0),
.dac_data (dac_data[23:12]),
.adc_dcfilter_data_out (adc_dcfilter_data_out_1_s),
.adc_dcfilter_data_in (adc_dcfilter_data_out_0_s),
.adc_iqcor_valid (adc_valid_q0),
.adc_iqcor_data (adc_data_q0),
.adc_enable (adc_enable_q0),
.up_adc_pn_err (up_adc_pn_err_s[1]),
.up_adc_pn_oos (up_adc_pn_oos_s[1]),
.up_adc_or (up_adc_or_s[1]),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[1]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[1]),
.up_rack (up_rack_s[1]));
// channel 2 (i)
axi_ad9361_rx_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.Q_OR_I_N(0),
.CHANNEL_ID(2),
.DATAPATH_DISABLE (DATAPATH_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_rx_channel_2 (
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_valid (adc_valid),
.adc_data (adc_data[35:24]),
.adc_data_q (adc_data[47:36]),
.adc_or (1'b0),
.dac_data (dac_data[35:24]),
.adc_dcfilter_data_out (adc_dcfilter_data_out_2_s),
.adc_dcfilter_data_in (adc_dcfilter_data_out_3_s),
.adc_iqcor_valid (adc_valid_i1),
.adc_iqcor_data (adc_data_i1),
.adc_enable (adc_enable_i1),
.up_adc_pn_err (up_adc_pn_err_s[2]),
.up_adc_pn_oos (up_adc_pn_oos_s[2]),
.up_adc_or (up_adc_or_s[2]),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[2]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[2]),
.up_rack (up_rack_s[2]));
// channel 3 (q)
axi_ad9361_rx_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.Q_OR_I_N(1),
.CHANNEL_ID(3),
.DATAPATH_DISABLE (DATAPATH_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_rx_channel_3 (
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_valid (adc_valid),
.adc_data (adc_data[47:36]),
.adc_data_q (adc_data[35:24]),
.adc_or (1'b0),
.dac_data (dac_data[47:36]),
.adc_dcfilter_data_out (adc_dcfilter_data_out_3_s),
.adc_dcfilter_data_in (adc_dcfilter_data_out_2_s),
.adc_iqcor_valid (adc_valid_q1),
.adc_iqcor_data (adc_data_q1),
.adc_enable (adc_enable_q1),
.up_adc_pn_err (up_adc_pn_err_s[3]),
.up_adc_pn_oos (up_adc_pn_oos_s[3]),
.up_adc_or (up_adc_or_s[3]),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[3]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[3]),
.up_rack (up_rack_s[3]));
// common processor control
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
up_adc_common #(.ID (ID)) i_up_adc_common (
library/axi_ad9361: mmcm rst for plls
2016-05-04 17:39:26 +00:00
.mmcm_rst (mmcm_rst),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_r1_mode (adc_r1_mode),
.adc_ddr_edgesel (adc_ddr_edgesel),
.adc_pin_mode (),
.adc_status (adc_status),
.adc_sync_status (1'd0),
.adc_status_ovf (adc_dovf),
.adc_status_unf (adc_dunf),
.adc_clk_ratio (32'd1),
.adc_start_code (),
.adc_sync (),
.up_status_pn_err (up_status_pn_err),
.up_status_pn_oos (up_status_pn_oos),
.up_status_or (up_status_or),
.up_drp_sel (),
.up_drp_wr (),
.up_drp_addr (),
.up_drp_wdata (),
.up_drp_rdata (16'd0),
.up_drp_ready (1'd0),
.up_drp_locked (1'd1),
.up_usr_chanmax (),
.adc_usr_chanmax (8'd3),
.up_adc_gpio_in (up_adc_gpio_in),
.up_adc_gpio_out (up_adc_gpio_out),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[4]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[4]),
.up_rack (up_rack_s[4]));
// adc delay control
ad9361- cmos mode
2016-03-04 15:38:58 +00:00
up_delay_cntrl #(.DATA_WIDTH(13), .BASE_ADDRESS(6'h02)) i_delay_cntrl (
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked),
.up_dld (up_dld),
.up_dwdata (up_dwdata),
.up_drdata (up_drdata),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[5]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[5]),
.up_rack (up_rack_s[5]));
endmodule
// ***************************************************************************
// ***************************************************************************