zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/fmcadc4/common/fmcadc4_bd.tcl

192 lines
9.7 KiB
Tcl
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# fmcadc4
create_bd_port -dir I rx_ref_clk
create_bd_port -dir O rx_sync
create_bd_port -dir I rx_sysref
create_bd_port -dir I -from 7 -to 0 rx_data_p
create_bd_port -dir I -from 7 -to 0 rx_data_n
create_bd_port -dir O adc_clk
create_bd_port -dir O adc_enable_0
create_bd_port -dir O adc_valid_0
create_bd_port -dir O -from 63 -to 0 adc_data_0
create_bd_port -dir O adc_enable_1
create_bd_port -dir O adc_valid_1
create_bd_port -dir O -from 63 -to 0 adc_data_1
create_bd_port -dir O adc_enable_2
create_bd_port -dir O adc_valid_2
create_bd_port -dir O -from 63 -to 0 adc_data_2
create_bd_port -dir O adc_enable_3
create_bd_port -dir O adc_valid_3
create_bd_port -dir O -from 63 -to 0 adc_data_3
create_bd_port -dir I adc_dwr
create_bd_port -dir I adc_dsync
create_bd_port -dir I -from 255 -to 0 adc_ddata
# adc peripherals
set axi_ad9680_core_0 [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9680:1.0 axi_ad9680_core_0]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.ID {0}] $axi_ad9680_core_0
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
set axi_ad9680_core_1 [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9680:1.0 axi_ad9680_core_1]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.ID {1}] $axi_ad9680_core_1
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
set axi_ad9680_jesd [create_bd_cell -type ip -vlnv xilinx.com:ip:jesd204:6.0 axi_ad9680_jesd]
set_property -dict [list CONFIG.C_NODE_IS_TRANSMIT {0}] $axi_ad9680_jesd
set_property -dict [list CONFIG.C_LANES {8}] $axi_ad9680_jesd
set axi_ad9680_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9680_dma]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.DMA_TYPE_SRC {1}] $axi_ad9680_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.ID {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.SYNC_TRANSFER_START {1}] $axi_ad9680_dma
set_property -dict [list CONFIG.DMA_LENGTH_WIDTH {24}] $axi_ad9680_dma
axi_dmac: Change parameter name 2D_TRANSFER Parameter name can't start with numbers, 2D_TRANSFER was changed to DMA_2D_TRANSFER
2015-08-20 07:13:39 +00:00
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $axi_ad9680_dma
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CYCLIC {0}] $axi_ad9680_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $axi_ad9680_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $axi_ad9680_dma
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# dac/adc common gt
set axi_fmcadc4_gt [create_bd_cell -type ip -vlnv analog.com:user:axi_jesd_gt:1.0 axi_fmcadc4_gt]
set_property -dict [list CONFIG.PCORE_NUM_OF_RX_LANES {8}] $axi_fmcadc4_gt
# connections (gt)
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
ad_connect axi_fmcadc4_gt/ref_clk_q rx_ref_clk
ad_connect axi_fmcadc4_gt/rx_data_p rx_data_p
ad_connect axi_fmcadc4_gt/rx_data_n rx_data_n
ad_connect axi_fmcadc4_gt/rx_sync rx_sync
ad_connect axi_fmcadc4_gt/rx_ext_sysref rx_sysref
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# connections (adc)
ad_connect axi_fmcadc4_gt/rx_clk_g adc_clk
ad_connect axi_fmcadc4_gt/tx_clk_g axi_fmcadc4_gt/tx_clk
ad_connect axi_fmcadc4_gt/rx_clk_g axi_fmcadc4_gt/rx_clk
ad_connect axi_fmcadc4_gt/rx_clk_g axi_ad9680_core_0/rx_clk
ad_connect axi_fmcadc4_gt/rx_clk_g axi_ad9680_core_1/rx_clk
ad_connect axi_fmcadc4_gt/rx_clk_g axi_ad9680_jesd/rx_core_clk
ad_connect axi_fmcadc4_gt/rx_rst axi_ad9680_jesd/rx_reset
ad_connect axi_fmcadc4_gt/rx_sysref axi_ad9680_jesd/rx_sysref
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_charisk
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {4}] [get_bd_cells util_bsplit_rx_gt_charisk]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {8}] [get_bd_cells util_bsplit_rx_gt_charisk]
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_connect util_bsplit_rx_gt_charisk/data axi_fmcadc4_gt/rx_gt_charisk
ad_connect util_bsplit_rx_gt_charisk/split_data_0 axi_ad9680_jesd/gt0_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_1 axi_ad9680_jesd/gt1_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_2 axi_ad9680_jesd/gt2_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_3 axi_ad9680_jesd/gt3_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_4 axi_ad9680_jesd/gt4_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_5 axi_ad9680_jesd/gt5_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_6 axi_ad9680_jesd/gt6_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_7 axi_ad9680_jesd/gt7_rxcharisk
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_disperr
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {4}] [get_bd_cells util_bsplit_rx_gt_disperr]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {8}] [get_bd_cells util_bsplit_rx_gt_disperr]
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_connect util_bsplit_rx_gt_disperr/data axi_fmcadc4_gt/rx_gt_disperr
ad_connect util_bsplit_rx_gt_disperr/split_data_0 axi_ad9680_jesd/gt0_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_1 axi_ad9680_jesd/gt1_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_2 axi_ad9680_jesd/gt2_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_3 axi_ad9680_jesd/gt3_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_4 axi_ad9680_jesd/gt4_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_5 axi_ad9680_jesd/gt5_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_6 axi_ad9680_jesd/gt6_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_7 axi_ad9680_jesd/gt7_rxdisperr
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_notintable
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {4}] [get_bd_cells util_bsplit_rx_gt_notintable]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {8}] [get_bd_cells util_bsplit_rx_gt_notintable]
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_connect util_bsplit_rx_gt_notintable/data axi_fmcadc4_gt/rx_gt_notintable
ad_connect util_bsplit_rx_gt_notintable/split_data_0 axi_ad9680_jesd/gt0_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_1 axi_ad9680_jesd/gt1_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_2 axi_ad9680_jesd/gt2_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_3 axi_ad9680_jesd/gt3_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_4 axi_ad9680_jesd/gt4_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_5 axi_ad9680_jesd/gt5_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_6 axi_ad9680_jesd/gt6_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_7 axi_ad9680_jesd/gt7_rxnotintable
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_data
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {32}] [get_bd_cells util_bsplit_rx_gt_data]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {8}] [get_bd_cells util_bsplit_rx_gt_data]
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_connect util_bsplit_rx_gt_data/data axi_fmcadc4_gt/rx_gt_data
ad_connect util_bsplit_rx_gt_data/split_data_0 axi_ad9680_jesd/gt0_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_1 axi_ad9680_jesd/gt1_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_2 axi_ad9680_jesd/gt2_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_3 axi_ad9680_jesd/gt3_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_4 axi_ad9680_jesd/gt4_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_5 axi_ad9680_jesd/gt5_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_6 axi_ad9680_jesd/gt6_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_7 axi_ad9680_jesd/gt7_rxdata
ad_connect axi_fmcadc4_gt/rx_rst_done axi_ad9680_jesd/rx_reset_done
ad_connect axi_fmcadc4_gt/rx_ip_comma_align axi_ad9680_jesd/rxencommaalign_out
ad_connect axi_fmcadc4_gt/rx_ip_sync axi_ad9680_jesd/rx_sync
ad_connect axi_fmcadc4_gt/rx_ip_sof axi_ad9680_jesd/rx_start_of_frame
ad_connect axi_fmcadc4_gt/rx_ip_data axi_ad9680_jesd/rx_tdata
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_data
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {128}] [get_bd_cells util_bsplit_rx_data]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {2}] [get_bd_cells util_bsplit_rx_data]
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_connect util_bsplit_rx_data/data axi_fmcadc4_gt/rx_data
ad_connect util_bsplit_rx_data/split_data_0 axi_ad9680_core_0/rx_data
ad_connect util_bsplit_rx_data/split_data_1 axi_ad9680_core_1/rx_data
ad_connect axi_ad9680_core_0/adc_enable_0 adc_enable_0
ad_connect axi_ad9680_core_0/adc_valid_0 adc_valid_0
ad_connect axi_ad9680_core_0/adc_data_0 adc_data_0
ad_connect axi_ad9680_core_0/adc_enable_1 adc_enable_1
ad_connect axi_ad9680_core_0/adc_valid_1 adc_valid_1
ad_connect axi_ad9680_core_0/adc_data_1 adc_data_1
ad_connect axi_ad9680_core_1/adc_enable_0 adc_enable_2
ad_connect axi_ad9680_core_1/adc_valid_0 adc_valid_2
ad_connect axi_ad9680_core_1/adc_data_0 adc_data_2
ad_connect axi_ad9680_core_1/adc_enable_1 adc_enable_3
ad_connect axi_ad9680_core_1/adc_valid_1 adc_valid_3
ad_connect axi_ad9680_core_1/adc_data_1 adc_data_3
ad_connect axi_ad9680_fifo/adc_rst axi_fmcadc4_gt/rx_rst
ad_connect axi_ad9680_core_0/adc_clk axi_ad9680_fifo/adc_clk
ad_connect axi_ad9680_core_0/adc_dovf axi_ad9680_fifo/adc_wovf
ad_connect adc_dwr axi_ad9680_fifo/adc_wr
ad_connect adc_ddata axi_ad9680_fifo/adc_wdata
ad_connect sys_cpu_clk axi_ad9680_fifo/dma_clk
ad_connect sys_cpu_clk axi_ad9680_dma/s_axis_aclk
ad_connect axi_ad9680_fifo/dma_wr axi_ad9680_dma/s_axis_valid
ad_connect axi_ad9680_fifo/dma_wdata axi_ad9680_dma/s_axis_data
ad_connect axi_ad9680_fifo/dma_wready axi_ad9680_dma/s_axis_ready
ad_connect axi_ad9680_fifo/dma_xfer_req axi_ad9680_dma/s_axis_xfer_req
# interconnect (cpu)
ad_cpu_interconnect 0x44A60000 axi_fmcadc4_gt
ad_cpu_interconnect 0x44A00000 axi_ad9680_core_0
ad_cpu_interconnect 0x44A10000 axi_ad9680_core_1
ad_cpu_interconnect 0x44A91000 axi_ad9680_jesd
ad_cpu_interconnect 0x7c400000 axi_ad9680_dma
# gt uses hp3, and 100MHz clock for both DRP and AXI4
ad_mem_hp3_interconnect sys_cpu_clk sys_ps7/S_AXI_HP3
ad_mem_hp3_interconnect sys_cpu_clk axi_fmcadc4_gt/m_axi
# interconnect (mem/adc)
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_cpu_clk axi_ad9680_dma/m_dest_axi
ad_connect sys_cpu_resetn axi_ad9680_dma/m_dest_axi_aresetn
# interrupts
ad_cpu_interrupt ps-13 mb-13 axi_ad9680_dma/irq