pluto_hdl_adi/library/axi_dmac/request_generator.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory
//      of this repository (LICENSE_GPL2), and also online at:
//      <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
//   2. An ADI specific BSD license, which can be found in the top level directory
//      of this repository (LICENSE_ADIBSD), and also on-line at:
//      https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
//      This will allow to generate bit files and not release the source code,
//      as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module dmac_request_generator #(

  parameter ID_WIDTH = 3,
  parameter BURSTS_PER_TRANSFER_WIDTH = 17)(

  input clk,
  input resetn,

  output [ID_WIDTH-1:0] request_id,
  input [ID_WIDTH-1:0] response_id,

  input rewind_req_valid,
  input [ID_WIDTH+3-1:0] rewind_req_data,
  output rewind_state,

  output abort_req,

  output reg completion_req_valid = 1'b0,
  output completion_req_last,
  output [1:0] completion_transfer_id,

  input req_valid,
  output reg req_ready,
  input [BURSTS_PER_TRANSFER_WIDTH-1:0] req_burst_count,
  input req_xlast,

  input enable,

  output eot
);

`include "inc_id.vh"

localparam STATE_IDLE      = 3'h0;
localparam STATE_GEN_ID    = 3'h1;
localparam STATE_REWIND_ID = 3'h2;
localparam STATE_CONSUME   = 3'h3;
localparam STATE_WAIT_LAST = 3'h4;

reg [2:0] state = STATE_IDLE;
reg [2:0] nx_state;

reg [1:0] rew_transfer_id = 1'b0;
reg rew_req_xlast;
reg [ID_WIDTH-1:0] rew_id = 'h0;

reg cur_transfer_id = 1'b0;
reg cur_req_xlast;

wire transfer_id_match;
reg nx_completion_req_valid;

/*
 * Here we only need to count the number of bursts, which means we can ignore
 * the lower bits of the byte count. The last last burst may not contain the
 * maximum number of bytes, but the address_generator and data_mover will take
 * care that only the requested ammount of bytes is transfered.
 */

reg [BURSTS_PER_TRANSFER_WIDTH-1:0] burst_count = 'h00;
reg [BURSTS_PER_TRANSFER_WIDTH-1:0] cur_burst_length = 'h00;
reg [ID_WIDTH-1:0] id;
wire [ID_WIDTH-1:0] id_next = inc_id(id);
wire incr_en;
wire incr_id;

assign eot = burst_count == 'h00;
assign request_id = id;

assign incr_en = (response_id != id_next) && (enable == 1'b1);
assign incr_id = (state == STATE_GEN_ID) && (incr_en == 1'b1);

always @(posedge clk) begin
  if (state == STATE_IDLE) begin
    burst_count <= req_burst_count;
  end else if (state == STATE_REWIND_ID) begin
    burst_count <= cur_burst_length;
  end else if (incr_id == 1'b1) begin
    burst_count <= burst_count - 1'b1;
  end
end
always @(posedge clk) begin
  if (req_ready == 1'b1 & req_valid == 1'b1) begin
    cur_req_xlast <= req_xlast;
    cur_burst_length <= req_burst_count;
  end
end

always @(posedge clk) begin
  if (resetn == 1'b0) begin
    id <= 'h0;
  end else if (state == STATE_REWIND_ID) begin
    id <= rew_id;
  end else if (incr_id == 1'b1) begin
    id <= id_next;
  end
end

always @(posedge clk) begin
  if (resetn == 1'b0) begin
    req_ready <= 1'b0;
  end else begin
    req_ready <= (nx_state == STATE_IDLE || nx_state == STATE_CONSUME);
  end
end

assign transfer_id_match = cur_transfer_id == rew_transfer_id[0];

always @(posedge clk) begin
  if (resetn == 1'b0) begin
    cur_transfer_id <= 1'b0;
  end else if (req_valid == 1'b1 && req_ready == 1'b1) begin
    cur_transfer_id <= ~cur_transfer_id;
  end
end

/* 
 * Once rewind request is received we need to stop incrementing the burst ID.
 *
 * If the current segment matches the segment that was interrupted and
 * if it was a last segment we ignore consecutive segments until the last
 * segment is received, in other case we can jump to the next segment. 
 * 
 * If the current segment is newer than the one got interrupted and the
 * interrupted one was a last segment we need to replay the current
 * segment with the adjusted burst ID. If the interrupted segment was not last
 * we need to consume/ignore all segments until a last segment is received.
 *
 * Completion requests are generated for every segment that is
 * consumed/ignored. These are handled by the response_manager once the
 * interrupted segment got transferred to the destination.
 */
always @(*) begin
  nx_state = state;
  nx_completion_req_valid = 0;
  case (state)
    STATE_IDLE: begin
      if (rewind_req_valid == 1'b1) begin
        nx_state = STATE_REWIND_ID;
      end else if (req_valid == 1'b1) begin
        nx_state = STATE_GEN_ID;
      end
    end
    STATE_GEN_ID: begin
      if (rewind_req_valid == 1'b1) begin
        nx_state = STATE_REWIND_ID;
      end else if (eot == 1'b1 && incr_en == 1'b1) begin
        nx_state = STATE_IDLE;
      end
    end
    STATE_REWIND_ID: begin
      if (transfer_id_match) begin
        if (rew_req_xlast) begin
          nx_state = STATE_IDLE;
        end else begin
          nx_state = STATE_CONSUME;
        end
      end else begin
        if (rew_req_xlast) begin
          nx_state = STATE_GEN_ID;
        end else if (cur_req_xlast) begin
          nx_state = STATE_IDLE;
          nx_completion_req_valid = 1;
        end else begin
          nx_state = STATE_CONSUME;
          nx_completion_req_valid = 1;
        end
      end
    end
    STATE_CONSUME: begin
      if (req_valid) begin
        nx_completion_req_valid = 1;
        nx_state = STATE_WAIT_LAST;
      end
    end
    STATE_WAIT_LAST:begin
      if (cur_req_xlast) begin
        nx_state = STATE_IDLE;
      end else begin
        nx_state = STATE_CONSUME;
      end
    end

    default: begin
      nx_state = STATE_IDLE;
    end
  endcase
end

always @(posedge clk) begin
  if (resetn == 1'b0) begin
    state <= STATE_IDLE;
  end else begin
    state <= nx_state;
  end
end

always @(posedge clk) begin
  if (rewind_req_valid == 1'b1) begin
    {rew_transfer_id, rew_req_xlast, rew_id} <= rewind_req_data;
  end
end

always @(posedge clk) begin
  if (resetn == 1'b0) begin
    completion_req_valid <= 1'b0;
  end else begin
    completion_req_valid <= nx_completion_req_valid;
  end
end
assign completion_req_last = cur_req_xlast;
assign completion_transfer_id = rew_transfer_id;

assign rewind_state = (state == STATE_REWIND_ID);

assign abort_req = (state == STATE_REWIND_ID) && !rew_req_xlast && !cur_req_xlast;

endmodule