pluto_hdl_adi/library/util_adcfifo/util_adcfifo_hw.tcl

package require qsys
source ../scripts/adi_env.tcl
source ../scripts/adi_ip_alt.tcl

ad_ip_create util_adcfifo {UTIL ADC FIFO Interface}
set_module_property ELABORATION_CALLBACK p_util_adcfifo

# files

ad_ip_files util_adcfifo [list\
  $ad_hdl_dir/library/common/ad_axis_inf_rx.v \
  util_adcfifo.v \
  util_adcfifo_constr.sdc]

# parameters

ad_ip_parameter DEVICE_FAMILY STRING {Arria 10}
ad_ip_parameter DEVICE_TYPE INTEGER 1
ad_ip_parameter ADC_DATA_WIDTH INTEGER 256
ad_ip_parameter DMA_DATA_WIDTH INTEGER 64
ad_ip_parameter DMA_READY_ENABLE INTEGER 1
ad_ip_parameter DMA_ADDRESS_WIDTH INTEGER 10

# elaborate

proc p_util_adcfifo {} {

  # read parameters

  set m_device_family [get_parameter_value "DEVICE_FAMILY"]
  set m_adc_data_width [get_parameter_value "ADC_DATA_WIDTH"]
  set m_dma_addr_width [get_parameter_value "DMA_ADDRESS_WIDTH"]
  set m_dma_data_width [get_parameter_value "DMA_DATA_WIDTH"]

  # altera memory

  add_hdl_instance alt_mem_asym alt_mem_asym
  set_instance_parameter_value alt_mem_asym DEVICE_FAMILY $m_device_family
  set_instance_parameter_value alt_mem_asym A_ADDRESS_WIDTH 0
  set_instance_parameter_value alt_mem_asym A_DATA_WIDTH $m_adc_data_width
  set_instance_parameter_value alt_mem_asym B_ADDRESS_WIDTH $m_dma_addr_width
  set_instance_parameter_value alt_mem_asym B_DATA_WIDTH $m_dma_data_width

  # interfaces

  ad_alt_intf clock adc_clk input 1 adc_clk
  ad_alt_intf reset adc_rst input 1 if_adc_clk
  ad_alt_intf signal adc_wr input 1 valid
  ad_alt_intf signal adc_wdata input ADC_DATA_WIDTH data
  ad_alt_intf signal adc_wovf output 1 ovf

  ad_alt_intf clock dma_clk input 1 clk
  ad_alt_intf signal dma_wr output 1 valid
  ad_alt_intf signal dma_wdata output DMA_DATA_WIDTH data
  ad_alt_intf signal dma_wready input 1 ready
  ad_alt_intf signal dma_xfer_req input 1 xfer_req
  ad_alt_intf signal dma_xfer_status output 4 xfer_status
}