zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/axi_ad9361/axi_ad9361_tx.v

440 lines
13 KiB
Coq
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// ***************************************************************************
// ***************************************************************************
all: Update license for all hdl source files All the hdl (verilog and vhdl) source files were updated. If a file did not have any license, it was added into it. Files, which were generated by a tool (like Matlab) or were took over from other source (like opencores.org), were unchanged. New license looks as follows: Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. Each core or library found in this collection may have its own licensing terms. The user should keep this in in mind while exploring these cores. Redistribution and use in source and binary forms, with or without modification of this file, are permitted under the terms of either (at the option of the user): 1. The GNU General Public License version 2 as published by the Free Software Foundation, which can be found in the top level directory, or at: https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html OR 2. An ADI specific BSD license as noted in the top level directory, or on-line at: https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 08:44:52 +00:00
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
//
license: Add some clarification to the header license
2017-05-31 15:15:24 +00:00
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
license: Fix a spelling mistake
2018-03-14 14:45:47 +00:00
// freedoms and responsibilities that he or she has by using this source/core.
license: Add some clarification to the header license
2017-05-31 15:15:24 +00:00
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
license: Update license terms in hdl source files Fix a few gramatical error, fix the path of the top level license files.
2017-05-29 06:55:41 +00:00
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
//
license: Update license terms in hdl source files Fix a few gramatical error, fix the path of the top level license files.
2017-05-29 06:55:41 +00:00
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
//
all: Update license for all hdl source files All the hdl (verilog and vhdl) source files were updated. If a file did not have any license, it was added into it. Files, which were generated by a tool (like Matlab) or were took over from other source (like opencores.org), were unchanged. New license looks as follows: Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. Each core or library found in this collection may have its own licensing terms. The user should keep this in in mind while exploring these cores. Redistribution and use in source and binary forms, with or without modification of this file, are permitted under the terms of either (at the option of the user): 1. The GNU General Public License version 2 as published by the Free Software Foundation, which can be found in the top level directory, or at: https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html OR 2. An ADI specific BSD license as noted in the top level directory, or on-line at: https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 08:44:52 +00:00
// 1. The GNU General Public License version 2 as published by the
license: Add some clarification to the header license
2017-05-31 15:15:24 +00:00
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
all: Update license for all hdl source files All the hdl (verilog and vhdl) source files were updated. If a file did not have any license, it was added into it. Files, which were generated by a tool (like Matlab) or were took over from other source (like opencores.org), were unchanged. New license looks as follows: Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. Each core or library found in this collection may have its own licensing terms. The user should keep this in in mind while exploring these cores. Redistribution and use in source and binary forms, with or without modification of this file, are permitted under the terms of either (at the option of the user): 1. The GNU General Public License version 2 as published by the Free Software Foundation, which can be found in the top level directory, or at: https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html OR 2. An ADI specific BSD license as noted in the top level directory, or on-line at: https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 08:44:52 +00:00
//
// OR
//
license: Add some clarification to the header license
2017-05-31 15:15:24 +00:00
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
license: Update license terms in hdl source files Fix a few gramatical error, fix the path of the top level license files.
2017-05-29 06:55:41 +00:00
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
module axi_ad9361_tx #(
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// parameters
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
parameter ID = 0,
Add FPGA info parameters flow Common basic steps: - Include/create infrastructure: * Intel: - require quartus::device package - set_module_property VALIDATION_CALLBACK info_param_validate * Xilinx - add bd.tcl, containing init{} procedure. The init procedure will be called when the IP will be instantiated into the block design. - add to the xilinx_blockdiagram file group the bd.tcl and common_bd.tcl - create GUI files - add parameters in *_ip.tcl and *_hw.tcl (adi_add_auto_fpga_spec_params) - add/propagate the info parameters through the IP verilog files axi_clkgen util_adxcvr ad_ip_jesd204_tpl_adc ad_ip_jesd204_tpl_dac axi_ad5766 axi_ad6676 axi_ad9122 axi_ad9144 axi_ad9152 axi_ad9162 axi_ad9250 axi_ad9265 axi_ad9680 axi_ad9361 axi_ad9371 axi_adrv9009 axi_ad9739a axi_ad9434 axi_ad9467 axi_ad9684 axi_ad9963 axi_ad9625 axi_ad9671 axi_hdmi_tx axi_fmcadc5_sync
2019-01-11 08:54:16 +00:00
parameter FPGA_TECHNOLOGY = 0,
parameter FPGA_FAMILY = 0,
parameter SPEED_GRADE = 0,
parameter DEV_PACKAGE = 0,
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
parameter MODE_1R1T = 0,
axi_ad9361: Fix the last incorrect merge The last merge broke a couple of source files of this core. This commit brings all the core to a functional state.
2017-10-03 08:07:42 +00:00
parameter CLK_EDGE_SEL = 0,
axi_ad9361: Update the PPS receiver module + Add a HDL parameter for the PPS receiver module : PPS_RECEIVER_ENABLE. By default the module is disabled. + Add the CMOS_OR_LVDS_N and PPS_RECEIVER_ENABLE into the CONFIG register + Define a pps_status read only register, which will be asserted, if the free running counter reach a certain fixed threshold. (2^28) The register can be deasserted by an incomming PPS only.
2017-08-02 15:31:46 +00:00
parameter CMOS_OR_LVDS_N = 0,
parameter PPS_RECEIVER_ENABLE = 0,
axi_ad9361- add receive init delay
2017-03-13 20:28:38 +00:00
parameter INIT_DELAY = 0,
axi_ad9361: Updates for ad_dds phase acc wrapper
2018-06-06 09:24:47 +00:00
parameter DAC_DDS_DISABLE = 0,
parameter DAC_DDS_TYPE = 1,
parameter DAC_DDS_CORDIC_DW = 14,
parameter DAC_DDS_CORDIC_PHASE_DW = 13,
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
parameter USERPORTS_DISABLE = 0,
parameter DELAYCNTRL_DISABLE = 0,
parameter IQCORRECTION_DISABLE = 0) (
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// dac interface
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
input dac_clk,
output dac_valid,
output [47:0] dac_data,
output dac_clksel,
output dac_r1_mode,
input [47:0] adc_data,
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// delay interface
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
output [15:0] up_dld,
output [79:0] up_dwdata,
input [79:0] up_drdata,
input delay_clk,
output delay_rst,
input delay_locked,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// master/slave
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
input dac_sync_in,
output dac_sync_out,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// dma interface
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
output dac_enable_i0,
output dac_valid_i0,
input [15:0] dac_data_i0,
output dac_enable_q0,
output dac_valid_q0,
input [15:0] dac_data_q0,
output dac_enable_i1,
output dac_valid_i1,
input [15:0] dac_data_i1,
output dac_enable_q1,
output dac_valid_q1,
input [15:0] dac_data_q1,
input dac_dunf,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// gpio
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
input [31:0] up_dac_gpio_in,
output [31:0] up_dac_gpio_out,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
axi_ad9361: ad_pps_receiver integration The ad_pps_receiver is instantiated at the top of core. The rcounter is placed into adc/dac_common registers space, at the address 0x30 (word aligned). The interrupt mask is placed into adc/dac_common, at the address 0x04 (word aligned). Because the core has an instance of both modules, the interrupt masks are OR-ed together.
2017-07-28 06:57:13 +00:00
// 1PPS reporting counter and interrupt
input [31:0] up_pps_rcounter,
axi_ad9361: Update the PPS receiver module + Add a HDL parameter for the PPS receiver module : PPS_RECEIVER_ENABLE. By default the module is disabled. + Add the CMOS_OR_LVDS_N and PPS_RECEIVER_ENABLE into the CONFIG register + Define a pps_status read only register, which will be asserted, if the free running counter reach a certain fixed threshold. (2^28) The register can be deasserted by an incomming PPS only.
2017-08-02 15:31:46 +00:00
input up_pps_status,
axi_ad9361: ad_pps_receiver integration The ad_pps_receiver is instantiated at the top of core. The rcounter is placed into adc/dac_common registers space, at the address 0x30 (word aligned). The interrupt mask is placed into adc/dac_common, at the address 0x04 (word aligned). Because the core has an instance of both modules, the interrupt masks are OR-ed together.
2017-07-28 06:57:13 +00:00
output up_pps_irq_mask,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// processor interface
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
input up_rstn,
input up_clk,
input up_wreq,
input [13:0] up_waddr,
input [31:0] up_wdata,
output up_wack,
input up_rreq,
input [13:0] up_raddr,
output [31:0] up_rdata,
output up_rack);
// configuration settings
axi_ad9361: Update the PPS receiver module + Add a HDL parameter for the PPS receiver module : PPS_RECEIVER_ENABLE. By default the module is disabled. + Add the CMOS_OR_LVDS_N and PPS_RECEIVER_ENABLE into the CONFIG register + Define a pps_status read only register, which will be asserted, if the free running counter reach a certain fixed threshold. (2^28) The register can be deasserted by an incomming PPS only.
2017-08-02 15:31:46 +00:00
localparam CONFIG = (PPS_RECEIVER_ENABLE * 256) +
(CMOS_OR_LVDS_N * 128) +
axi_ad9361: Updates for ad_dds phase acc wrapper
2018-06-06 09:24:47 +00:00
(DAC_DDS_DISABLE * 64) +
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
(DELAYCNTRL_DISABLE * 32) +
(MODE_1R1T * 16) +
(USERPORTS_DISABLE * 8) +
(IQCORRECTION_DISABLE * 1);
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// internal registers
reg dac_data_sync = 'd0;
axi dac cores: Add missing ports to up_dac_common instance
2017-05-12 10:37:34 +00:00
reg [15:0] dac_rate_cnt = 'd0;
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
reg dac_valid_int = 'd0;
reg dac_valid_i0_int = 'd0;
reg dac_valid_q0_int = 'd0;
reg dac_valid_i1_int = 'd0;
reg dac_valid_q1_int = 'd0;
reg up_wack_int = 'd0;
reg up_rack_int = 'd0;
reg [31:0] up_rdata_int = 'd0;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// internal clock and resets
wire dac_rst;
// internal signals
wire dac_data_sync_s;
wire dac_dds_format_s;
axi dac cores: Add missing ports to up_dac_common instance
2017-05-12 10:37:34 +00:00
wire [15:0] dac_datarate_s;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
wire [47:0] dac_data_int_s;
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
wire [ 5:0] up_wack_s;
wire [ 5:0] up_rack_s;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
wire [31:0] up_rdata_s[0:5];
// master/slave
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
assign dac_data_sync_s = (ID == 0) ? dac_sync_out : dac_sync_in;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
always @(posedge dac_clk) begin
dac_data_sync <= dac_data_sync_s;
end
// rate counters and data sync signals
always @(posedge dac_clk) begin
axi_ad9361: Fix dac_datarate counter implementation Update the dac_data_rate counter inmplementation to be infered as a loadable down counter. This patch will prevent failing paths inside the counter.
2017-10-11 09:07:28 +00:00
if (dac_rst == 1'b1) begin
dac_rate_cnt <= 16'b0;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
end else begin
axi_ad9361: Fix dac_datarate counter implementation Update the dac_data_rate counter inmplementation to be infered as a loadable down counter. This patch will prevent failing paths inside the counter.
2017-10-11 09:07:28 +00:00
if ((dac_data_sync == 1'b1) || (dac_rate_cnt == 16'd0)) begin
dac_rate_cnt <= dac_datarate_s;
end else begin
dac_rate_cnt <= dac_rate_cnt - 1'b1;
end
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
end
end
// dma interface
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
assign dac_valid = dac_valid_int;
assign dac_valid_i0 = dac_valid_i0_int;
assign dac_valid_q0 = dac_valid_q0_int;
assign dac_valid_i1 = dac_valid_i1_int;
assign dac_valid_q1 = dac_valid_q1_int;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
always @(posedge dac_clk) begin
axi dac cores: Add missing ports to up_dac_common instance
2017-05-12 10:37:34 +00:00
dac_valid_int <= (dac_rate_cnt == 16'd0) ? 1'b1 : 1'b0;
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
dac_valid_i0_int <= dac_valid_int;
dac_valid_q0_int <= dac_valid_int;
dac_valid_i1_int <= dac_valid_int & ~dac_r1_mode;
dac_valid_q1_int <= dac_valid_int & ~dac_r1_mode;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
end
// processor read interface
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
assign up_wack = up_wack_int;
assign up_rack = up_rack_int;
assign up_rdata = up_rdata_int;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
up_wack_int <= 'd0;
up_rack_int <= 'd0;
up_rdata_int <= 'd0;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
end else begin
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
up_wack_int <= | up_wack_s;
up_rack_int <= | up_rack_s;
up_rdata_int <= up_rdata_s[0] | up_rdata_s[1] | up_rdata_s[2] |
up_rdata_s[3] | up_rdata_s[4] | up_rdata_s[5];
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
end
end
// dac channel
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
axi_ad9361_tx_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.CHANNEL_ID (0),
.Q_OR_I_N (0),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.DISABLE (0),
axi_ad9361: Updates for ad_dds phase acc wrapper
2018-06-06 09:24:47 +00:00
.DAC_DDS_DISABLE (DAC_DDS_DISABLE),
.DAC_DDS_TYPE (DAC_DDS_TYPE),
.DAC_DDS_CORDIC_DW (DAC_DDS_CORDIC_DW),
.DAC_DDS_CORDIC_PHASE_DW (DAC_DDS_CORDIC_PHASE_DW),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.USERPORTS_DISABLE (USERPORTS_DISABLE),
.IQCORRECTION_DISABLE (IQCORRECTION_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_tx_channel_0 (
.dac_clk (dac_clk),
.dac_rst (dac_rst),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.dac_valid (dac_valid_int),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.dma_data (dac_data_i0),
.adc_data (adc_data[11:0]),
.dac_data (dac_data[11:0]),
.dac_data_out (dac_data_int_s[11:0]),
.dac_data_in (dac_data_int_s[23:12]),
.dac_enable (dac_enable_i0),
.dac_data_sync (dac_data_sync),
.dac_dds_format (dac_dds_format_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[0]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[0]),
.up_rack (up_rack_s[0]));
// dac channel
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
axi_ad9361_tx_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.CHANNEL_ID (1),
.Q_OR_I_N (1),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.DISABLE (0),
axi_ad9361: Updates for ad_dds phase acc wrapper
2018-06-06 09:24:47 +00:00
.DAC_DDS_DISABLE (DAC_DDS_DISABLE),
.DAC_DDS_TYPE (DAC_DDS_TYPE),
.DAC_DDS_CORDIC_DW (DAC_DDS_CORDIC_DW),
.DAC_DDS_CORDIC_PHASE_DW (DAC_DDS_CORDIC_PHASE_DW),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.USERPORTS_DISABLE (USERPORTS_DISABLE),
.IQCORRECTION_DISABLE (IQCORRECTION_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_tx_channel_1 (
.dac_clk (dac_clk),
.dac_rst (dac_rst),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.dac_valid (dac_valid_int),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.dma_data (dac_data_q0),
.adc_data (adc_data[23:12]),
.dac_data (dac_data[23:12]),
.dac_data_out (dac_data_int_s[23:12]),
.dac_data_in (dac_data_int_s[11:0]),
.dac_enable (dac_enable_q0),
.dac_data_sync (dac_data_sync),
.dac_dds_format (dac_dds_format_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[1]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[1]),
.up_rack (up_rack_s[1]));
// dac channel
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
axi_ad9361_tx_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.CHANNEL_ID (2),
.Q_OR_I_N (0),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.DISABLE (MODE_1R1T),
axi_ad9361: Updates for ad_dds phase acc wrapper
2018-06-06 09:24:47 +00:00
.DAC_DDS_DISABLE (DAC_DDS_DISABLE),
.DAC_DDS_TYPE (DAC_DDS_TYPE),
.DAC_DDS_CORDIC_DW (DAC_DDS_CORDIC_DW),
.DAC_DDS_CORDIC_PHASE_DW (DAC_DDS_CORDIC_PHASE_DW),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.USERPORTS_DISABLE (USERPORTS_DISABLE),
.IQCORRECTION_DISABLE (IQCORRECTION_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_tx_channel_2 (
.dac_clk (dac_clk),
.dac_rst (dac_rst),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.dac_valid (dac_valid_int),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.dma_data (dac_data_i1),
.adc_data (adc_data[35:24]),
.dac_data (dac_data[35:24]),
.dac_data_out (dac_data_int_s[35:24]),
.dac_data_in (dac_data_int_s[47:36]),
.dac_enable (dac_enable_i1),
.dac_data_sync (dac_data_sync),
.dac_dds_format (dac_dds_format_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[2]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[2]),
.up_rack (up_rack_s[2]));
// dac channel
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
axi_ad9361_tx_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.CHANNEL_ID (3),
.Q_OR_I_N (1),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.DISABLE (MODE_1R1T),
axi_ad9361: Updates for ad_dds phase acc wrapper
2018-06-06 09:24:47 +00:00
.DAC_DDS_DISABLE (DAC_DDS_DISABLE),
.DAC_DDS_TYPE (DAC_DDS_TYPE),
.DAC_DDS_CORDIC_DW (DAC_DDS_CORDIC_DW),
.DAC_DDS_CORDIC_PHASE_DW (DAC_DDS_CORDIC_PHASE_DW),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.USERPORTS_DISABLE (USERPORTS_DISABLE),
.IQCORRECTION_DISABLE (IQCORRECTION_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_tx_channel_3 (
.dac_clk (dac_clk),
.dac_rst (dac_rst),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.dac_valid (dac_valid_int),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.dma_data (dac_data_q1),
.adc_data (adc_data[47:36]),
.dac_data (dac_data[47:36]),
.dac_data_out (dac_data_int_s[47:36]),
.dac_data_in (dac_data_int_s[35:24]),
.dac_enable (dac_enable_q1),
.dac_data_sync (dac_data_sync),
.dac_dds_format (dac_dds_format_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[3]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[3]),
.up_rack (up_rack_s[3]));
// dac common processor interface
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
up_dac_common #(
.ID (ID),
Add FPGA info parameters flow Common basic steps: - Include/create infrastructure: * Intel: - require quartus::device package - set_module_property VALIDATION_CALLBACK info_param_validate * Xilinx - add bd.tcl, containing init{} procedure. The init procedure will be called when the IP will be instantiated into the block design. - add to the xilinx_blockdiagram file group the bd.tcl and common_bd.tcl - create GUI files - add parameters in *_ip.tcl and *_hw.tcl (adi_add_auto_fpga_spec_params) - add/propagate the info parameters through the IP verilog files axi_clkgen util_adxcvr ad_ip_jesd204_tpl_adc ad_ip_jesd204_tpl_dac axi_ad5766 axi_ad6676 axi_ad9122 axi_ad9144 axi_ad9152 axi_ad9162 axi_ad9250 axi_ad9265 axi_ad9680 axi_ad9361 axi_ad9371 axi_adrv9009 axi_ad9739a axi_ad9434 axi_ad9467 axi_ad9684 axi_ad9963 axi_ad9625 axi_ad9671 axi_hdmi_tx axi_fmcadc5_sync
2019-01-11 08:54:16 +00:00
.FPGA_TECHNOLOGY (FPGA_TECHNOLOGY),
.FPGA_FAMILY (FPGA_FAMILY),
.SPEED_GRADE (SPEED_GRADE),
.DEV_PACKAGE (DEV_PACKAGE),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.CONFIG (CONFIG),
axi_ad9361: Fix the last incorrect merge The last merge broke a couple of source files of this core. This commit brings all the core to a functional state.
2017-10-03 08:07:42 +00:00
.CLK_EDGE_SEL (CLK_EDGE_SEL),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.DRP_DISABLE (1),
axi_*: Fix instantiation of up_[adc|dac]_[common|channel] A couple of new parameters and new ports are missing in several up_[adc|dac]_[common|channel] instance, and generates warnings. The rule of thumb is to use full instantiations, defining all the existing parameter and ports of the module. Fix all the instantiation of up_[adc|dac]_[common|channel], by defining all its parameters and ports.
2018-02-16 09:57:48 +00:00
.USERPORTS_DISABLE (USERPORTS_DISABLE),
.GPIO_DISABLE (0))
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
i_up_dac_common (
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.mmcm_rst (),
.dac_clk (dac_clk),
.dac_rst (dac_rst),
.dac_sync (dac_sync_out),
.dac_frame (),
library/ad9361- add dac clk sel
2016-08-26 14:30:46 +00:00
.dac_clksel (dac_clksel),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.dac_par_type (),
.dac_par_enb (),
.dac_r1_mode (dac_r1_mode),
.dac_datafmt (dac_dds_format_s),
.dac_datarate (dac_datarate_s),
.dac_status (1'b1),
.dac_status_unf (dac_dunf),
.dac_clk_ratio (32'd1),
hdl/library- fix syntax errors/synthesis warnings
2017-07-20 18:07:19 +00:00
.up_dac_ce (),
axi_ad9361: ad_pps_receiver integration The ad_pps_receiver is instantiated at the top of core. The rcounter is placed into adc/dac_common registers space, at the address 0x30 (word aligned). The interrupt mask is placed into adc/dac_common, at the address 0x04 (word aligned). Because the core has an instance of both modules, the interrupt masks are OR-ed together.
2017-07-28 06:57:13 +00:00
.up_pps_rcounter (up_pps_rcounter),
axi_ad9361: Update the PPS receiver module + Add a HDL parameter for the PPS receiver module : PPS_RECEIVER_ENABLE. By default the module is disabled. + Add the CMOS_OR_LVDS_N and PPS_RECEIVER_ENABLE into the CONFIG register + Define a pps_status read only register, which will be asserted, if the free running counter reach a certain fixed threshold. (2^28) The register can be deasserted by an incomming PPS only.
2017-08-02 15:31:46 +00:00
.up_pps_status (up_pps_status),
axi_ad9361: ad_pps_receiver integration The ad_pps_receiver is instantiated at the top of core. The rcounter is placed into adc/dac_common registers space, at the address 0x30 (word aligned). The interrupt mask is placed into adc/dac_common, at the address 0x04 (word aligned). Because the core has an instance of both modules, the interrupt masks are OR-ed together.
2017-07-28 06:57:13 +00:00
.up_pps_irq_mask (up_pps_irq_mask),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.up_drp_sel (),
.up_drp_wr (),
.up_drp_addr (),
.up_drp_wdata (),
up_drp : Update the DRP interface to support Altera platforms
2016-09-21 12:00:45 +00:00
.up_drp_rdata (32'd0),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.up_drp_ready (1'd0),
.up_drp_locked (1'd1),
.up_usr_chanmax (),
.dac_usr_chanmax (8'd3),
.up_dac_gpio_in (up_dac_gpio_in),
.up_dac_gpio_out (up_dac_gpio_out),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[4]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[4]),
.up_rack (up_rack_s[4]));
axi_ad9361: Add parameter R1_MODE_EN R1_MODE_EN can disable the second I/Q channel of the core. This way the user can save resources by cutting down the size of the core.
2016-09-09 13:34:11 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// dac delay control
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
up_delay_cntrl #(
.DISABLE (DELAYCNTRL_DISABLE),
axi_ad9361- add receive init delay
2017-03-13 20:28:38 +00:00
.INIT_DELAY (INIT_DELAY),
ad9361- dac data path split
2016-09-23 20:13:46 +00:00
.DATA_WIDTH(16),
.BASE_ADDRESS(6'h12))
i_delay_cntrl (
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked),
.up_dld (up_dld),
.up_dwdata (up_dwdata),
.up_drdata (up_drdata),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[5]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[5]),
.up_rack (up_rack_s[5]));
endmodule
// ***************************************************************************
// ***************************************************************************